CFG-Util

Click here to get a windows build.

All builds starting with v1.1.0 are signed and should match this PGP fingerprint - BC8F F269 6555 1D18 0D77 3427 B11E 718B F4B7 47F9

Interact with bitcoin mining ASICs using a simple GUI.

---

Tabs:

• Scan
• Boards
• Pools
• Configure
• Command

Scan Tab -

Fields

• Scan IP: The IP/network to scan. Defaults to 192.168.0.1/24 subnet, and you can pass just a single IP address on a subnet, which will use /24 subnet as a default, or an IP range such as 192.168.1.20 - 192.168.1.55

Buttons

• Scan: Scan the network entered in Scan IP.
• ALL: Select all items in the table (You can also select the table and press CTRL+A).
• REFRESH DATA: Refresh the data for the miners in the table.
• OPEN IN WEB: Open all selected miners in your web browser.
• RECORD DATA: Open the record data window.

Boards Tab -

Buttons

• Create Report: Create a report about the status of all selected miners hashboards.
• ALL: Select all items in the table (You can also select the table and press CTRL+A).
• REFRESH DATA: Refresh the data for the miners in the table.
• OPEN IN WEB: Open all selected miners in your web browser.

Pools Tab -

Additional Tabs

• All: Data on both pools.
• Pool 1: Data on pool 1.
• Pool 2: Data on pool 2.

Buttons

• ALL: Select all items in the table (You can also select the table and press CTRL+A).
• REFRESH DATA: Refresh the data for the miners in the table.
• OPEN IN WEB: Open all selected miners in your web browser.

Configure Tab -

Fields

• Config Field: Located on the right side of the screen, this is where imported and generated configs are stored for editing.

Buttons

• IMPORT: Import a config from the selected miner.
• CONFIG: Configure all selected miners with the config in the config field.
• GENERATE: Generate a configuration.
• ALL: Select all items in the table (You can also select the table and press CTRL+A).
• OPEN IN WEB: Open all selected miners in your web browser.
• Append IP to Username: Append the last octet of the IP address to the config when configuring.

Command Tab -

Fields

• Custom Command: The custom command to send to the miners.

Buttons

• Send Command: Send the custom command in the custom command field to the selected miners.
• ALL: Select all items in the table (You can also select the table and press CTRL+A).
• LIGHT: Turn on the fault light on selected miners.
• REBOOT: Reboot selected miners.
• RESTART BACKEND: Restart the mining process on selected miners.