ueventd.cpp

/*
 * Copyright (C) 2010 The Android Open Source Project
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "ueventd.h"

#include <android/api-level.h>
#include <ctype.h>
#include <dirent.h>
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/wait.h>
#include <unistd.h>

#include <set>
#include <thread>

#include <android-base/chrono_utils.h>
#include <android-base/logging.h>
#include <android-base/properties.h>
#include <fstab/fstab.h>
#include <selinux/android.h>
#include <selinux/selinux.h>

#include "devices.h"
#include "firmware_handler.h"
#include "modalias_handler.h"
#include "selabel.h"
#include "selinux.h"
#include "uevent_handler.h"
#include "uevent_listener.h"
#include "ueventd_parser.h"
#include "util.h"

// At a high level, ueventd listens for uevent messages generated by the kernel through a netlink
// socket.  When ueventd receives such a message it handles it by taking appropriate actions,
// which can typically be creating a device node in /dev, setting file permissions, setting selinux
// labels, etc.
// Ueventd also handles loading of firmware that the kernel requests, and creates symlinks for block
// and character devices.

// When ueventd starts, it regenerates uevents for all currently registered devices by traversing
// /sys and writing 'add' to each 'uevent' file that it finds.  This causes the kernel to generate
// and resend uevent messages for all of the currently registered devices.  This is done, because
// ueventd would not have been running when these devices were registered and therefore was unable
// to receive their uevent messages and handle them appropriately.  This process is known as
// 'cold boot'.

// 'init' currently waits synchronously on the cold boot process of ueventd before it continues
// its boot process.  For this reason, cold boot should be as quick as possible.  One way to achieve
// a speed up here is to parallelize the handling of ueventd messages, which consume the bulk of the
// time during cold boot.

// Handling of uevent messages has two unique properties:
// 1) It can be done in isolation; it doesn't need to read or write any status once it is started.
// 2) It uses setegid() and setfscreatecon() so either care (aka locking) must be taken to ensure
//    that no file system operations are done while the uevent process has an abnormal egid or
//    fscreatecon or this handling must happen in a separate process.
// Given the above two properties, it is best to fork() subprocesses to handle the uevents.  This
// reduces the overhead and complexity that would be required in a solution with threads and locks.
// In testing, a racy multithreaded solution has the same performance as the fork() solution, so
// there is no reason to deal with the complexity of the former.

// One other important caveat during the boot process is the handling of SELinux restorecon.
// Since many devices have child devices, calling selinux_android_restorecon() recursively for each
// device when its uevent is handled, results in multiple restorecon operations being done on a
// given file.  It is more efficient to simply do restorecon recursively on /sys during cold boot,
// than to do restorecon on each device as its uevent is handled.  This only applies to cold boot;
// once that has completed, restorecon is done for each device as its uevent is handled.

// With all of the above considered, the cold boot process has the below steps:
// 1) ueventd regenerates uevents by doing the /sys traversal and listens to the netlink socket for
//    the generated uevents.  It writes these uevents into a queue represented by a vector.
//
// 2) ueventd forks 'n' separate uevent handler subprocesses and has each of them to handle the
//    uevents in the queue based on a starting offset (their process number) and a stride (the total
//    number of processes).  Note that no IPC happens at this point and only const functions from
//    DeviceHandler should be called from this context.
//
// 3) In parallel to the subprocesses handling the uevents, the main thread of ueventd calls
//    selinux_android_restorecon() recursively on /sys/class, /sys/block, and /sys/devices.
//
// 4) Once the restorecon operation finishes, the main thread calls waitpid() to wait for all
//    subprocess handlers to complete and exit.  Once this happens, it marks coldboot as having
//    completed.
//
// At this point, ueventd is single threaded, poll()'s and then handles any future uevents.

// Lastly, it should be noted that uevents that occur during the coldboot process are handled
// without issue after the coldboot process completes.  This is because the uevent listener is
// paused while the uevent handler and restorecon actions take place.  Once coldboot completes,
// the uevent listener resumes in polling mode and will handle the uevents that occurred during
// coldboot.

namespace android {
namespace init {

class ColdBoot {
  public:
    ColdBoot(UeventListener& uevent_listener,
             std::vector<std::unique_ptr<UeventHandler>>& uevent_handlers,
             bool enable_parallel_restorecon,
             std::vector<std::string> parallel_restorecon_queue)
        : uevent_listener_(uevent_listener),
          uevent_handlers_(uevent_handlers),
          num_handler_subprocesses_(std::thread::hardware_concurrency() ?: 4),
          enable_parallel_restorecon_(enable_parallel_restorecon),
          parallel_restorecon_queue_(parallel_restorecon_queue) {}

    void Run();

  private:
    void UeventHandlerMain(unsigned int process_num, unsigned int total_processes);
    void RegenerateUevents();
    void ForkSubProcesses();
    void WaitForSubProcesses();
    void RestoreConHandler(unsigned int process_num, unsigned int total_processes);
    void GenerateRestoreCon(const std::string& directory);

