Adding exos_command cli_conf module

.github/BOTMETA.yml

@@ -456,6 +456,7 @@ files:
   $modules/network/edgeos/: samdoran
   $modules/network/enos/: amuraleedhar
   $modules/network/eos/: privateip trishnaguha
+  $modules/network/exos/: rdvencioneck
   $modules/network/f5/:
     ignored: Etienne-Carriere mhite mryanlam perzizzle srvg wojtek0806 JoeReifel
     maintainers: caphrim007
@@ -819,6 +820,9 @@ files:
   $module_utils/network/enos:
     maintainers: amuraleedhar
     labels: networking
+  $module_utils/network/exos:
+    maintainers: rdvencioneck
+    labels: networking
   $module_utils/f5_utils.py:
     maintainers: caphrim007
     labels:
@@ -938,6 +942,9 @@ files:
   lib/ansible/plugins/cliconf/:
     maintainers: $team_networking
     labels: networking
+  lib/ansible/plugins/cliconf/exos.py:
+    maintainers: rdvencioneck
+    labels: networking
   lib/ansible/plugins/cliconf/ironware.py:
     maintainers: paulquack
     labels: networking
@@ -1019,6 +1026,9 @@ files:
   lib/ansible/plugins/terminal/eos.py:
     maintainers: $team_networking
     labels: networking
+  lib/ansible/plugins/terminal/exos.py:
+    maintainers: rdvencioneck
+    labels: networking
   lib/ansible/plugins/terminal/ios.py:
     maintainers: $team_networking
     labels: networking

lib/ansible/module_utils/network/exos/exos.py

@@ -0,0 +1,101 @@
+# This code is part of Ansible, but is an independent component.
+# This particular file snippet, and this file snippet only, is BSD licensed.
+# Modules you write using this snippet, which is embedded dynamically by Ansible
+# still belong to the author of the module, and may assign their own license
+# to the complete work.
+#
+# (c) 2016 Red Hat Inc.
+#
+# Redistribution and use in source and binary forms, with or without modification,
+# are permitted provided that the following conditions are met:
+#
+#    * Redistributions of source code must retain the above copyright
+#      notice, this list of conditions and the following disclaimer.
+#    * Redistributions in binary form must reproduce the above copyright notice,
+#      this list of conditions and the following disclaimer in the documentation
+#      and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+import json
+from ansible.module_utils._text import to_text
+from ansible.module_utils.basic import env_fallback, return_values
+from ansible.module_utils.network.common.utils import to_list
+from ansible.module_utils.connection import Connection
+
+_DEVICE_CONFIGS = {}
+
+
+def get_connection(module):
+    if hasattr(module, '_exos_connection'):
+        return module._exos_connection
+
+    capabilities = get_capabilities(module)
+    network_api = capabilities.get('network_api')
+
+    if network_api == 'cliconf':
+        module._exos_connection = Connection(module._socket_path)
+    else:
+        module.fail_json(msg='Invalid connection type %s' % network_api)
+
+    return module._exos_connection
+
+
+def get_capabilities(module):
+    if hasattr(module, '_exos_capabilities'):
+        return module._exos_capabilities
+
+    capabilities = Connection(module._socket_path).get_capabilities()
+    module._exos_capabilities = json.loads(capabilities)
+
+    return module._exos_capabilities
+
+
+def get_config(module, flags=None):
+    global _DEVICE_CONFIGS
+
+    if _DEVICE_CONFIGS != {}:
+        return _DEVICE_CONFIGS
+    else:
+        connection = get_connection(module)
+        out = connection.get_config()
+        cfg = to_text(out, errors='surrogate_then_replace').strip()
+        _DEVICE_CONFIGS = cfg
+        return cfg
+
+
+def run_commands(module, commands, check_rc=True):
+    responses = list()
+    connection = get_connection(module)
+
+    for cmd in to_list(commands):
+        if isinstance(cmd, dict):
+            command = cmd['command']
+            prompt = cmd['prompt']
+            answer = cmd['answer']
+        else:
+            command = cmd
+            prompt = None
+            answer = None
+        out = connection.get(command, prompt, answer)
+
+        try:
+            out = to_text(out, errors='surrogate_or_strict')
+        except UnicodeError:
+            module.fail_json(msg=u'Failed to decode output from %s: %s' % (cmd, to_text(out)))
+        responses.append(out)
+
+    return responses
+
+
+def load_config(module, commands):
+    connection = get_connection(module)
+    out = connection.edit_config(commands)

