Tellstick Duo gateway to Mqtt, docker build

Concept

This service will work as a gateway between the tellstick duo and a mqtt broker.

The service can:

• Send sensordata from the tellstick to mqtt broker
• Change state (turn on/off) a device on an mqtt trigger

Mqtt structure:

sensordata

sensors/<room>/<sensor type>/<sensor id>/sensors

Example

sensors/living_room/humidity/135/sensors

Trigger message'

devices/tellstick/<room>/<description>

Example

devices/tellstick/bedroom/desk_lamp

Deploy

Building from source

cd <git root>/build
docker build -t adddrian/tellstick .

Run it as a logger (will only print all messages it recivies in the log)

docker run -d --device=/dev/bus/usb --name tellstick adddrian/tellstick
docker build -t adddrian/tellstick build/.
docker logs tellstick

Example log of tellstick:

[SENSOR] 191 [fineoffset/temperature] (1) @ 1491300564 <- 9.6 [RAW] 1 <- class:sensor;protocol:fineoffset;id:183;model:temperaturehumidity;humidity:35;temp:22.9; [RAW] 1 <- class:sensor;protocol:fineoffset;id:135;model:temperaturehumidity;humidity:29;temp:22.6; [RAW] 1 <- class:sensor;protocol:fineoffset;id:136;model:temperature;temp:8.6; [RAW] 1 <- class:sensor;protocol:fineoffset;id:183;model:temperaturehumidity;humidity:35;temp:22.9; [RAW] 1 <- class:sensor;protocol:fineoffset;id:135;model:temperaturehumidity;humidity:29;temp:22.6; [RAW] 1 <- class:sensor;protocol:fineoffset;id:136;model:temperature;temp:8.6;

Run it persistent

docker run -d --device=/dev/bus/usb --name tellstick \
  -v /srv/tellstick/tellstick.conf:/etc/tellstick.conf \
  -v /srv/tellstick/config.yaml:/tellstick/config.yaml \
adddrian/tellstick

Reuse tellstick config

mv /etc/tellstick.conf /srv/tellstick/tellstick.conf

config

Mqtt settings (Required)

mqtt: 
  host: mqtt.example.org
  port: 1883
  authentication:
    username: test
    password: test2

Sensors that trigger a publish to mqtt broker with its sensor value received by the tellstick (Optional)

sensor: 
  - id: 183
    protocol: fineoffset
    model: temperaturehumidity
    dataType: 1
    mqttRoom: bedroom
    mqttSensorType: temperature

  - id: 183
    protocol: fineoffset
    model: temperaturehumidity
    dataType: 2
    mqttRoom: bedroom
    mqttSensorType: humidity

Raw message of devices that should trigger a publish to Mqtt broker with the payload specified (Optional)

raw:
  - tellstickMessage: class:command;protocol:arctech;model:selflearning;house:15139302;unit:10;group:0;method:turnon;
    mqttRoom: hall
    mqttSensorType: motion
    mqttDescription: 15139302
    mqttPayload: 1

Switch mqtt listener with id of tellstick that should be turned ON/OFF (Optional)

switch: 
  - mqttRoom: livingroom
    mqttDescription: tv_lamp
tellstickDeviceId: 2

License

GNU General Public License v3.0