Skip to content

Open-Source hardware Seaurchin/Qnithm/Laverita controller

License

Notifications You must be signed in to change notification settings

Yona-W/OpeNITHM

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

92 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

OpeNITHM

This repository contails files related to OpeNITHM.

Firmware, schematics, board layout, and CAD files are included in this repo. Please see the CAD directory for the original 3d printed version, or the v2-cad directory for the laser cut version.

List of Hardware

In the CAD\STL folder, you will find numerous parts that must be 3D printed.

Please check out the wiki for more information.

Part Qty
Center Frame 1
Right Frame 1
Left Frame 1
Key Dual 2.5mm OR Key Dual 3mm1 16
LED Support Peg 16
Sensor Rail 2
Sensor Spacer Left2 1
Sensor Base Left2 OR Integrated Sensor Base Left2 1
Sensor Cover Left2 1
Integrated Frame Mount Left2,3 1

NOTES:

  1. Use 2.5mm for 3/32" and 3mm for 1/8" acrylic.
  2. Print out mirrored version of these parts as well.
  3. Only print the frame mount if you are using the integrated sensor.

The non-printed materials and hardware include:

Part Qty
4-40 Flat Head Screw, length 3/16" to 5/16" will work OR M3 equivalent 2
Top Acrylic Plate1 (472mm x 112mm) 1
Key Acrylic1 (103.5mm x 26mm) 16
Copper Tape, cut into rectangles 95mm x 26mm 16

NOTES:

  1. Use 2.5mm (3/32") OR 3mm (1/8") acrylic. Use the same acrylic for top plate and keys.

List of Electronics

OpeNITHM is designed for the Teensy LC.

Why use Teensy and not Arduino?

The biggest reason is that Teensy has built in capacitive sensing, which is how OpeNITHM fuctions. You have to fake it on Arduino using very controlled analog reads, and it is nowhere near as sensitive. In my (VXZK's) experience, it was simply impossible to use an Arduino to do the capacitive sensing required for this project.

I chose the Teensy LC as it is the lowest cost Teensy model available with capacitive sensing. The firmware and PCB are designed for this board alone; significant modifications may be required for any other version.

There is an alternative build using an Arduino Pro Micro and 2 MPR121s as a branch in this repo, but it is not maintained and not recommended. You're on your own with that one!

Teensy LC Build

Links are mostly suggestions (except the Teensy, which is only officially available through the PJRC site and authorized resellers).
(VXZK: I've heard a lot of trouble regarding good quality IR leds and phototransistors, so I've included specific links to the ones I purchased and has worked well for me.)

The links below also assume you want to socket your Teensy and multiplexers for later use. You can solder them directly, if you'd like.
If you are going to solder your sensors directly to the PCB, it is not necessary buy the 0.1" Pin Header, Right Angle. Otherwise, include female 0.1" sockets for your sensors (commonly referred to as Dupont connectors).

Part Link Qty
Teensy LC https://www.pjrc.com/store/teensylc.html 1
Teensy LC Breakout Board this Github, Circuit-Teensy32 folder contains gerbers 1
74HC4051 Multiplexer Breakout Board Aliexpress 4
0.1" Pin Header, 1 row, 40 pos Aliexpress (qty 10) 2
0.1" Pin Header, Right Angle, 2 row, 24 pos LCSC 2
0.1" Socket, Straight, 1 row, 14 pos LCSC 2
0.1" Socket, Straight, 1 row, 5 pos LCSC 2
0.1" Socket, Straight, 1 row, 11 pos LCSC 2
0.1" Socket, Straight, 1 row, 8 pos LCSC 2
51k ohm Resistor, 1/6W or 1/8W LCSC or Aliexpress 6
33 ohm Resistor, 1/4W, 1/6W, or 1/8W LCSC or Aliexpress 3
1m WS2812B RGB 5V LED Strip, 30LED Per Meter Aliexpress 1
IR LED and Phototransistor Ebay (Qty 20 pairs) 6

Board Revision and Sensors

As of 2020-07-17, the recommended board version is v2.1, which features inputs for 32 sensors. This best replicates the feeling of the arcade. Previous versions used 16 sensors. If you still wish to make a 16 key version, you can order the v2.1 but only populate two of the multiplexers. This is not really recommended.

Installing on Teensy LC

NOTE: This firmware is only written to work for the Teensy LC. Do not use Teensy 2.0 or Teensy 3.x

Skip this section if you are using a Pro Micro.

Locate your arduino folder (usually C:\Program Files (x86)\arduino).

I have a fresh install of Teensyduino, or have never modified my USB profiles

Copy Firmware/Teensy/boards.txt to arduino\hardware\teensy\avr\ and overwrite the existing.

Copy Firmware/Teensy/teensy3 to arduino\hardware\teensy\avr\cores\teensy3 and overwrite any conflicts.

