New module: cnos_vlan and various utility files

lib/ansible/module_utils/cnos_errorcodes.py

@@ -0,0 +1,256 @@
+# This code is part of Ansible, but is an independent component.
+# This particular file snippet, and this file snippet only, is BSD licensed.
+# Modules you write using this snippet, which is embedded dynamically by
+# Ansible still belong to the author of the module, and may assign their own
+# license to the complete work.
+#
+# Copyright (C) 2017 Lenovo, Inc.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice,
+#    this list of conditions and the following disclaimer in the documentation
+#    and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# Contains error codes and methods
+# Lenovo Networking
+
+errorDict = {0: 'Success',
+             1: 'NOK',
+             101: 'Device Response Timed out',
+             102: 'Command Not supported - Use CLI command',
+             103: 'Invalid Context',
+             104: 'Command Value Not Supported as of Now. Use vlan Id only',
+             105: 'Invalid interface Range',
+             106: 'Please provide Enable Password.',
+             108: '',
+             109: '',
+             110: 'Invalid protocol option',
+             111: 'The Value is not Integer',
+             112: 'The Value is not Float',
+             113: 'Value is not in Range',
+             114: 'Range value is not Integer',
+             115: 'Value is not in Options',
+             116: 'The Value is not Long',
+             117: 'Range value is not Long',
+             118: 'The Value cannot be empty',
+             119: 'The Value is not String',
+             120: 'The Value is not Matching',
+             121: 'The Value is not IPV4 Address',
+             122: 'The Value is not IPV6 Address',
+             123: '',
+             124: '',
+             125: '',
+             126: '',
+             127: '',
+             128: '',
+             129: '',
+             130: 'Invalid Access Map Name',
+             131: 'Invalid Vlan Dot1q Tag',
+             132: 'Invalid Vlan filter value',
+             133: 'Invalid Vlan Range Value',
+             134: 'Invalid Vlan Id',
+             135: 'Invalid Vlan Access Map Action',
+             136: 'Invalid Vlan Access Map Name',
+             137: 'Invalid Access List',
+             138: 'Invalid Vlan Access Map parameter',
+             139: 'Invalid Vlan Name',
+             140: 'Invalid Vlan Flood value,',
+             141: 'Invalid Vlan State Value',
+             142: 'Invalid Vlan Last Member query Interval',
+             143: 'Invalid Querier IP address',
+             144: 'Invalid Querier Time out',
+             145: 'Invalid Query Interval',
+             146: 'Invalid Vlan query max response time',
+             147: 'Invalid vlan robustness variable',
+             148: 'Invalid Vlan Startup Query count',
+             149: 'Invalid vlan Startup Query Interval',
+             150: 'Invalid Vlan snooping version',
+             151: 'Invalid Vlan Ethernet Interface',
+             152: 'Invalid Vlan Port Tag Number',
+             153: 'Invalid mrouter option',
+             154: 'Invalid Vlan Option',
+             155: '',
+             156: '',
+             157: '',
+             158: '',
+             159: '',
+             160: 'Invalid Vlag Auto Recovery Value',
+             161: 'Invalid Vlag Config Consistency Value',
+             162: 'Invalid Vlag Port Aggregation Number',
+             163: 'Invalid Vlag Priority Value',
+             164: 'Invalid Vlag Startup delay value',
+             165: 'Invalid Vlag Trie Id',
+             166: 'Invalid Vlag Instance Option',
+             167: 'Invalid Vlag Keep Alive Attempts',
+             168: 'Invalid Vlag Keep Alive Interval',
+             169: 'Invalid Vlag Retry Interval',
+             170: 'Invalid Vlag Peer Ip VRF Value',
+             171: 'Invalid Vlag Health Check Options',
+             172: 'Invalid Vlag Option',
+             173: '',
+             174: '',
+             175: '',
+             176: 'Invalid BGP As Number',
+             177: 'Invalid Routing protocol option',
+             178: 'Invalid BGP Address Family',
+             179: 'Invalid AS Path options',
+             180: 'Invalid BGP med options',
+             181: 'Invalid Best Path option',
+             182: 'Invalid BGP Local count number',
+             183: 'Cluster Id has to either IP or AS Number',
+             184: 'Invalid confederation identifier',
+             185: 'Invalid Confederation Peer AS Value',
+             186: 'Invalid Confederation Option',
+             187: 'Invalid state path relay value',
+             188: 'Invalid Maxas Limit AS Value',
+             189: 'Invalid Neighbor IP Address or Neighbor AS Number',
+             190: 'Invalid Router Id',
+             191: 'Invalid BGP Keep Alive Interval',
+             192: 'Invalid BGP Hold time',
+             193: 'Invalid BGP Option',
+             194: 'Invalid BGP Address Family option',
+             195: 'Invalid BGP Address Family Redistribution option. ',
+             196: 'Invalid BGP Address Family Route Map Name',
+             197: 'Invalid Next Hop Critical Delay',
+             198: 'Invalid Next Hop Non Critical Delay',
+             199: 'Invalid Multipath Number Value',
+             200: 'Invalid Aggegation Group Mode',
+             201: 'Invalid Aggregation Group No',
+             202: 'Invalid BFD Access Vlan',
+             203: 'Invalid CFD Bridgeport Mode',
+             204: 'Invalid Trunk Option',
+             205: 'Invalid BFD Option',
+             206: 'Invalid Portchannel description',
+             207: 'Invalid Portchannel duplex option',
