Skip to content

YichenRuan/P58_Loss

Repository files navigation

P58_Loss

插件安装说明

  1. 将PGCreator文件夹整体拷贝到Revit根目录下。例如D:\Revit 2016\
  2. 用记事本打开PGAP.addin文件,将Assembly标签的路径改为对应PGAP.dll的绝对路径,并保存更改
  3. 将更改后的PGAP.addin文件拷贝至以下路径(取决于Windows版本):
    C:\ProgramData\Autodesk\Revit\Addins\2016,或
    C:\Documents and Settings\All Users\Application Data\Autodesk\Revit\Addins\2016
  4. 启动Revit,打开项目文件,点击“附加模块”->“外部工具”->“PGAP”以启动插件
  5. 若运行出错,在Revit根目录下的PGCreator文件夹中可找到错误日志

注意:API版本为2016


P58_Loss

Install the plugin

  1. Copy the PGCreator folder (not in this repository) to the root directory of your Revit, e.g. D:\Revit 2016\
  2. Open PGAP.addin with your favorite text editor. Set the Assembly label to the absolute path of PGAP.dll, and save the change.
  3. Copy the modified PGAP.addin to the following path (depending on the version of your Windows):
    C:\ProgramData\Autodesk\Revit\Addins\2016, or
    C:\Documents and Settings\All Users\Application Data\Autodesk\Revit\Addins\2016
  4. Boot Revit, load the plugin by "Additional module"->"Plugins"->"PGAP"
  5. Should there be an error while executing, you can find the error log under path_to_Revit/PGCreator/

Note: API version 2016

About

Undergraduate Thesis Project

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published