Copy Firmware/FastLED/WS2812Serial.cpp and Firmware/FastLED/WS2812Serial.h to arduino\hardware\teensy\avr\libraries\WS2812Serial and overwrite the existing.

Copy Firmware/FastLED/FastLED.cpp and Firmware/FastLED/FastLED.h to [My Documents]\Arduino\libraries\FastLED\ and overwrite the existing.

I am applying the changes manually

(It is easier to copy and paste from the files in Firmware/Teensy instead of through here, the below is just for reference.)

Add usb_nkro.c and usb_nkro.h to arduino\hardware\teensy\avr\cores\teensy3

In arduino\hardware\teesny\avr\boards.txt add lines 1175-1179

1175    teensyLC.menu.usb.nkrokeyboard=NKRO Keyboard
1176    teensyLC.menu.usb.nkrokeyboard.build.usbtype=USB_NKRO
1177    teensyLC.menu.usb.nkrokeyboard.fake_serial=teensy_gateway
1178    teensyLC.menu.usb.serialnkrokeyboard=Serial + NKRO Keyboard
1179    teensyLC.menu.usb.serialnkrokeyboard.build.usbtype=USB_SERIAL_NKRO

In `arduino\hardware\teensy\avr\cores\teensy3\WProgram.h` add line 59

```c
58    #include "usb_joystick.h"
59    #include "usb_nkro.h"
60    #include "usb_midi.h"

In arduino\hardware\teensy\avr\cores\teensy3\usb_inst.cpp add lines 75-77

72    usb_serial_class Serial;
73    #endif
74    
75    #ifdef NKRO_INTERFACE
76    usb_nkro_class Nkro;
77    #endif
78    
79    #else // F_CPU < 20 MHz

In arduino\hardware\teensy\avr\cores\teensy3\usb_dev.h add lines 93-98

90    extern volatile uint8_t keyboard_leds;
91    #endif
92    
93    #ifdef NKRO_INTERFACE
94    extern uint8_t nkro_report_data[NKRO_SIZE];
95    extern uint8_t nkro_protocol;
96    extern uint8_t nkro_idle_config;
97    extern uint8_t nkro_idle_count;
98    #endif
99    
100   #ifdef MIDI_INTERFACE

In arduino\hardware\teensy\avr\cores\teensy3\usb_desc.h add lines 868-948

866      #define ENDPOINT15_CONFIG	ENDPOINT_TRANSMIT_ONLY
867    
868    #elif defined(USB_NKRO)
869      #define VENDOR_ID		0x16C0
870      #define PRODUCT_ID		0x04D0
871      #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
872      #define MANUFACTURER_NAME_LEN	11
873      #define PRODUCT_NAME		{'N','K','R','O',' ','K','e','y','b','o','a','r','d'}
874     #define PRODUCT_NAME_LEN	13
875      #define EP0_SIZE		64
876      #define NUM_ENDPOINTS         5
877      #define NUM_USB_BUFFERS	14
878      #define NUM_INTERFACE		4
879      #define SEREMU_INTERFACE      1	// Serial emulation
880      #define SEREMU_TX_ENDPOINT    1
881      #define SEREMU_TX_SIZE        64
882      #define SEREMU_TX_INTERVAL    1
883      #define SEREMU_RX_ENDPOINT    2
884      #define SEREMU_RX_SIZE        32
885      #define SEREMU_RX_INTERVAL    2
886      #define KEYBOARD_INTERFACE    0	// Keyboard
887      #define KEYBOARD_ENDPOINT     3
888      #define KEYBOARD_SIZE         8
889      #define KEYBOARD_INTERVAL     1
890      #define KEYMEDIA_INTERFACE    2	// Keyboard Media Keys
891      #define KEYMEDIA_ENDPOINT     4
892      #define KEYMEDIA_SIZE         8
893      #define KEYMEDIA_INTERVAL     4
894      #define NKRO_INTERFACE        3	// NKRO Keyboard
895      #define NKRO_ENDPOINT         5
896      #define NKRO_SIZE             32
897      #define NKRO_REPORT_KEYS		( NKRO_SIZE - 1 )
898      #define NKRO_INTERVAL         1
899      #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
900      #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
901      #define ENDPOINT3_CONFIG	ENDPOINT_TRANSMIT_ONLY
902      #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
903      #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
904      #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ONLY
905
906    #elif defined(USB_SERIAL_NKRO)
907      #define VENDOR_ID		0x16C0
908      #define PRODUCT_ID		0x0487
909      #define DEVICE_CLASS		0xEF
910      #define DEVICE_SUBCLASS	0x02
911      #define DEVICE_PROTOCOL	0x01
912      #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
913      #define MANUFACTURER_NAME_LEN	11
914      #define PRODUCT_NAME		{'S','e','r','i','a','l','/','N','K','R','O',' ','K','e','y','b','o','a','r','d'}
915      #define PRODUCT_NAME_LEN	20
916      #define EP0_SIZE		64
917      #define NUM_ENDPOINTS         6
918      #define NUM_USB_BUFFERS	14
919      #define NUM_INTERFACE		5
920      #define CDC_IAD_DESCRIPTOR	1
921      #define CDC_STATUS_INTERFACE	0