    UeventListener& uevent_listener_;
    std::vector<std::unique_ptr<UeventHandler>>& uevent_handlers_;

    unsigned int num_handler_subprocesses_;
    bool enable_parallel_restorecon_;

    std::vector<Uevent> uevent_queue_;

    std::set<pid_t> subprocess_pids_;

    std::vector<std::string> restorecon_queue_;

    std::vector<std::string> parallel_restorecon_queue_;
};

void ColdBoot::UeventHandlerMain(unsigned int process_num, unsigned int total_processes) {
    for (unsigned int i = process_num; i < uevent_queue_.size(); i += total_processes) {
        auto& uevent = uevent_queue_[i];

        for (auto& uevent_handler : uevent_handlers_) {
            uevent_handler->HandleUevent(uevent);
        }
    }
}

void ColdBoot::RestoreConHandler(unsigned int process_num, unsigned int total_processes) {
    android::base::Timer t_process;

    for (unsigned int i = process_num; i < restorecon_queue_.size(); i += total_processes) {
        android::base::Timer t;
        auto& dir = restorecon_queue_[i];

        selinux_android_restorecon(dir.c_str(), SELINUX_ANDROID_RESTORECON_RECURSE);

        //Mark a dir restorecon operation for 50ms,
        //Maybe you can add this dir to the ueventd.rc script to parallel processing
        if (t.duration() > 50ms) {
            LOG(INFO) << "took " << t.duration().count() <<"ms restorecon '"
                        << dir.c_str() << "' on process '" << process_num  <<"'";
        }
    }

    //Calculate process restorecon time
    LOG(VERBOSE) << "took " << t_process.duration().count() << "ms on process '"
                << process_num  << "'";
}

void ColdBoot::GenerateRestoreCon(const std::string& directory) {
    std::unique_ptr<DIR, decltype(&closedir)> dir(opendir(directory.c_str()), &closedir);

    if (!dir) {
        PLOG(WARNING) << "opendir " << directory.c_str();
        return;
    }

    struct dirent* dent;
    while ((dent = readdir(dir.get())) != NULL) {
        if (strcmp(dent->d_name, ".") == 0 || strcmp(dent->d_name, "..") == 0) continue;

        struct stat st;
        if (fstatat(dirfd(dir.get()), dent->d_name, &st, 0) == -1) continue;

        if (S_ISDIR(st.st_mode)) {
            std::string fullpath = directory + "/" + dent->d_name;
            auto parallel_restorecon =
                std::find(parallel_restorecon_queue_.begin(),
                    parallel_restorecon_queue_.end(), fullpath);
            if (parallel_restorecon == parallel_restorecon_queue_.end()) {
                restorecon_queue_.emplace_back(fullpath);
            }
        }
    }
}

void ColdBoot::RegenerateUevents() {
    uevent_listener_.RegenerateUevents([this](const Uevent& uevent) {
        uevent_queue_.emplace_back(uevent);
        return ListenerAction::kContinue;
    });
}

void ColdBoot::ForkSubProcesses() {
    for (unsigned int i = 0; i < num_handler_subprocesses_; ++i) {
        auto pid = fork();
        if (pid < 0) {
            PLOG(FATAL) << "fork() failed!";
        }

        if (pid == 0) {
            UeventHandlerMain(i, num_handler_subprocesses_);
            if (enable_parallel_restorecon_) {
                RestoreConHandler(i, num_handler_subprocesses_);
            }
            _exit(EXIT_SUCCESS);
        }

        subprocess_pids_.emplace(pid);
    }
}

void ColdBoot::WaitForSubProcesses() {
    // Treat subprocesses that crash or get stuck the same as if ueventd itself has crashed or gets
    // stuck.
    //
    // When a subprocess crashes, we fatally abort from ueventd.  init will restart ueventd when
    // init reaps it, and the cold boot process will start again.  If this continues to fail, then
    // since ueventd is marked as a critical service, init will reboot to bootloader.
    //
    // When a subprocess gets stuck, keep ueventd spinning waiting for it.  init has a timeout for
    // cold boot and will reboot to the bootloader if ueventd does not complete in time.
    while (!subprocess_pids_.empty()) {
        int status;
        pid_t pid = TEMP_FAILURE_RETRY(waitpid(-1, &status, 0));
        if (pid == -1) {
            PLOG(ERROR) << "waitpid() failed";
            continue;
        }

        auto it = std::find(subprocess_pids_.begin(), subprocess_pids_.end(), pid);
        if (it == subprocess_pids_.end()) continue;

        if (WIFEXITED(status)) {
            if (WEXITSTATUS(status) == EXIT_SUCCESS) {
                subprocess_pids_.erase(it);
            } else {
                LOG(FATAL) << "subprocess exited with status " << WEXITSTATUS(status);
            }
        } else if (WIFSIGNALED(status)) {
            LOG(FATAL) << "subprocess killed by signal " << WTERMSIG(status);
        }
    }
}

void ColdBoot::Run() {
    android::base::Timer cold_boot_timer;

