Skip to content
This is a *simple* BLE broadcast based sensor net. It is not secure at all.
Python
Branch: master
Clone or download

README.rst

Introduction

Documentation Status Discord Build Status

Basic IOT over BLE advertisements.

Dependencies

This driver depends on:

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

Note

Only the bridge examples work on Raspberry Pi because Blinka _bleio doesn't support advertising, only scanning.

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-ble-broadcastnet

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-ble-broadcastnet

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-ble-broadcastnet

Usage Example

Add a secrets.py file and then run ble_broadcastnet_blinka_bridge.py.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.

You can’t perform that action at this time.