922      #define CDC_DATA_INTERFACE	1	// Serial
923      #define CDC_ACM_ENDPOINT	2
924      #define CDC_RX_ENDPOINT       3
925      #define CDC_TX_ENDPOINT       4
926      #define CDC_ACM_SIZE          16
927      #define CDC_RX_SIZE           64
928      #define CDC_TX_SIZE           64
929      #define KEYBOARD_INTERFACE    2	// Keyboard
930      #define KEYBOARD_ENDPOINT     1
931      #define KEYBOARD_SIZE         8
932      #define KEYBOARD_INTERVAL     1
933      #define KEYMEDIA_INTERFACE    3	// Keyboard Media Keys
934      #define KEYMEDIA_ENDPOINT     5
935      #define KEYMEDIA_SIZE         8
936      #define KEYMEDIA_INTERVAL     4
937      #define NKRO_INTERFACE        4	// NKRO Keyboard
938      #define NKRO_ENDPOINT         6
939      #define NKRO_SIZE             32
940      #define NKRO_REPORT_KEYS		( NKRO_SIZE - 1 )
941      #define NKRO_INTERVAL         1
942      #define ENDPOINT1_CONFIG	ENDPOINT_TRANSMIT_ONLY
943      #define ENDPOINT2_CONFIG	ENDPOINT_TRANSMIT_ONLY
944      #define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_ONLY
945      #define ENDPOINT4_CONFIG	ENDPOINT_TRANSMIT_ONLY
946      #define ENDPOINT5_CONFIG	ENDPOINT_TRANSMIT_ONLY
947      #define ENDPOINT6_CONFIG	ENDPOINT_TRANSMIT_ONLY
948    #endif
949    
950    #ifdef USB_DESC_LIST_DEFINE

In arduino\hardware\teensy\avr\cores\teensy3\usb_desc.c add lines 239-265

236    };
237    #endif
238    
239    #ifdef NKRO_INTERFACE
240    // Via https://dawnmist.dreamwidth.org/1250.html
241    static uint8_t nkro_hid_report_desc[] = {
242            0x05, 0x01, // Usage Page (Generic Desktop),
243            0x09, 0x06, // Usage (Keyboard),
244            0xA1, 0x01, // Collection (Application),
245            // bitmap of modifiers
246            0x75, 0x01, // Report Size (1),
247            0x95, 0x08, // Report Count (8),
248            0x05, 0x07, // Usage Page (Key Codes),
249            0x19, 0xE0, // Usage Minimum (224),
250            0x29, 0xE7, // Usage Maximum (231),
251            0x15, 0x00, // Logical Minimum (0),
252            0x25, 0x01, // Logical Maximum (1),
253            0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
254            // bitmap of keys
255            0x95, NKRO_REPORT_KEYS*8, // Report Count (),
256            0x75, 0x01, // Report Size (1),
257            0x15, 0x00, // Logical Minimum (0),
258            0x25, 0x01, // Logical Maximum(1),
259            0x05, 0x07, // Usage Page (Key Codes),
260            0x19, 0x00, // Usage Minimum (0),
261            0x29, NKRO_REPORT_KEYS*8-1, // Usage Maximum (),
262            0x81, 0x02, // Input (Data, Variable, Absolute),
263            0xc0 // End Collection
264    };
265    #endif
266    
267    #ifdef JOYSTICK_INTERFACE
268    #if JOYSTICK_SIZE == 12

In arduino\hardware\teensy\avr\cores\teensy3\usb_desc.c add lines 603-610 and modify line 612

600    #define MULTITOUCH_INTERFACE_DESC_SIZE	0
601    #endif
602    
603    // Via https://dawnmist.dreamwidth.org/1250.html
604    #define NKRO_INTERFACE_DESC_POS	MULTITOUCH_INTERFACE_DESC_POS+MULTITOUCH_INTERFACE_DESC_SIZE
605    #ifdef  NKRO_INTERFACE
606    #define NKRO_INTERFACE_DESC_SIZE	9+9+7
607    #define NKRO_HID_DESC_OFFSET	NKRO_INTERFACE_DESC_POS+9
608    #else
609    #define NKRO_INTERFACE_DESC_SIZE	0
610    #endif
611    
612    #define CONFIG_DESC_SIZE		NKRO_INTERFACE_DESC_POS+NKRO_INTERFACE_DESC_SIZE
613    
614    
615    
616    // **************************************************************

In arduino\hardware\teensy\avr\cores\teensy3\usb_desc.c add lines 1131-1158

1129   #endif // JOYSTICK_INTERFACE
1130   
1131   #ifdef NKRO_INTERFACE
1132           // interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
1133           9,                                      // bLength
1134           4,                                      // bDescriptorType
1135           NKRO_INTERFACE,                         // bInterfaceNumber
1136           0,                                      // bAlternateSetting
1137           1,                                      // bNumEndpoints
1138           0x03,                                   // bInterfaceClass (0x03 = HID)
1139           0x00,                                   // bInterfaceSubClass (0x01 = Boot)
