simple, hp friendly VCV rack modules. download adsynth-VCV.zip and extract to VCV plugin lbrary
note: all plugins work in VCV 1.1.4++ environment, but are NOT suitable for VCV2.0 operation.
treshold parameter sets the critical value for logic gates (0 - 10 V)
and, nand, or, nor max/min - outputs respective voltage - suitable for audio/cv signals
8-step sequencer equipped with three CV-switchable modes of operation: up, down, pendulum (up-down)
inputs:
clk - clock/trigger input
rst - reset sequence
run - when trigger is received, the sequence starts running
mode - sets running mode by incoming CV signal
clk - passes on internal or external clock
eoc - sends trigger when cycle finishes, useful in creating longer than 8-step sequences with multiple instances of plugin
CV - sequence CV output
gate - gate output
slim audio oscillator with hard sync and four simultaneous output waves: sine, triangle, pulse, sawtooth
fine, semi, coarse - tuning kobs, respectively: +/-1 semitone, +/-1 octave, +/-10 octaves.
pwm - sets pulse width modulation for pulse wave
pitch - additional linear FM CV input
hp friendly low frequency oscillator with four simultaneous output waves: sine, triangle, pulse, sawtooth
pw - sets pulse width for pulse wave
polar - switches range from 0V - 10V to -5V - 5V
simple hp friendly ADSR envelope generator.
exp/lin/log curves included.
dual audio & CV multiples
one input, eight outputs signal multiples
hp friendly signal merger, with two operating modes:
sum - adds the signals
avg - adds signals then divises the signal with value of used inputs
4xVCA in minimal hp environment
quad voltage controlled attenuator
both channels are controlled by single CV signal
linear voltage controlled attenuator times five.
less cramped layout than uPots.
simple DC offset, range -10V - 10V
clock divider