#R-360-3D-Printer

First open source polar RepRap 3d printer

##Documentation

You can find more information and tutorials on the following links: Reprap Wiki replicatorwarehouse.com

##BOM

###Plastic Parts

Quantity	Description
1x	Centring Tool
1x	Extruder Holder
1x	Extruder Holder Extension(Dual head only)
1x	Extruder inlet(one is enough, but we recomend to have 3)
1x	Extruder large gear
1x	Extruder small gear
3x	Leveler
1x	X-carrige
1x	X-end
1x	X motor holder
1x	Y-axes large gear
1x	Y-axes small gear
1x	Y-axes support cap
1x	Y base
1x	Y idler
1x	Z-axes base
1x	Z-end top
1x	Z endstop holder
1x	Ramps box Bottom (optional)
1x	Ramps box Top (optional)
1x	LCD box back (optional)
1x	LCD box front (optional)

###Laser Cut Parts

Quantity	Description
1x	disc_full-low
1x	dixc_full-top

###Vitamins

This section is not complet yet, It will be finalised throgh the next few days! We use allen bolts as as standard. We marked the other types when it is diviates (like Hex Head).

####Rods

Quantity	Description
1x	200mm M8 threaded rod
1x	250mm M8 threaded rod
1x	280mm M5 threaded rod
2x	320mm M8 smooth rod
2x	380mm M10 smooth rod

####Bolts and Nuts And Springs

Quantity	Description
8x	M8 Nut
8x	M8 Washer Shakeproof
5x	M8 Washer
1x	M8 Nylock Nut
1x	M8 70mm Hex head Bolt
21x	M3 10mm Bolt
15x	M3 Nuts
4x	M3 Nylock Nuts
18x	M3 Washer
-x	M3 12mm bolt
-x	M3 16mm Bolt
-x	M3 20mm Bolt
-x	M3 30mm Bolt
-x	M3 50mm Hex head Bolt
1x	M5 Nut

#####Extruder Bolts and Nuts

Quantity	Description
1x	M8 Nylock Nut (extruder)
1x	M8 Hobbed Bolt (extruder)
2x	M8 Penny washers (extruder)
4x	M8 Washers (extruder)
2x	M4 50mm Bolt (extruder)
2x	M4 Nut (extruder)
2x	M4 Washer (extruder)
1x	M3 25mm Bolt (extruder)

####Springs

Quantity	Description
4x	Bed Springs lenght: 13mm inner diameter: 3.15mm
1x	Extruder Spring (per extruder) lenght: 15mm inner diameter: 4.2mm

####Bearings

Quantity	Description
3x	608zz
3x	623zz
4x	LM8UU
4x	LM10UU

####Electronics

Quantity	Description
1x	Ramps 1.4
1x	Arduino Mega 2560
4x	Polulu A4988 (5 for dual setup)
2x	Mechanical Endstops
1x	LCD Screen (optional but strongly recomended)
1x	Power Supply 12V 5A with 2.5mm round plug and local socket power cable
1x	2.5mm solderless socket
1x	USB Cable
2x	3 wire endstop cable
4x	4 wire Motor cables
1x	2 wire Heater cartridge (per extruder)
1x	2 wire Fan (per extruder)
1x	2 wire Thermostate Cable (per extruder)
1x	2 wire Electronins Cooling Fan

####Motors

Quantity	Description
4x	Nema 17 (4.4kg torque) shaft flatened on one side (~1mm)

####Extruder

ActiveX or ActiveX Dual extruder

####Other

Quantity	Description
20x	Zip ties
1m	Cable organiser 1cm diameter
200mm	Cable organiser 2cm diameter
450mm	GT2 belt
1x	GT2 pulley for 5mm shaft
1x	5mm to 5mm flexible coupling
	3M blue masking tape
400mm	Heatshrink inner diameter: 2.5mm
1x	12V Power Switch

##Developers

Kornel Farkas

Email: admin@replicatorwarehouse.com

Website: Replicatorwarehouse.com

##Licences

####R-360 Printer

R-360 is licenced under CC-BY-SA

####Greg's Wade Licence

The included and modified extruder parts are based on Gregs Wade extruder. Greg's Wade Extruder is licensed under the Creative Commons - GNU GPL license. 2010 by GregFrost Extruder based on prusa git repo. http://www.thingiverse.com/thing:6713

####R-360 Logo

The R-360 logo is not included! Can I have your cool logo on my printer? :) R-360 Logo contains our company logo which is trade marked so please do not use unauthorised. However the logo is not required for the functionality of the printer, but it makes it look much cooler! ;) If you like to have the full experience and you would like to have our official logo on your printer :) and you would like to support us to continue to develop the R-360 printer, then please donate 5 USD to us and we will allow you to print and use our logo on your printer. :) Drop us an email to admin@replicatorwarehouse.com