- Reading of the touch sensor
- Integration via both ESP Home Native API & MQTT
- Additional MQTT topic for setting the brightness without changing the state of the light
- White LED turns on when the light is on
- Green LED flashes when first powered until wifi connects
- Update devices/secrets.yaml
- Update example_sw2.yaml with the id and friendly name for your switch. The id will be used as the hostname and id in Home Assistant.
- Rename example_sw2.yaml
- Consider disabling the web interface in devices/gosund_sw2_light.yaml
- Compile with esphome
- Flash
The MQTT implementation uses the ESP Home's pattern for auto discovery. The topics for status and control of the light will be under
{app}/light/{id}. Where {app} is the name of the yaml file without the extension, and {id} is the device_id inside the yaml file.
StateTopic: {app}/light/{id}/state
- Payload is json formatted:
{"state":"ON","brightness":255}
Command Topic: {app}/light/{id}/command
- Same JSON formatting as the state topic
- state is required and is either ON or OFF
- brightness is optional with a range of 0-255
Brightness Command Topic: {app}/light/id/command/brightness_pct
- Changes the brightness without changing the state of the light
- Payload is an integer in the range of 1-100