1140           0x00,                                   // bInterfaceProtocol (0x01 = Keyboard)
1141           0,                                      // iInterface
1142           // HID interface descriptor, HID 1.11 spec, section 6.2.1
1143           9,                                      // bLength
1144           0x21,                                   // bDescriptorType
1145           0x11, 0x01,                             // bcdHID
1146           0,                                      // bCountryCode
1147           1,                                      // bNumDescriptors
1148           0x22,                                   // bDescriptorType
1149           LSB(sizeof(nkro_hid_report_desc)),      // wDescriptorLength
1150           MSB(sizeof(nkro_hid_report_desc)),
1151           // endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
1152           7,                                      // bLength
1153           5,                                      // bDescriptorType
1154           NKRO_ENDPOINT | 0x80,                   // bEndpointAddress
1155           0x03,                                   // bmAttributes (0x03=intr)
1156           NKRO_SIZE, 0,                           // wMaxPacketSize
1157           NKRO_INTERVAL,                          // bInterval
1158   #endif // NKRO_INTERFACE
1159   
1160   #ifdef MTP_INTERFACE

In arduino\hardware\teensy\avr\cores\teensy3\usb_desc.c add lines 1602-1605

1600           {0x2100, MULTITOUCH_INTERFACE, config_descriptor+MULTITOUCH_HID_DESC_OFFSET, 9},
1601   #endif
1602   #ifdef NKRO_INTERFACE
1603           {0x2200, NKRO_INTERFACE, nkro_hid_report_desc, sizeof(nkro_hid_report_desc)},
1604           {0x2100, NKRO_INTERFACE, config_descriptor+NKRO_HID_DESC_OFFSET, 9},
1605   #endif
1606   #ifdef MTP_INTERFACE

In arduino\hardware\teensy\avr\boards.txt add lines 1175-1177

1174    teensyLC.menu.usb.flightsim.fake_serial=teensy_gateway
1175    teensyLC.menu.usb.nkrokeyboard=NKRO Keyboard
1176    teensyLC.menu.usb.nkrokeyboard.build.usbtype=USB_NKRO
1177    teensyLC.menu.usb.nkrokeyboard.fake_serial=teensy_gateway
1178    teensyLC.menu.usb.disable=No USB

Configuring the Firmware and IDE

There are a number of options built into the firmware to give you flexibility in your implementation. These are presented as preprocessor defines that can be commented and uncommented to fit.

All user-editable defines are in Config.h, see the comments for additional information.

If you are not using either the Pro Micro or Teensy LC boards provided in this repo, it may be necessary to change the definitions of the pins, located in PinConfig.h.

If you do not have the FastLED and HID-Project libraries installed, do so though the Tools->Manage Libraries menu.

Compiling

When using a Pro Micro, select Arduino/Genuino Micro from Tools->Board.

When using a Teensy LC, select Teensy LC from Tools->Board, then select NKRO Keyboard from Tools->USB Type for reactive lights. If you are using serial light updates, select Serial + NKRO Keyboard.

Prior to compilation, review the (numerous) options available to the end user in Config.h. Comment and uncomment the corresponding options that match your setup.

Running the Software

Configuring

To be revised.

Power On

To be revised.

Output

By default, the program will run in NKRO Keyboard mode. The specific keyboard keys are set in USBOutput.cpp, but are listed here in order of left to right:

a z s x d c f v g b h n j m k ,

When a second finger touches the pad, the following keys are pressed in order of left to right

1 q 2 w 3 e 4 r 5 t 6 y 7 u 8 i

By default, the air sensor functions as follows:

  • Home is held as long as any sensor is triggered and released when there are no sensors triggered.
  • End is pressed when any motion is detected, as long as the hand was previously in front of the sensors.
  • Page Up is pressed and released when the sensor detections movement upwards.
  • Page Down is pressed and released when the sensor detections movement downwards.

If #define IR_SENSOR_KEY is uncommented, each air sensor will report back individually. The default binding from bottom to top is:

/ . ' ; ] [

Per US QWERTY layout.

About

Open-Source hardware Seaurchin/Qnithm/Laverita controller

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published