-
-
Notifications
You must be signed in to change notification settings - Fork 2k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Cura dosnt uses all my RAM (it gets slow to slice) #7963
Comments
Thanks for the report. Please save a project file (File -> Save...), zip up the .3mf file and attach to this issue so we can try to reproduce it. If you haven't already, please can you attach a log file. |
https://drive.google.com/file/d/1MdPco_KKIwt8HivkuXsDn3l2RAGX81eh/view?usp=sharing After all i think that my PC maybe has a virus or one program is making my pc limited on RAM... Im not sure |
https://drive.google.com/file/d/1MdPco_KKIwt8HivkuXsDn3l2RAGX81eh/view?usp=sharing
This is the Link of the STL File that i used; i let it for like 5 hs and
Cura load it, (shows it in Yellow) but when i tried to slice it... HA, my
pc just can't handle it, starts but inmediately gets laggy (Lagged) and
slows all my pc; after all i need to Restart my pc (i unplugged it and plug
it again)
i used 0.06 mm Layer Height
3 Shells
PLA Filament (215 Cº Extrussor Temp.) (50 Cº Bed Temp.)
After all, I think that my PC maybe has a virus or one program is making my
PC limited on RAM... I'm not sure
When i restarted the PC again (after unplugged it and plugged it again)
Windows tells me that has an internal error; and won't open, Windows tell
me that i can "Restore" from an after backup; i did that; but it simply
uninstalled all the programs, like "Factory Sealed" Windows... but keeps
the PDF files and that things (PDF, Images, and more. It only uninstalled
the programs)
For this reason I'm not sure if this is a Virus of my PC or when I
unplugged the pc something failed and became a chain of errors. i'm
pretty sure that Cura is not the cause of the failure; but idk, check it
from the STL
Lesson learned: Make Backups haha
Cheers and Thanks for replying
El lun., 22 de jun. de 2020 a la(s) 11:03, maht (notifications@github.com)
escribió:
… Thanks for the report. Please save a project file (File -> Save...), zip
up the .3mf file and attach to this issue so we can try to reproduce it.
If you haven't already, please can you attach a log file
<https://github.com/Ultimaker/Cura#logging-issues>.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#7963 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO6PU7ZYNMGA6MZGUN5KGRTRX5QCXANCNFSM4OEFUTYA>
.
|
Ok, I wasn't able to reproduce this either. Will close this off then. Good luck! |
hi, first i need to say that my english isnt perfect; im from Argentina, i have more or less knowledge of 3D Printing; but a lot of knowledge 3D Designing
2 Problem
the First Is: I have a big STL file; its arround 300MB, yeah, its heavy...
When i try to open it with Ultimaker Cura, it doesnt show up, its stays loading... and never ends.
i let it load for like 3 hours and still going; the "line of charge" isnt move...
The other thing is that when i look at "Administrador De Tareas" (a window wich shows the programs that are runing and what their are consuming in terms of RAM or CPU, and other things) there it shows that Ultimaker Cura is using 400Mb of RAM. This is very Low, i mean; with others programs that i use to handle Big STL uses like 3.000MB of RAM... my PC can handle it
So... there is a way to increase the "Slicing Capability" of Cura to make it load the STL files like real quick? Its like the Ultimaker Cura is locked on a max of 700MB of RAM... Somewhere over there... But not the 3.000MB that im witing for xd
so, there is a way to make Cura RAM "Unlimit"?
Application version
(( 4.1.0 ))
Platform
Im using Windows 10, Desktop PC; i have 8GB of RAM (arround 7GB usable)
Printer
i have a Custom printer; my one is Hellbot Magna 1 (like Ender 3); uses Marlin Code (and Gcode)
Reproduction steps
Screenshot(s)
i Dont have screenshots, on Cura it shows "Loading /name_of_file/"
The text was updated successfully, but these errors were encountered: