Changed images for migrated plugins

UMEP-dev · Mar 2, 2023 · 43da65a · 43da65a
1 parent 5b0d086
commit 43da65a
Show file tree

Hide file tree

Showing 10 changed files with 10 additions and 60 deletions.
diff --git a/docs/source/Introduction.rst b/docs/source/Introduction.rst
@@ -120,9 +120,9 @@ Pre-Processor
    * - `Land Cover Reclassifier <LandCoverReclassifier>`
      - Reclassifies a grid into UMEP format land cover grid. *Land surface models* (M)
    * - `Land Cover Fraction (Point) <LandCoverFraction(Point)>`
-     - Land cover fractions estimates from a land cover grid based on a specific point in space. (PM)
+     - Land cover fractions estimates from a land cover grid based on a specific point in space. (P)
    * - `Land Cover Fraction (Grid) <LandCoverFraction(Grid)>`
-     - Land cover fractions estimates from a land cover grid based on a polygon grid (PM)
+     - Land cover fractions estimates from a land cover grid based on a polygon grid (P)
 
 **Urban Morphology**
 
@@ -131,9 +131,9 @@ Pre-Processor
    :header-rows: 0
 
    * - `Morphometric Calculator (Point) <MorphometricCalculator(Point)>`
-     - Morphometric parameters from a DSM based on a specific point in space. (PM)
+     - Morphometric parameters from a DSM based on a specific point in space. (P)
    * - `Morphometric Calculator (Grid) <MorphometricCalculator(Grid)>`__
-     - Morphometric parameters estimated from a DSM based on a polygon grid. (PM)
+     - Morphometric parameters estimated from a DSM based on a polygon grid. (P)
    * - `Source Area Model (Point) <SourceArea(Point)>`
      - Source area calculated from a DSM based on a specific point in space. *Interpretation of observations* (M)
 

diff --git a/docs/source/images/LandCoverFractionGrid.jpg b/docs/source/images/LandCoverFractionGrid.jpg
diff --git a/docs/source/images/LandCoverFractionPoint.jpg b/docs/source/images/LandCoverFractionPoint.jpg
diff --git a/docs/source/images/Morph_Calc.jpg b/docs/source/images/Morph_Calc.jpg
diff --git a/docs/source/images/Morph_Calc_point.jpg b/docs/source/images/Morph_Calc_point.jpg
diff --git a/docs/source/images/Morph_Calc_point.png b/docs/source/images/Morph_Calc_point.png
diff --git a/docs/source/pre-processor/Urban Land Cover Land Cover Fraction (Grid).rst b/docs/source/pre-processor/Urban Land Cover Land Cover Fraction (Grid).rst
@@ -18,23 +18,11 @@ Urban Land Cover: Land Cover Fraction (Grid)
       The Land Cover Fraction (Grid) plugin calculates land cover fractions required for UMEP (see `Land Cover Reclassifier <LandCoverReclassifier>`) from a point location based on a land cover raster grid. A land cover grid suitable for the processor in UMEP can be derived using the Land Cover Classifier. The fraction will vary depending on what angle (wind direction) you are interested in. Thus, this plugin is able to derive the land cover fractions for different directions. It is the same as the Land Cover Fraction (Point) except that this plugin calculates the fractions for each polygon object in polygon vector layer. The polygons should preferable be squares or any other regular shape. To create such a grid, built in functions in QGIS can be used (see *Vector -> Research Tools -> Vector Grid...*).   |
 
 * Dialog Box
-      .. figure:: /images/LandCoverFractionGrid2.png
+      .. figure:: /images/LandCoverFractionGrid.jpg
           :align: center
 
           The dialog for the Land Cover Fraction (Grid) calculator
 
-* Dialog sections
-    .. list-table::
-       :widths: 10 90
-       :header-rows: 0
-
-       * - upper
-         - Sets the parameters for the area of interest where the fractions are calculated. You also set the search interval in degrees and from where the search should take place within each grid.
-       * - middle
-         - Specifies the input data regarding polygon layer and the land cover raster grid that should be used.
-       * - lower
-         - Specifies output and runs the calculations.
-
 * Search Throughout the Grid Extent
      Select if the search should be performed from one side of the grid to the opposite side. Select the other option (Search from Grid Centroid) if the search should start from the centroid of the grid. Setting the **Search distance** can then allow for the search to extent beyond the grid. See the figure below for illustration. The left performs a search using the grid extent whereas the right illustrates a search from the centroid and extending outside of the grid.
 

