Configures a Raspberry Pi Zero W that can't reach cloudflare DNS to disconnect and broadcast a rescue wifi network.
From a bare Raspbian install:
$ chmod +x ./setup.sh
$ sudo ./setup.sh
If you are intalling to a system already in use, please examine this script carefully before executing, to ensure it will not clobber important settings. Expert users may be able to adapt this project to work on other Debian-like systems. Extreme caution should be taken.
The default rescue network name is "rescue" with a password of "rescueme". Remote access through something like ssh must be separately enabled. Triggering wlanwd sets wlan0's IP address to 192.168.1.2/16.
To exit rescue mode, execute $ sudo systemctl stop wlanwd-ap.service, or reboot the device with a configuration that will allow scripts/test.sh to successfully complete.
wlanwd is comprised of:
- Shell scripts to enter and exit AP mode (broadcast a wifi network).
- systemd unit files to trigger the scripts when network connectivity is lost.
Settings for the rescue wifi network are found in conf/hostapd.conf .
DHCP settings for the rescue wifi network are found in conf/dnsmasq.conf.
Watchdog trigger settings can be configured in scripts/test.sh.
For instance, you may prefer test your home router rather than an internet address.