Windows how to flash airspy firmware

To flash firmware (from airspy_fw/airspy_rom_to_ram/airspy_rom_to_ram.bin) with USB firmware:

1. Connect AirSpy with USB to your computer
1. Launch airspy_fw/airspy_rom_to_ram/usbprog_airspy/airspy_spiflash.bat
1. Disconnect AirSpy from USB computer
1. Connect AirSpy with USB to your computer, now you can use your favorite software

To flash firmware (from airspy_fw/airspy_rom_to_ram/airspy_rom_to_ram.bin) with DFU:

1. Disconnect AirSpy from USB computer
1. Open AirSpy case and Set Jumper on P5 to position 1-2 (Boot USB0)
1. Connect AirSpy with USB to your computer
1. Download & Install USB DFU drivers from https://www.nxp.com/downloads/en/software/lpc_driver_setup.exe
1. Launch airspy_fw/airspy_rom_to_ram/dfuprog_airspy/dfuprog_airspy.bat
- If an error happens disconnect the USB and reconnect it on an other USB port and retry this step
- Avoid USB 3.0 port and try a USB 2.0 Hub if you have problems.
1. Disconnect AirSpy from USB computer
1. Set Jumper on P5 to position 2-3 (Boot SPIFI) then close the AirSpy case
1. Connect AirSpy with USB to your computer, now you can use your favorite software

Create new page _Footer

Provide feedback