This is an adapted version of drmon written by acidjazz. It has been modified to work with 1.12.2 and has some added features

status: currently in development

drmon

monitor and failsafe automation for your draconic reactor

Bat

Monitor for Draconic Storage

Pocket

Remote access to reactor controls and monitoring

what is this

This is a set of computercraft LUA scripts that monitors everything about a draconic reactors and storage, with a couple features to help keep it from exploding NB: This is for Minecraft 1.12.2. You will need to answer some questions on console during install

tutorial

1.7.10 you can find a very well made youtube tutorial on how to set this up here , thank you The MindCrafters

I have not created a tutorial for 1.12.2 yet.

features

• uses a 3x3 advanced computer touchscreen monitor to interact with your reactor
• automated regulation of the input gate for the targeted field strength of 50%
• immediate shutdown and charge upon your field strength going below 20%
  • reactor will activate upon a successful charge
• immediate shutdown when your temperature goes above 8000C
  • reactor will activate upon temperature cooling down to 3000C
• easily tweak your output flux gate via touchscreen buttons
  • +/-100k, 10k, and 1k increments
• monitor storage cell capacity on 3x3 screen connected the same way as reactor monitoring
• remote monitoring is available via ender modems(optional)
  • Remote monitoring can monitor multiple reactors at once.
  • Allows for remote status, shutdown, startup of reactors and patching

requirements

• one fully setup draconic reactor with fuel
• 1 advanced computer
• 9 advanced monitors
• 4 wired modems, wireless will not work
• a bunch of network cable
• 1 ender modem (Optional)

installation

• One of the reactor stabilizers needs to touch a side of the advanced computer
• The flux gates and monitors need to be connected by modem
• connect a modem to your input flux gate (the one connected to your reactor energy injector)
• Take note of the name when you turn the modem on
• connect a modem to your output flux gate
• connect a modem to your advanced computer
• setup yoru monitors to be a 3x3 and connect a modem to anywhere but the front
• run network cable to all 4 modems
• install this code via running the install script using these commands :

> pastebin get mgF6RZFQ startup
> startup

> On Advanced ender pocket computer (Optional)
> pastebin get PUWxdYWY startup
> startup

• you should see stats in your term, and on your monitor

upgrading to the latest version

• right click your computer
• hold ctrl+t until you get a >

> reboot

known issues

• there is a problem with skyfactory 2.5 and pastebin, see workarounds here