You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When connecting the AS R2 to a Linux VM (VMware Workstation 14), lsusb produces this output:
root@ubuntu:/home/test# lsusb
Bus 001 Device 008: ID 1d50:60a1 OpenMoko, Inc. Airspy
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub
Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Addition: I've managed to get lsusb -v to display the device properties (iManufacturer 1, iProduct 2, iSerial 3) correctly, however after executing airspy_info, the device again doesn't show these properties until reconnection.
So at this point i'm no longer sure this is a firmware or a linux library/software issue.
How i managed to get this working: disconnect/reconnect the device physically. After initial connection, the device may be first active in Windows as "AIRSPY" (device manager). Then connect the device to the VM, execute lsusb -v ("-d 0x1d50:" to select the AirSpy specifically). The output will contain no errors for the device.
Then execute airspy_info or any other airspy_* command, and the output error will appear, after which the device needs to be physically reconnected to work anywhere again.
Issue related to VMWare, workaround described here: airspy/airspyone_host#40 and in the wiki.
TL;DR: Edit .vmx file, add line usb.quirks.device0 = "0x1d50:0x60a1 skip-setconfig"
When connecting the AS R2 to a Linux VM (VMware Workstation 14), lsusb produces this output:
When trying airspy_info, the device is not found:
Lastly, lsusb -v produces this:
When disconnecting the device from the VM back to Windows, it will also not work in Windows until unplugged and reconnected.
The text was updated successfully, but these errors were encountered: