Fledex

Fledex is a small Elixir library It really is intended for educational purposes. It is written for a RaspberryPi Zero W running Nerves especially with a Nerves-Livebook. The intent of the library is to simplify the programming of a programmable LED strip (currently based on a WS2801 chip) and thereby to make it accessible even for kids.

The idea is to introduce similarly easy concepts for the programming of LEDs as SonicPi did for music. The library was developped in collaboration with my son and hopefully we can push it to become better over time. For my son the goal will be to connect the LEDs to some music and to animate the LEDs depending on the beat.

Quite a lot of inspiration came from the FastLED project and quite a few of their functions got reimplemented in Elixir. If you look at the implementation of some of those functions you might want to look at their comments.

Installation

The library is available in Hex, the package can be installed by adding :fledex to your list of dependencies in mix.exs:

def deps do
  [
    {:fledex, "~> 0.3.0"}
  ]
end

Once in you have installed the library and run your usual mix deps.get you can start the LedDriver Server by calling:

config = %{
  # here comes your configuration
}
{:ok, pid} = LedStrip.start_link(config)

The Fledex.LedStrip should have quite reasonable defaults to get you started (a Fledex.Driver.Impl.Null driver is used by default)

Your interaction with the LedDriver should mainly happen through the Leds module. To set the first 3 LEDs (of a 50 LED strip) to red, green and blue you would do the following (here the color names are used, but you could have used the hex values 0xFF0000, 0x00FF00, and 0x0000FF too):

LedStrip.define_namespace(:default)
Leds.leds(50)
  |> Leds.light(:red)
  |> Leds.light(:green1) 
  |> Leds.light(:blue)
  |> Leds.send() # :default namespace is used as default

All other LEDs would be set to off

The above approach is rather cumbersome with a lot of LEDs, and would be even more difficult if you want to animate it. Thus, instead of managing the LED strip yourself, you should use the Fledex DSL.

Take a look at the Livebook examples on how to use the DSL

Livebook

You can find some livebooks files that show you how to use the library in a notebook (with and without hardware). You should be able to do most of your development on a computer (emulating the LED strip with a Fledex.Driver.Impl.Kino) before adjusting it to the real hardware (with the Fledex.Driver.Impl.Spi). On real hardware you can even run it with serveral drivers at the same time.

Further Docs

you can find some further documentation in the docs folder about:

• An Overview over the Architecture
• How to setup and connect real Hardware
• You might find in the folder also some temporary documenation with some thoughts, but I delete them again, once they have fulfilled their purpose, except for:
• A bit of history with the Project Plan as created with my son

Known Limitations

If you want to run this library in nerves-livebook, you currently have to compile your own livebook with the library included in your mix.exs file, since you can't add any libraries that are not already bundled.

Contributing

Contributions of any kind are very much welcome

• raising issues,
• raising PR (see also this doc),
• reporting security vulnerabilities (see also this doc),
• suggesting improvements to documentation incl. reporting typos,
• raising feature requests,
• ...

Before doing so please make sure to also read through the CONTRIBUTING document and ensure to follow the Code of Conduct.

If you need any assistance, feel free to send an email to fledex at reik.org