    RegenerateUevents();

    if (enable_parallel_restorecon_) {
        if (parallel_restorecon_queue_.empty()) {
            parallel_restorecon_queue_.emplace_back("/sys");
            // takes long time for /sys/devices, parallelize it
            parallel_restorecon_queue_.emplace_back("/sys/devices");
            LOG(INFO) << "Parallel processing directory is not set, set the default";
        }
        for (const auto& dir : parallel_restorecon_queue_) {
            selinux_android_restorecon(dir.c_str(), 0);
            GenerateRestoreCon(dir);
        }
    }

    ForkSubProcesses();

    if (!enable_parallel_restorecon_) {
        selinux_android_restorecon("/sys", SELINUX_ANDROID_RESTORECON_RECURSE);
    }

    WaitForSubProcesses();

    android::base::SetProperty(kColdBootDoneProp, "true");
    LOG(INFO) << "Coldboot took " << cold_boot_timer.duration().count() / 1000.0f << " seconds";
}

static UeventdConfiguration GetConfiguration() {
    if (IsMicrodroid()) {
        return ParseConfig({"/system/etc/ueventd.rc", "/vendor/etc/ueventd.rc"});
    }

    auto hardware = android::base::GetProperty("ro.hardware", "");

    struct LegacyPathInfo {
        std::string legacy_path;
        std::string preferred;
    };
    std::vector<LegacyPathInfo> legacy_paths{
            {"/vendor/ueventd.rc", "/vendor/etc/ueventd.rc"},
            {"/odm/ueventd.rc", "/odm/etc/ueventd.rc"},
            {"/ueventd." + hardware + ".rc", "another ueventd.rc file"}};

    std::vector<std::string> canonical{"/system/etc/ueventd.rc"};

    if (android::base::GetIntProperty("ro.product.first_api_level", 10000) < __ANDROID_API_T__) {
        // TODO: Remove these legacy paths once Android S is no longer supported.
        for (const auto& info : legacy_paths) {
            canonical.push_back(info.legacy_path);
        }
    } else {
        // Warn if newer device is using legacy paths.
        for (const auto& info : legacy_paths) {
            if (access(info.legacy_path.c_str(), F_OK) == 0) {
                LOG(FATAL_WITHOUT_ABORT)
                        << "Legacy ueventd configuration file detected and will not be parsed: "
                        << info.legacy_path << ". Please move your configuration to "
                        << info.preferred << " instead.";
            }
        }
    }

    return ParseConfig(canonical);
}

int ueventd_main(int argc, char** argv) {
    /*
     * init sets the umask to 077 for forked processes. We need to
     * create files with exact permissions, without modification by
     * the umask.
     */
    umask(000);

    android::base::InitLogging(argv, &android::base::KernelLogger);

    LOG(INFO) << "ueventd started!";

    SelinuxSetupKernelLogging();
    SelabelInitialize();

    std::vector<std::unique_ptr<UeventHandler>> uevent_handlers;

    auto ueventd_configuration = GetConfiguration();

    uevent_handlers.emplace_back(std::make_unique<DeviceHandler>(
            std::move(ueventd_configuration.dev_permissions),
            std::move(ueventd_configuration.sysfs_permissions),
            std::move(ueventd_configuration.subsystems), android::fs_mgr::GetBootDevices(), true));
    uevent_handlers.emplace_back(std::make_unique<FirmwareHandler>(
            std::move(ueventd_configuration.firmware_directories),
            std::move(ueventd_configuration.external_firmware_handlers)));

    if (ueventd_configuration.enable_modalias_handling) {
        std::vector<std::string> base_paths = {"/odm/lib/modules", "/vendor/lib/modules"};
        uevent_handlers.emplace_back(std::make_unique<ModaliasHandler>(base_paths));
    }
    UeventListener uevent_listener(ueventd_configuration.uevent_socket_rcvbuf_size);

    if (!android::base::GetBoolProperty(kColdBootDoneProp, false)) {
        ColdBoot cold_boot(uevent_listener, uevent_handlers,
                           ueventd_configuration.enable_parallel_restorecon,
                           ueventd_configuration.parallel_restorecon_dirs);
        cold_boot.Run();
    }

    for (auto& uevent_handler : uevent_handlers) {
        uevent_handler->ColdbootDone();
    }

    // We use waitpid() in ColdBoot, so we can't ignore SIGCHLD until now.
    signal(SIGCHLD, SIG_IGN);
    // Reap and pending children that exited between the last call to waitpid() and setting SIG_IGN
    // for SIGCHLD above.
    while (waitpid(-1, nullptr, WNOHANG) > 0) {
    }

    // Restore prio before main loop
    setpriority(PRIO_PROCESS, 0, 0);
    uevent_listener.Poll([&uevent_handlers](const Uevent& uevent) {
        for (auto& uevent_handler : uevent_handlers) {
            uevent_handler->HandleUevent(uevent);
        }
        return ListenerAction::kContinue;
    });

    return 0;
}

}  // namespace init
}  // namespace android