diff --git a/docs/source/pre-processor/Urban Land Cover Land Cover Fraction (Point).rst b/docs/source/pre-processor/Urban Land Cover Land Cover Fraction (Point).rst
@@ -22,23 +22,11 @@ Urban Land Cover: Land Cover Fraction (Point)
       A land cover grid suitable for the processor in UMEP can be derived using the Land Cover Classifier. The fraction will vary depending on what angle (wind direction) you are interested in. Thus, this plugin is able to derive the land cover fractions for different directions.
 
 * Dialog box
-      .. figure:: /images/Land_Cover_Reclass.png
+      .. figure:: /images/LandCoverFractionPoint.jpg
           :align: center
 
           The dialog for the Land Cover Fraction (Point) calculator
 
-* Dialog section
-   .. list-table::
-      :widths: 10 90
-      :header-rows: 0
-
-      * - upper
-        - Select a point on the map canvas by either clicking a location or selecting an existing point from a point vector layer.
-      * - middle
-        - Specify the area of interest where the morphometric parameters are calculated. Set the search interval in degrees.
-      * - lower
-        - Specify the input data regarding land cover fraction raster as well as specifying output and for running the calculations.
-
 * Select Point on Canvas
      Click to create a point from where the calculations will take place. When you click the button, the plugin will be disabled until you have clicked the map canvas.
 

diff --git a/docs/source/pre-processor/Urban Morphology Morphometric Calculator (Grid).rst b/docs/source/pre-processor/Urban Morphology Morphometric Calculator (Grid).rst
@@ -24,25 +24,13 @@ Urban Morphology: Morphometric Calculator (Grid)
 * Introduction
      The Morphometric Calculator (Grid) pre-processor calculates various morphometric parameters based on digital surface models.
 
-
 * Dialog box
-        .. figure:: /images/Morph_Calc.png
+        .. figure:: /images/Morph_Calc.jpg
             :align: center
+            :width: 100%
 
             The dialog for the Morphometric Calculator (Grid)
 
-* Dialog sections
-   .. list-table::
-      :widths: 10 90
-      :header-rows: 0
-
-      * - upper
-        - Specifies the area of interest where the morphometric parameters are calculated. Set the search interval in degrees and from where the search should take place within each gri
-      * - middle
-        - Specifies the input data regarding 3D objects and ground as well as specifying what grid that should be used.
-      * - lower
-        - Specifies output and runs the calculations.
-
 * Search Throughout the Grid Extent
      Select if the search should be performed from one side of the grid to the opposite side.
      Select the other option (Search from Grid Centroid if the search should start from the centroid of the grid. Setting the **Search distance** can then allow for the search to extent beyond the grid. See the figure below for illustration. The left one performs a search using the grid extent whereas the right illustrates a search from the centroid and extending outside of the grid.

diff --git a/docs/source/pre-processor/Urban Morphology Morphometric Calculator (Point).rst b/docs/source/pre-processor/Urban Morphology Morphometric Calculator (Point).rst
@@ -45,26 +45,12 @@ Urban Morphology: Morphometric Calculator (Point)
        - Height above ground where the wind speed is 0 m s\ :sup:`-1` as a result of obstacles to the flow such as trees or buildings [m].
 
 * Dialog box
-    .. figure:: /images/Morph_Calc_point.png
+    .. figure:: /images/Morph_Calc_point.jpg
         :align: center
+        :width: 100%
 
         The dialog for the Morphometric Calculator (Point)
 
-* Dialog sections
-   .. list-table::
-      :widths: 10 90
-      :header-rows: 0
-
-      * - upper
-        - Select a point on the map canvas by either clicking at a location or by selecting an existing point from a point vector layer.
-      * - middle upper
-        - -  Set the parameters for the area of interest where the morphometric parameters are calculated.
-          -  Set the search interval in degrees.
-      * - middle lower
-        - Specify the input data regarding buildings and ground.
-      * - lower
-        - Specify output and run the calculations.
-
 * Select Point on Canvas
      Click on this button to create a point from where the calculations will take place. When you click button, the plugin will be disabled until you have clicked the map canvas.