Eclipse project, README, small fixes

.project

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>OPWiki</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.python.pydev.PyDevBuilder</name>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.python.pydev.pythonNature</nature>
+	</natures>
+</projectDescription>

.settings/org.eclipse.core.resources.prefs

@@ -0,0 +1,2 @@
+eclipse.preferences.version=1
+encoding//source/conf.py=utf-8

README.rst

@@ -0,0 +1,8 @@
+OpenPilot archived wiki
+=======================
+
+All text information still available in Google cache, but most pictures and
+all attachement files was lost :(.
+
+See this docs on `ReadTheDocs <http://opwiki.readthedocs.org/en/latest/>`_
+

source/conf.py

@@ -48,7 +48,7 @@
 # General information about the project.
 project = u'OpenPilot Wiki'
 
-copyright = u''
+copyright = u'OpenPilot community'
 
 
 # The version info for the project you're documenting, acts as replacement for
@@ -59,7 +59,7 @@
 version = u'0.1'
 
 # The full version, including alpha/beta/rc tags.
-release = u'0.1.0'
+release = u'0.1.1'
 
 
 # The language for content autogenerated by Sphinx. Refer to documentation

source/user_manual/cc3d.rst

@@ -181,7 +181,7 @@ Power
 * Power consumption = ±70mA.
 * You can connect the USB and the receiver (with the power) at the same time.
 
-.. warning:: The PWR Out pins provide unregulated voltage to the ports. If the
+.. caution:: The PWR Out pins provide unregulated voltage to the ports. If the
    CC is powered from a +15V (max. allowed) source then +15V will be on the
    PWR Out pins and can damage connected receivers, GPS, telemetry modems or
    other add-on boards.
@@ -281,10 +281,10 @@ MainPort and FlexiPort serial cable pinout
 
 .. image:: /img/JSH-SH-4pin.png
 
-.. warning:: The Spektrum adapter should only be powered by 3.3V, a step down
+.. caution:: The Spektrum adapter should only be powered by 3.3V, a step down
    adapter must be used.
 
-.. warning:: The PWR Out voltage is dependent on the CC supplied voltage.
+.. caution:: The PWR Out voltage is dependent on the CC supplied voltage.
    Verify that you use the correct voltage for your S.BUS receiver.
 
 Receiver PWM connection

source/user_manual/first_flight.rst

@@ -64,7 +64,7 @@ motors are spinning up. If the opposite motors spin up, then you would flip
 your multi-rotor immediately upon lift off. In this case, you need to recheck
 your configuration.
 
-.. warning:: IMPORTANT! Check fail-safe.
+.. important:: Check fail-safe!
 
 Arm the aircraft and run your motors, now turn off the transmitter and confirm
 that all motors stop.
@@ -89,7 +89,7 @@ a road. A grass field is better for first flights, rather than concrete or
 tarmac. Ideally there will be no wind, but a very slight breeze shouldn't be
 a problem.
 
-.. warning:: **IMPORTANT**
+.. important::
 
    You may be disconnecting and connecting power to the model several times
    during these first steps - you must wait at least 30 seconds before