+             208: 'Invalid Flow control option state',
+             209: 'Invalid Flow control option',
+             210: 'Invalid LACP Port priority',
+             211: 'Invalid LACP Time out options',
+             212: 'Invalid LACP Command options',
+             213: 'Invalid LLDP TLV Option',
+             214: 'Invalid LLDP Option',
+             215: 'Invalid Load interval delay',
+             216: 'Invalid Load interval Counter Number',
+             217: 'Invalid Load Interval option',
+             218: 'Invalid Mac Access Group Name',
+             219: 'Invalid Mac Address',
+             220: 'Invalid Microburst threshold value',
+             221: 'Invalid MTU Value',
+             222: 'Invalid Service instance value',
+             223: 'Invalid service policy name',
+             224: 'Invalid service policy options',
+             225: 'Invalid Interface speed value',
+             226: 'Invalid Storm control level value',
+             227: 'Invalid Storm control option',
+             228: 'Invalid Portchannel dot1q tag',
+             229: 'Invalid VRRP Id Value',
+             230: 'Invalid VRRP Options',
+             231: 'Invalid portchannel source interface option',
+             232: 'Invalid portchannel load balance options',
+             233: 'Invalid Portchannel configuration attribute',
+             234: 'Invalid BFD Interval Value',
+             235: 'Invalid BFD minrx Value',
+             236: 'Invalid BFD multiplier Value',
+             237: 'Invalid Key Chain Value',
+             238: 'Invalid key name option',
+             239: 'Invalid key id value',
+             240: 'Invalid Key Option',
+             241: 'Invalid authentication option',
+             242: 'Invalid destination Ip',
+             243: 'Invalid source Ip',
+             244: 'Invalid IP Option',
+             245: 'Invalid Access group option',
+             246: 'Invalid Access group name',
+             247: 'Invalid ARP MacAddress Value',
+             248: 'Invalid ARP timeout value',
+             249: 'Invalid ARP Option',
+             250: 'Invalid dhcp request option',
+             251: 'Invalid dhcp Client option',
+             252: 'Invalid relay Ip Address',
+             253: 'Invalid dhcp Option',
+             254: 'Invalid OSPF Option',
+             255: 'Invalid OSPF Id IP Address Value',
+             256: 'Invalid Ip Router Option',
+             257: 'Invalid Spanning tree bpdufilter Options',
+             258: 'Invalid Spanning tree bpduguard Options',
+             259: 'Invalid Spanning tree cost Options',
+             260: 'Invalid Spanning tree guard Options',
+             261: 'Invalid Spanning tree link-type Options',
+             262: 'Invalid Spanning tree link-type Options',
+             263: 'Invalid Spanning tree options',
+             264: 'Port-priority in increments of 32 is required',
+             265: 'Invalid Spanning tree vlan options',
+             266: 'Invalid IPv6 option',
+             267: 'Invalid IPV6 neighbor IP Address',
+             268: 'Invalid IPV6 neighbor mac addres',
+             269: 'Invalid IPV6 dhcp option',
+             270: 'Invalid IPV6 relay address option',
+             271: 'Invalid IPV6 Ethernet option',
+             272: 'Invalid IPV6 Vlan option',
+             273: 'Invalid IPV6 Link Local option',
+             274: 'Invalid IPV6 dhcp option',
+             275: 'Invalid IPV6 Address',
+             276: 'Invalid IPV6 Address option',
+             277: 'Invalid BFD neighbor options',
+             278: 'Invalid Secondary option',
+             289: 'Invalid PortChannel IPV4 address',
+             290: 'Invalid Max Path Options',
+             291: 'Invalid Distance Local Route value',
+             292: 'Invalid Distance Internal AS value',
+             293: 'Invalid Distance External AS value',
+             294: 'Invalid BGP Reachability Half Life',
+             295: 'Invalid BGP Dampening parameter',
+             296: 'Invalid BGP Aggregate Prefix value',
+             297: 'Invalid BGP Aggregate Prefix Option',
+             298: 'Invalid BGP Address Family Route Map Name',
+             299: 'Invalid BGP Net IP Mask Value',
+             300: 'Invalid BGP Net IP Prefix Value',
+             301: 'Invalid BGP Neighbor configuration option',
+             302: 'Invalid BGP Neighbor Weight Value',
+             303: 'Invalid Neigbor update source option',
+             304: 'Invalid Ethernet slot/chassis number',
+             305: 'Invalid Loopback Interface number',
+             306: 'Invalid vlan id',
+             307: 'Invalid Number of hops',
+             308: 'Invalid Neighbor Keepalive interval',
+             309: 'Invalid Neighbor timer hold time',
+             310: 'Invalid neighbor password ',
+             311: 'Invalid Max peer limit',
+             312: 'Invalid Local AS Number',
+             313: 'Invalid maximum hop count',
+             314: 'Invalid neighbor description',
+             315: 'Invalid Neighbor connect timer value',
+             316: 'Invalid Neighbor address family option',
+             317: 'Invalid neighbor address family option',
+             318: 'Invalid route-map name',
+             319: 'Invalid route-map',
+             320: 'Invalid Name of a prefix list',
+             321: 'Invalid Filter incoming option',
+             322: 'Invalid AS path access-list name',
+             323: 'Invalid Filter route option',
+             324: 'Invalid route-map name',
+             325: 'Invalid Number of occurrences of AS number',
+             326: 'Invalid Prefix Limit'}
+
+
+def getErrorString(errorCode):
+    retVal = errorDict[int(errorCode)]
+    return retVal
+# EOM