Running the AdaFruit example program with a monochrome 128x64 OLED Display
Here's a quick video of the circuit in action:
This is just a quick test of a monochrome 128x64 OLED Display using the Adafruit_SSD1306 library. It runs the 128x64 SPI example from AdaFruit.
I'm using an Arduino Pro Mini running on 3.3V at 8MHz, and driving the OLED directly.
The OLED is one I got from aliexpress for USD3.93 - see the seller's page: Yellow+Blue 0.96" SPI Serial 128X64 OLED. Although it's a monochrome display, this unit comes with two-tinted glass, which makes the upper fifth of the screen yellow and the lower blue.
The pin breakouts are slightly different from the AdaFruit module (used in the Fritzing diagram). These are the actual pin connections for my unit:
| Arduino | OLED |
|---|---|
| D09 | MOSI |
| D10 | CLK |
| D11 | D/C |
| D12 | CS |
| GND | GND |
| VCC | VCC |
Well, that works fine. But it does use a huge amount of the memory just to do this much:
- 20,770 bytes (67%) of program storage space
- 1,580 bytes (77%) of dynamic memory
- AdaFruit's excellent Monochrome OLED Breakouts page
- SSD1306 datasheet
- Requires the Adafruit_SSD1306 library
- Requires the Adafruit-GFX-Library library
- Arduino And SSD1306 Oled Display Tutorial