Merge pull request #747 from neotje/master

nrfx_temp implemented

cores/nRF5/nordic/nrfx/drivers/src/nrfx_temp.c

@@ -0,0 +1,146 @@
+/*
+ * Copyright (c) 2019 - 2020, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice, this
+ *    list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its
+ *    contributors may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <nrfx.h>
+
+#if NRFX_CHECK(NRFX_TEMP_ENABLED)
+
+#include <nrfx_temp.h>
+
+#if !defined(USE_WORKAROUND_FOR_TEMP_OFFSET_ANOMALY) && defined(NRF51)
+// Enable workaround for nRF51 series anomaly 28
+// (TEMP: Temperature offset value has to be manually loaded to the TEMP module).
+#define USE_WORKAROUND_FOR_TEMP_OFFSET_ANOMALY 1
+#endif
+
+/** @brief Time of one check attempt.*/
+#define NRFX_TEMP_TIME_US 4
+
+/** @brief Maximum attempts to check whether conversion passed.*/
+#define NRFX_TEMP_ATTEMPTS 10
+
+/** @brief Internal state of TEMP driver. */
+static nrfx_drv_state_t m_temp_state;
+
+/** @brief Pointer to handler to be called from interrupt routine. */
+static nrfx_temp_data_handler_t m_data_handler;
+
+nrfx_err_t nrfx_temp_init(nrfx_temp_config_t const * p_config, nrfx_temp_data_handler_t handler)
+{
+    NRFX_ASSERT(p_config);
+
+    if (m_temp_state != NRFX_DRV_STATE_UNINITIALIZED)
+    {
+        return NRFX_ERROR_ALREADY_INITIALIZED;
+    }
+
+#if NRFX_CHECK(USE_WORKAROUND_FOR_TEMP_OFFSET_ANOMALY)
+    *(uint32_t volatile *)0x4000C504 = 0;
+#endif
+
+    m_data_handler = handler;
+
+    if (m_data_handler)
+    {
+        nrf_temp_int_enable(NRF_TEMP, NRF_TEMP_INT_DATARDY_MASK);
+        NRFX_IRQ_PRIORITY_SET(TEMP_IRQn, p_config->interrupt_priority);
+        NRFX_IRQ_ENABLE(TEMP_IRQn);
+    }
+
+    m_temp_state = NRFX_DRV_STATE_INITIALIZED;
+    return NRFX_SUCCESS;
+}
+
+void nrfx_temp_uninit(void)
+{
+    NRFX_ASSERT(m_temp_state == NRFX_DRV_STATE_INITIALIZED);
+    nrf_temp_task_trigger(NRF_TEMP, NRF_TEMP_TASK_STOP);
+
+    if (m_data_handler)
+    {
+        nrf_temp_int_disable(NRF_TEMP, NRF_TEMP_INT_DATARDY_MASK);
+        NRFX_IRQ_DISABLE(TEMP_IRQn);
+    }
+
+    m_temp_state = NRFX_DRV_STATE_UNINITIALIZED;
+}
+
+int32_t nrfx_temp_calculate(int32_t raw_measurement)
+{
+    /* Raw temperature is a 2's complement signed value. Moreover, it is represented
+     * by 0.25[C] intervals, so division by 4 is needed. To preserve
+     * fractional part, raw value is multiplied by 100 before division.*/
+
+    return (raw_measurement * 100) / 4;
+}
+
+nrfx_err_t nrfx_temp_measure(void)
+{
+    NRFX_ASSERT(m_temp_state == NRFX_DRV_STATE_INITIALIZED);
+
+    nrfx_err_t result = NRFX_SUCCESS;
+    nrf_temp_event_clear(NRF_TEMP, NRF_TEMP_EVENT_DATARDY);
+    nrf_temp_task_trigger(NRF_TEMP, NRF_TEMP_TASK_START);
+
+    if (!m_data_handler)
+    {
+        bool ev_result;
+        NRFX_WAIT_FOR(nrf_temp_event_check(NRF_TEMP, NRF_TEMP_EVENT_DATARDY),
+                      NRFX_TEMP_ATTEMPTS,
+                      NRFX_TEMP_TIME_US,
+                      ev_result);
+        if (!ev_result)
+        {
+            result = NRFX_ERROR_INTERNAL;
+        }
+        else
+        {
+            nrf_temp_event_clear(NRF_TEMP, NRF_TEMP_EVENT_DATARDY);
+        }
+        nrf_temp_task_trigger(NRF_TEMP, NRF_TEMP_TASK_STOP);
+    }
+
+    return result;
+}
+
+void nrfx_temp_irq_handler(void)
+{
+    NRFX_ASSERT(m_data_handler);
+
+    nrf_temp_task_trigger(NRF_TEMP, NRF_TEMP_TASK_STOP);
+    nrf_temp_event_clear(NRF_TEMP, NRF_TEMP_EVENT_DATARDY);
+
+    uint32_t raw_temp = nrfx_temp_result_get();
+
+    m_data_handler(raw_temp);
+}
+
+#endif // NRFX_CHECK(NRFX_TEMP_ENABLED)

cores/nRF5/nordic/nrfx_config.h

@@ -45,5 +45,8 @@
   #define NRFX_SPIM3_ENABLED  0
 #endif
 
+// NRFX temp
+#define NRFX_TEMP_ENABLED 1
+#define NRFX_TEMP_DEFAULT_CONFIG_IRQ_PRIORITY 7
 
 #endif // NRFX_CONFIG_H__

libraries/Bluefruit52Lib/examples/Hardware/temp_measure_blocking/temp_measure_blocking.ino

@@ -0,0 +1,25 @@
+/*
+ This is example usage of the nrfx_temp driver
+*/
+
+#include <nrfx_temp.h>
+#include <Adafruit_TinyUSB.h> 
+
+nrfx_temp_config_t config = NRFX_TEMP_DEFAULT_CONFIG;
+
+void setup() {
+  Serial.begin(9600);
+  // setting the handler to NULL will initialize the driver in blocking mode
+  nrfx_temp_init(&config, NULL);
+}
+
+void loop() {
+  nrfx_temp_measure(); // In blocking mode: this function waits until the measurement is finished.
+  int32_t raw_temp = nrfx_temp_result_get();
+  float temp_c = raw_temp / 4.0;
+
+  Serial.print(temp_c);
+  Serial.println(" C");
+
+  delay(1000);
+}

libraries/Bluefruit52Lib/examples/Hardware/temp_measure_non_blocking/temp_measure_non_blocking.ino

@@ -0,0 +1,26 @@
+/*
+ This is example usage of the nrfx_temp driver
+*/
+
+#include <nrfx_temp.h>
+#include <Adafruit_TinyUSB.h> 
+
+nrfx_temp_config_t config = NRFX_TEMP_DEFAULT_CONFIG;
+
+// this function is called when the temperature measurement is ready
+void temp_handler(int32_t raw_temp) {
+  float temp_c = raw_temp / 4.0;
+  Serial.print(temp_c);
+  Serial.println(" C");
+}
+
+void setup() {
+  Serial.begin(9600);
+  nrfx_temp_init(&config, &temp_handler);
+}
+
+void loop() {
+  nrfx_temp_measure();
+
+  delay(1000);
+}