Explicitly set MTU on bridge devices.

This is purely cosmetic - if a non-default MTU is configured, the bridge
will have the default MTU=1500 until a container's 'veth' is connected
and an MTU is set on the veth. That's a disconcerting, it looks like the
config has been ignored - so, set the bridge's MTU explicitly.

Fixes moby#37937

Signed-off-by: Rob Murray <rob.murray@docker.com>

integration/network/network_test.go

@@ -240,7 +240,7 @@ func TestDefaultNetworkOpts(t *testing.T) {
 
 			// Create a new network
 			networkName := "testnet"
-			network.CreateNoError(ctx, t, c, networkName, func(create *types.NetworkCreate) {
+			networkId := network.CreateNoError(ctx, t, c, networkName, func(create *types.NetworkCreate) {
 				if tc.configFrom {
 					create.ConfigFrom = &ntypes.ConfigReference{
 						Network: "from-net",
@@ -249,6 +249,15 @@ func TestDefaultNetworkOpts(t *testing.T) {
 			})
 			defer c.NetworkRemove(ctx, networkName)
 
+			// Check the MTU of the bridge itself, before any devices are connected. (The
+			// bridge's MTU will be set to the minimum MTU of anything connected to it, but
+			// it's set explicitly on the bridge anyway - so it doesn't look like the option
+			// was ignored.)
+			cmd := exec.Command("ip", "link", "show", "br-"+networkId[:12])
+			output, err := cmd.CombinedOutput()
+			assert.NilError(t, err)
+			assert.Check(t, is.Contains(string(output), fmt.Sprintf(" mtu %d ", tc.mtu)), "Bridge MTU should have been set to %d", tc.mtu)
+
 			// Start a container to inspect the MTU of its network interface
 			id1 := container.Run(ctx, t, c, container.WithNetworkMode(networkName))
 			defer c.ContainerRemove(ctx, id1, containertypes.RemoveOptions{Force: true})

libnetwork/drivers/bridge/bridge_linux.go

@@ -735,6 +735,14 @@ func (d *driver) createNetwork(config *networkConfiguration) (err error) {
 		bridgeSetup.queueStep(setupDefaultSysctl)
 	}
 
+	// Always set the bridge's MTU if specified. This is purely cosmetic; a bridge's
+	// MTU is the min MTU of device connected to it, and MTU will be set on each
+	// 'veth'. But, for a non-default MTU, the bridge's MTU will look wrong until a
+	// container is attached.
+	if config.Mtu > 0 {
+		bridgeSetup.queueStep(setupMTU)
+	}
+
 	// Even if a bridge exists try to setup IPv4.
 	bridgeSetup.queueStep(setupBridgeIPv4)
 

libnetwork/drivers/bridge/setup_device_linux.go

@@ -45,6 +45,14 @@ func setupDevice(config *networkConfiguration, i *bridgeInterface) error {
 	return nil
 }
 
+func setupMTU(config *networkConfiguration, i *bridgeInterface) error {
+	if err := i.nlh.LinkSetMTU(i.Link, config.Mtu); err != nil {
+		log.G(context.TODO()).WithError(err).Errorf("Failed to set bridge MTU %s via netlink", config.BridgeName)
+		return err
+	}
+	return nil
+}
+
 func setupDefaultSysctl(config *networkConfiguration, i *bridgeInterface) error {
 	// Disable IPv6 router advertisements originating on the bridge
 	sysPath := filepath.Join("/proc/sys/net/ipv6/conf/", config.BridgeName, "accept_ra")