ZuluSCSI firmware version 1.1.0

What's Changed

• Removed Apple quirks from defaulting to right-aligned strings by @morio in #78
• Akai S1000/3000 read delay in SCSI-1 mode by @PetteriAimonen in #84
• Limit drive capacity to actual file size (#80) by @PetteriAimonen in #83
• Initiator compatibility fixes (RP2040 specific) by @PetteriAimonen in #79

Full Changelog: v1.0.9...v1.1.0

Previous changes in v1.0.9:

• Full support for new ZuluSCSI hardware platform based on Raspberry Pi foundation's RP2040 microcontroller.
• RP2040 bugfixes by @PetteriAimonen in #70
• RP2040 SCSI initiator mode support by @PetteriAimonen in #75
• RP2040: reduce boot delay by enabling cache during bootloader. by @PetteriAimonen in #69
  IMPORTANT:

For boards marked:

• "ZuluSCSI V1.1", you must download and place ZuluSCSIv1_1_.bin on your SD card.
• "ZuluSCSI V1.0", you must download and place ZuluSCSIv1_0_.bin on your SD card.
  The BLUE ZuluSCSI Mini (DB25 version, blue printed circuit board) is revision V1.0 hardware
• "ZuluSCSI RP2040" (Red boards), you must download and place ZuluSCSI_RP2040.bin on your SD card.
  The RED ZuluSCSI Mini (DB25 version, red printed circuit board) is RP2040 platform

Accidentally applying the incorrect firmware will result in your ZuluSCSI being unable to read SD cards after the firmware flash completes (five LED blinks), which will then require you to re-flash the correct firmware via USB, using DFU.