Espressif ESP32-S3 DevKitC-1-N32R8

ports/espressif/boards/espressif_esp32s3_devkitc_1_n32r8/board.c

@@ -0,0 +1,48 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+#include "mpconfigboard.h"
+#include "shared-bindings/microcontroller/Pin.h"
+
+void board_init(void) {
+    // Debug UART
+    #ifdef DEBUG
+    common_hal_never_reset_pin(&pin_GPIO43);
+    common_hal_never_reset_pin(&pin_GPIO44);
+    #endif
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+
+}
+
+void board_deinit(void) {
+}

ports/espressif/boards/espressif_esp32s3_devkitc_1_n32r8/mpconfigboard.h

@@ -0,0 +1,39 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "ESP32-S3-DevKitC-1-N32R8"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL         (&pin_GPIO48)
+
+#define CIRCUITPY_BOOT_BUTTON       (&pin_GPIO0)
+
+#define DEFAULT_UART_BUS_RX         (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX         (&pin_GPIO43)
+
+#define AUTORESET_DELAY_MS          500

ports/espressif/boards/espressif_esp32s3_devkitc_1_n32r8/mpconfigboard.mk

@@ -0,0 +1,10 @@
+USB_VID = 0x303A
+USB_PID = 0x7003
+USB_PRODUCT = "ESP32-S3-DevKitC-1-N32R8"
+USB_MANUFACTURER = "Espressif"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE=dout
+CIRCUITPY_ESP_FLASH_FREQ=80m
+CIRCUITPY_ESP_FLASH_SIZE=32MB

ports/espressif/boards/espressif_esp32s3_devkitc_1_n32r8/pins.c

@@ -0,0 +1,49 @@
+#include "shared-bindings/board/__init__.h"
+
+STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_ROM_QSTR(MP_QSTR_IO0), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_IO1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_IO2), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_IO3), MP_ROM_PTR(&pin_GPIO3) },
+    { MP_ROM_QSTR(MP_QSTR_IO4), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_IO5), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_IO6), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_IO7), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_IO8), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_IO9), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_IO10), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_IO11), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_IO12), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_IO13), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_IO14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_IO15), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_IO16), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_IO17), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_IO18), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_IO19), MP_ROM_PTR(&pin_GPIO19) },
+    { MP_ROM_QSTR(MP_QSTR_IO20), MP_ROM_PTR(&pin_GPIO20) },
+    { MP_ROM_QSTR(MP_QSTR_IO21), MP_ROM_PTR(&pin_GPIO21) },
+    { MP_ROM_QSTR(MP_QSTR_IO35), MP_ROM_PTR(&pin_GPIO35) },
+    { MP_ROM_QSTR(MP_QSTR_IO36), MP_ROM_PTR(&pin_GPIO36) },
+    { MP_ROM_QSTR(MP_QSTR_IO37), MP_ROM_PTR(&pin_GPIO37) },
+    { MP_ROM_QSTR(MP_QSTR_IO38), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_IO39), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_IO40), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_IO41), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_IO42), MP_ROM_PTR(&pin_GPIO42) },
+    { MP_ROM_QSTR(MP_QSTR_IO43), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_IO44), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_IO45), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_IO46), MP_ROM_PTR(&pin_GPIO46) },
+    { MP_ROM_QSTR(MP_QSTR_IO47), MP_ROM_PTR(&pin_GPIO47) },
+    { MP_ROM_QSTR(MP_QSTR_IO48), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/espressif_esp32s3_devkitc_1_n32r8/sdkconfig

@@ -0,0 +1,77 @@
+CONFIG_ESP32S3_SPIRAM_SUPPORT=y
+#
+# SPI RAM config
+#
+# CONFIG_SPIRAM_MODE_QUAD is not set
+CONFIG_SPIRAM_MODE_OCT=y
+# CONFIG_SPIRAM_TYPE_AUTO is not set
+CONFIG_SPIRAM_TYPE_ESPPSRAM64=y
+CONFIG_SPIRAM_SIZE=8388608
+# end of SPI RAM config
+
+CONFIG_DEFAULT_PSRAM_CLK_IO=30
+#
+# PSRAM Clock and CS IO for ESP32S3
+#
+CONFIG_DEFAULT_PSRAM_CS_IO=26
+# end of PSRAM Clock and CS IO for ESP32S3
+
+# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
+# CONFIG_SPIRAM_RODATA is not set
+CONFIG_SPIRAM_SPEED_80M=y
+# CONFIG_SPIRAM_SPEED_40M is not set
+CONFIG_SPIRAM=y
+CONFIG_SPIRAM_BOOT_INIT=y
+# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
+CONFIG_SPIRAM_USE_MEMMAP=y
+# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
+# CONFIG_SPIRAM_USE_MALLOC is not set
+CONFIG_SPIRAM_MEMTEST=y
+
+#
+# Serial flasher config
+#
+CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
+# CONFIG_ESPTOOLPY_NO_STUB is not set
+CONFIG_ESPTOOLPY_OCT_FLASH=y
+CONFIG_ESPTOOLPY_FLASHMODE_OPI=y
+# CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR is not set
+CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_DTR=y
+CONFIG_ESPTOOLPY_FLASHMODE="dout"
+CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
+# CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
+# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
+CONFIG_ESPTOOLPY_FLASHFREQ="80m"
+# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y
+# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE="32MB"
+CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
+CONFIG_ESPTOOLPY_BEFORE_RESET=y
+# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
+CONFIG_ESPTOOLPY_BEFORE="default_reset"
+CONFIG_ESPTOOLPY_AFTER_RESET=y
+# CONFIG_ESPTOOLPY_AFTER_NORESET is not set
+CONFIG_ESPTOOLPY_AFTER="hard_reset"
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set
+CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set
+# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set
+CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
+CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
+# end of Serial flasher config
+
+#
+# LWIP
+#
+CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
+# end of LWIP

ports/espressif/esp-idf-config/partitions-32MB.csv

@@ -0,0 +1,9 @@
+# Name,             Type,   SubType,    Offset,     Size
+# bootloader,       app,    boot,       0x1000/0x0, 28/32K
+# partition_table,  data,   table,      0x8000,     4K
+nvs,                data,   nvs,        0x9000,     20K
+otadata,            data,   ota,        0xe000,     8K
+ota_0,              app,    ota_0,      0x10000,    2048K
+ota_1,              app,    ota_1,      0x210000,   2048K
+uf2,                app,    factory,    0x410000,   256K
+user_fs,            data,   fat,        0x450000,   28352K

ports/espressif/esp-idf-config/sdkconfig-32MB.defaults

@@ -0,0 +1,19 @@
+#
+# Serial flasher config
+#
+# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
+# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y
+CONFIG_ESPTOOLPY_FLASHSIZE="32MB"
+CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y
+# end of Serial flasher config
+
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="esp-idf-config/partitions-32MB.csv"
+#
+# Partition Table
+#
+CONFIG_PARTITION_TABLE_FILENAME="esp-idf-config/partitions-32MB.csv"
+# end of Partition Table

tools/ci_check_duplicate_usb_vid_pid.py

@@ -54,6 +54,7 @@
         "espressif_esp32s3_devkitc_1_n8",
         "espressif_esp32s3_devkitc_1_n8r2",
         "espressif_esp32s3_devkitc_1_n8r8",
+        "espressif_esp32s3_devkitc_1_n32r8",
     ],
     "0x303A:0x7009": [
         "espressif_esp32s2_devkitc_1_n4",