300mm-x-extruder

printer_mods/sgr33n/300mm-x-extruder-endcap/.metadata.yml

@@ -0,0 +1,30 @@
+---
+# The title of your mod. Choose a short and descriptive name
+title: 300mm X-Extruder Endcap
+# A short description of your mod. Try to describe your mod with 1-2 short sentences
+description: This mod makes stabler and prettier the use of a 300mm profile for the X-Extruder.
+# Mod version: Set this to 1 when you are submitting a new mod. When you make changes to your mod, you may increment this number
+mod_version: 1
+# You may add your discord username here so people can contact you about your mod
+discord_username: sgr33n
+# The CAD files for your mod. Please provide them as a list.
+# Note that each mod must include at least one CAD file.
+cad:
+- CAD/300mm_X-Extruder_Endcap.step
+# The parts of your mod, exported and oriented ready to be sliced. Please provide them as a list.
+# Note that each mod must include at least one STL or OBJ file.
+stl:
+- STL/x_extruder_endcap_left.stl
+- STL/x_extruder_endcap_right.stl
+# The image files provided with your mod. These may be instructions you use in your README.md file, or other additional pictures.
+# **Note that the first image specified here will be used as cover image on mods.vorondesign.com**
+# All paths are relative to this .metadata.yml file.
+images:
+- Images/300mm-X-Extruder-Endcap-X-Carriage.jpg
+- Images/300mm-X-Extruder-Endcap-X-2020-Profile.jpg
+# Printer compatibility. Please specify all compatible printers as a list. The following values are accepted:
+# "V0", "V0.1", "V0.2", "V0.2r1", "V1", "V1.6", "V1.8", "V1.8r1",  "V2", "V2.1", "V2.2", "V2.4", "V2.4r1", "V2.4r2", "VSW", "VT", "VTr1", "VL"
+# Please only specify printers that you have either tested your mod on yourself, or that someone else has tested for you. If you are unsure whether your
+# mod is compatible with a certain printer, don't list it here!
+printer_compatibility:
+- VSW

printer_mods/sgr33n/300mm-x-extruder-endcap/README.md

@@ -0,0 +1,11 @@
+# 300mm X-Extruder Endcap
+
+Endcaps that help using a 300mm X-Extruder 2020 profile. The Enderwire conversion involves chopping the original 320mm profile by 10mm to have a 310mm. This process is not really simple to everybody so I decided to buy a new profile. The problem was that finding a 310mm profile wasn't so simple because many shops had in 300mm and 350mm, so I used the 300 that fits perfectly and build these endcaps to fill the gaps. Anyway they are just for aesthetics and a bit of compactness because the extruder is in any case fixed on their original nuts.
+
+![The full carriage](Images/300mm-X-Extruder-Endcap-X-Carriage.jpg)
+
+![The profile](Images/300mm-X-Extruder-Endcap-X-2020-Profile.jpg)
+
+## Gallery
+![picture](Images/gallery-1.jpg)
+![picture](Images/gallery-2.jpg)