Description

This fork of LEETMOUSE by chilliams and systemofapwne adds in Classic acceleration, a sigmoid function acceleration and changes the functionality of sensitivity to behave more like RawAccel. It is supported by the in-progress GUI tool https://github.com/Skyl3r/leetmouse-gui. Below are the changes from this fork:

• Pre Scale is removed
• Post Scale is removed
• Sensitivity is made to behave more like RawAccel (post calculation multiplier, like Post Scale)
• Classic acceleration is added (Needs testing)
• Sigmoid function acceleration added (Needs testing)

The LEETMOUSE kernelmodule enables quake-live like acceleration for your mouse on Linux and is heavily inspired by previous works from Povohat’s mouse driver for Windows. LEETMOUSE basically fuses the original Linux USB mouse driver code with the acceleration code-base and has been initially developed by Christopher Williams. Since the original work was in a rough state and seem to have been abandonned, this fork has been started.

Installation & Uninstallation

Preparation & Configuration

• Clone this repository, copy driver/config.sample.h to /driver/config.h and edit it in your favorite text editor. Change the defines at the top of config.h to match your desired acceleration settings.
• Make sure, you have the required toolchains (e.g. base-devel on Arch or build-essentials on Debian) installed as well as the linux-headers for your installed kernel.

Arch/Manjaro

Since the maintainer of LEETMOUSE is an Arch and Manjaro user, a PKGBUILD has been written for seamless integration into pacman.

Installation

# Create the PKGBUILD, copy associated files and run makepkg
./scripts/build_arch.sh
# Run pacman on the created package
sudo pacman -U pkg/build/leetmouse*.zst

All your mice should now be bound to this driver. They will also automatically bind to it after a reboot. If this did not work, run sudo /usr/lib/udev/leetmouse_manage bind_all

Uninstallation

sudo pacman -R leetmouse-driver-dkms

All your mice should now be bound to the generic usbhid driver again.

Other distros

Other distributions’ package-managers are not yet supported and thus need a manual installation. However Debian based systems are planned. The installation is not yet very polished but eventually will become so.

Installation

Determine the current version of this module by examining the variable DKMS_VER in the Makefile. It can be e.g. 0.9.0 Run the following commands to build and install the kernel module

# Install the driver and activate the dkms module
sudo make setup_dkms && sudo make udev_install
sudo dkms install -m leetmouse-driver -v 0.9.0 # Enter the version you determined from the Makefile earlier in here

All your mice should now be bound to this driver. They will also automatically bind to it after a reboot. If this did not work, run sudo /usr/lib/udev/leetmouse_manage bind_all If this still does not work, there is a major problem

Uninstallation

You again need to know then version as described above for the installation

# Unbind all mice from the driver
sudo /usr/lib/udev/leetmouse_manage unbind_all
# Uninstall the driver
sudo dkms remove -m leetmouse-driver -v 0.9.0
sudo make remove_dkms && sudo make udev_uninstall

Unplug and replug your mouse or reboot to have your mice bound back to the generic usbhid.

Manual compile, insmod, bind

If you want to compile this module only for testing purposes or development, you do not need to install the whole package to your system

Compile the module, remove previously loaded modules and insert it.

make clean && make
sudo rmmod leetmouse
sudo insmod ./driver/leetmouse.ko

If you did not install the udev rules before via sudo make udev_install you need to manually bind your mouse to this driver. You can take a look at /scripts/bind.sh for an example on how to determine your mouse’s USB address for that. However using the udev rules for development is advised.

TODOS

GUI to configure the acceleration parameters	Current priority
AUR package release	Once it reaches version 1.0 (basically after having a working GUI)
dpkg package for Debian based systems	After AUR release
Feature parity with Povohats driver and later even RawAccel	When I find time - Definitely after aboves milestones
External interface for dynamically pushing acceleration parameters	Done
Fixing the only vertical srolling bug	Done
Easier installation & binding	Done
DKMS support	Done
PKGBUILD for Arch based systems	Done