system-controller-app

Usage:

sc_app -c <command> [-t <target> [-v <value>]]

<command> - 
	version - version and build information
	board - name of the board
	reset - apply power-on-reset

	listfeature - list the supported features for this board

	listeeprom - list the supported EEPROM targets
	geteeprom - get the content of <target> EEPROM for either <value>:
		    'summary', 'all', 'common', 'board', or 'multirecord'

	listtemp - list the supported temperature sensor targets
	gettemp - get the reading of <target> temperature sensor

	listbootmode - list the supported boot mode targets
	getbootmode - get boot mode, with optional <value> of 'alternate'
	setbootmode - set boot mode to <target>, with optional <value> of 'alternate'

	listclock - list the supported clock targets
	getclock - get the frequency of <target>
	setclock - set <target> to <value> frequency
	setbootclock - set <target> to <value> frequency at boot time
	restoreclock - restore <target> to default value

	listvoltage - list the supported voltage targets
	getvoltage - get the voltage of <target>, with optional <value> of 'all'
	setvoltage - set <target> to <value> volts
	setbootvoltage - set <target> to <value> volts at boot time
	restorevoltage - restore <target> to default value

	listpower - list the supported power targets
	getpower - get the voltage, current, and power of <target>
	getcalpower - get the voltage, current, and power of custom calibrated <target>
	getINA226 - get the content of <target> registers
	setINA226 - set the 'Configuration', 'Calibration', 'Mask/Enable', and
		    'Alert Limit' registers of <target> to <value>

	listpowerdomain - list the supported power domain targets
	powerdomain - get the power used by <target> power domain

	listworkaround - list the applicable workaround targets
	workaround - apply <target> workaround (may requires <value>)

	listBIT - list the supported Board Interface Test targets
	BIT - run BIT target

	listddr - list the supported DDR DIMM targets
	getddr - get <target> DDR DIMM information for either <value>:
		 'spd' or 'temp'

	listgpio - list the supported gpio line targets
	getgpio - get the state of <target> gpio

	listioexp - list the supported IO expander targets
	getioexp - get the state of <target> IO expander for either <value>:
		   'all', 'input', or 'output'
	setdirioexp - set direction of <target> IO expander to <value>
	setoutioexp - set output of <target> IO expander to <value>
	restoreioexp - restore IO expander to default values

	listSFP - list the plugged SFP transceiver targets
	getSFP - get the transceiver information of <target> SFP

	listQSFP - list the plugged QSFP transceiver targets
	getQSFP - get the transceiver information of <target> QSFP

	listEBM - list the plugged EBM daughter card targets
	getEBM - get the content of EEPROM on <target> EBM card for either <value>:
		 'all', 'common', 'board', or 'multirecord'

	listFMC - list the plugged FMCs
	getFMC - get the content of EEPROM on <target> FMC for either <value>:
		 'all', 'common', 'board', or 'multirecord'