HPF - DT High Performance File Format high speed decoding library (for Modula-2 programming language)
The current version of
m2hpf supports only reading *.hpf files. So
m2hpf can't be used to write files in HPF format.
This implementation is based on the DT HPF file format, which is described in a document I found some where on the internet entitled DT High Performance File Format Specification
DT High Performance File Format Specification _______________________________ Document Number: 22760, Rev A Copyright © 2007 Data Translation, Inc. All rights reserved. _______________________________ Data Translation, Inc. 100 Locke Drive Marlborough, MA 01752-1192, USA Telephone (508) 481-3700 Home Page http://www.datatranslation.com/
m2hpf library implements a slightly modified version of the format described in the document above,
it has beed written to support the actual format of Delsys EMGworks signals.
This library is made to provide quick data access, to be used in real-time signal processing project, so for example; using this library to implement a HPF to CSV file converter will be much more efficient than using the Delsys File Utility.
The library has been written in Modula2 programming language for an internal use. Now it is published under LGPL-3.0.
THIS LIBRARY IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND.
IF YOU WANT USE THIS LIBRARY IN TOUR PROJECT, YOU MAY NEED TO READ THE FILE FORMAT SPECS DOCUMENT, SPECIALLY THE STATEMENT ON PAGE 1:
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Data Translation, Inc.
Abdelhak Bougouffa 2019