Create 1.0.6 release

shortlog of release 1.0.6:

Drew Fustini (39):
      Add -Wno-unit_address_vs_reg to avoid dtc warning
      check if board is BeagleBone Blue or PocketBeagle
      check if BeagleBone Blue before accessing non-standard LEDs
      Add test for GPIO regression #178
      change syslog mask level to DEBUG
      add "Adafruit_BBIO" to syslog()
      update test for issue #178
      remove polarity "hack" for PWM #170
      move pwm_set_polarity() after period is set
      add test for issue #170
      only check kernel overlays if u-boot overlays are not being used
      Attempt to use udev ecap path for pwm path
      add test script for all BeagleBone PWM outputs
      update PWM test for 4.14 kernel udev paths
      minor change to pwm debug logging
      sleep to avoid udev race condition #185

Mark A. Yoder (1):
      Added BAT25, BAT50, BAT75, BAT100 and WIFI LEDs

Peter Lawler (1):
      Missing CR/LF

Robert Nelson (10):
      source/common.c: add initial PocketBeagle values
      source/common.c: PocketBeagle, no slots file, everything built-in
      source/common.c: PocketBeagle, no slots file disable here too
      source/c_pwm.c: HACK: U-Boot pre-setup everything, dont search for specific overlay
      source/c_pwm.c: HACK: PocketBeagle: v4.14.x
      source/c_pwm.c: debug pwm_path/pwm_path_udev
      source/c_pwm.c: pwm: add support for pwmchipX/pwm-X:Y syntax
      source/c_pwm.c: disable pwm_set_polarity (broken in v4.9.x/v4.14.x)
      source/common.c: Blue Fix GP0_3 id
      source/common.c: PocketBeagle Fix P2.24

CHANGELOG.md

@@ -1,3 +1,41 @@
+1.0.6
+----
+* Drew Fustini (39):
+  * Add -Wno-unit_address_vs_reg to avoid dtc warning
+  * check if board is BeagleBone Blue or PocketBeagle
+  * check if BeagleBone Blue before accessing non-standard LEDs
+  * Add test for GPIO regression #178
+  * change syslog mask level to DEBUG
+  * add "Adafruit_BBIO" to syslog()
+  * update test for issue #178
+  * remove polarity "hack" for PWM #170
+  * move pwm_set_polarity() after period is set
+  * add test for issue #170
+  * only check kernel overlays if u-boot overlays are not being used
+  * Attempt to use udev ecap path for pwm path
+  * add test script for all BeagleBone PWM outputs
+  * update PWM test for 4.14 kernel udev paths
+    * * minor change to pwm debug logging
+  * sleep to avoid udev race condition #185
+
+* Mark A. Yoder (1):
+  * Added BAT25, BAT50, BAT75, BAT100 and WIFI LEDs
+
+* Peter Lawler (1):
+  * Missing CR/LF
+
+* Robert Nelson (10):
+  * source/common.c: add initial PocketBeagle values
+  * source/common.c: PocketBeagle, no slots file, everything built-in
+  * source/common.c: PocketBeagle, no slots file disable here too
+  * source/c_pwm.c: HACK: U-Boot pre-setup everything, dont search for specific overlay
+  * source/c_pwm.c: HACK: PocketBeagle: v4.14.x
+  * source/c_pwm.c: debug pwm_path/pwm_path_udev
+  * source/c_pwm.c: pwm: add support for pwmchipX/pwm-X:Y syntax
+  * source/c_pwm.c: disable pwm_set_polarity (broken in v4.9.x/v4.14.x)
+  * source/common.c: Blue Fix GP0_3 id
+  * source/common.c: PocketBeagle Fix P2.24
+
 1.0.5
 ----
 * @pdp7 (5):

setup.py

@@ -40,7 +40,7 @@
 }
 
 setup(name             = 'Adafruit_BBIO',
-      version          = '1.0.5',
+      version          = '1.0.6',
       author           = 'Justin Cooper',
       author_email     = 'justin@adafruit.com',
       description      = 'A module to control BeagleBone IO channels',