lib/ansible/modules/network/exos/exos_command.py

@@ -0,0 +1,236 @@
+#!/usr/bin/python
+#
+# This file is part of Ansible
+#
+# Ansible is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Ansible is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+from __future__ import absolute_import, division, print_function
+__metaclass__ = type
+
+
+ANSIBLE_METADATA = {'metadata_version': '1.1',
+                    'status': ['preview'],
+                    'supported_by': 'community'}
+
+
+DOCUMENTATION = """
+---
+module: exos_command
+version_added: "2.6"
+author: "Rafael D. Vencioneck (@rdvencioneck)"
+short_description: Run commands on remote devices running Extreme EXOS
+description:
+  - Sends arbitrary commands to an Extreme EXOS device and returns the results
+    read from the device. This module includes an argument that will cause the
+    module to wait for a specific condition before returning or timing out if
+    the condition is not met.
+  - This module does not support running configuration commands.
+    Please use M(exos_config) to configure EXOS devices.
+notes:
+  - If a command sent to the device requires answering a prompt, it is possible
+    to pass a dict containing I(command), I(answer) and I(prompt). See examples.
+options:
+  commands:
+    description:
+      - List of commands to send to the remote EXOS device over the
+        configured provider. The resulting output from the command
+        is returned. If the I(wait_for) argument is provided, the
+        module is not returned until the condition is satisfied or
+        the number of retries has expired.
+    required: true
+  wait_for:
+    description:
+      - List of conditions to evaluate against the output of the
+        command. The task will wait for each condition to be true
+        before moving forward. If the conditional is not true
+        within the configured number of retries, the task fails.
+        See examples.
+    default: null
+  match:
+    description:
+      - The I(match) argument is used in conjunction with the
+        I(wait_for) argument to specify the match policy.  Valid
+        values are C(all) or C(any).  If the value is set to C(all)
+        then all conditionals in the wait_for must be satisfied.  If
+        the value is set to C(any) then only one of the values must be
+        satisfied.
+    default: all
+    choices: ['any', 'all']
+  retries:
+    description:
+      - Specifies the number of retries a command should by tried
+        before it is considered failed. The command is run on the
+        target device every retry and evaluated against the
+        I(wait_for) conditions.
+    default: 10
+  interval:
+    description:
+      - Configures the interval in seconds to wait between retries
+        of the command. If the command does not pass the specified
+        conditions, the interval indicates how long to wait before
+        trying the command again.
+    default: 1
+"""
+
+EXAMPLES = """
+tasks:
+  - name: run show version on remote devices
+    exos_command:
+      commands: show version
+  - name: run show version and check to see if output contains ExtremeXOS
+    exos_command:
+      commands: show version
+      wait_for: result[0] contains ExtremeXOS
+  - name: run multiple commands on remote nodes
+    exos_command:
+      commands:
+        - show version
+        - show ports no-refresh
+  - name: run multiple commands and evaluate the output
+    exos_command:
+      commands:
+        - show version
+        - show ports no-refresh
+      wait_for:
+        - result[0] contains ExtremeXOS
+        - result[1] contains 20
+  - name: run command that requires answering a prompt
+    exos_command:
+      commands:
+        - command: 'clear license-info'
+          prompt: 'Are you sure.*'
+          answer: 'Yes'
+"""
+
+RETURN = """
+stdout:
+  description: The set of responses from the commands
+  returned: always apart from low level errors (such as action plugin)
+  type: list
+  sample: ['...', '...']
+stdout_lines:
+  description: The value of stdout split into a list
+  returned: always apart from low level errors (such as action plugin)
+  type: list
+  sample: [['...', '...'], ['...'], ['...']]
+failed_conditions:
+  description: The list of conditionals that have failed
+  returned: failed
+  type: list
+  sample: ['...', '...']
+"""
+import re
+import time
+
+from ansible.module_utils.network.exos.exos import run_commands
+from ansible.module_utils.basic import AnsibleModule
+from ansible.module_utils.network.common.utils import ComplexList
+from ansible.module_utils.network.common.parsing import Conditional
+from ansible.module_utils.six import string_types
+
+
+def to_lines(stdout):
+    for item in stdout:
+        if isinstance(item, string_types):
+            item = str(item).split('\n')
+        yield item
+
+
+def parse_commands(module, warnings):
+    command = ComplexList(dict(
+        command=dict(key=True),
+        prompt=dict(),
+        answer=dict()
+    ), module)
+    commands = command(module.params['commands'])
+    for item in list(commands):
+        command_split = re.match(r'^(\w*)(.*)$', item['command'])
+        if module.check_mode and not item['command'].startswith('show'):
+            warnings.append(
+                'only show commands are supported when using check mode, not '
+                'executing `%s`' % item['command']
+            )
+            commands.remove(item)
+        elif command_split and command_split.group(1) not in ('check', 'clear', 'debug', 'history',
+                                                              'ls', 'mrinfo', 'mtrace', 'nslookup',
+                                                              'ping', 'rtlookup', 'show', 'traceroute'):
+            module.fail_json(
+                msg='some commands were not recognized. exos_command can only run read-only'
+                    'commands. For configuration commands, please use exos_config instead'
+            )
+    return commands
+
+
+def main():
+    """main entry point for module execution
+    """
+    argument_spec = dict(
+        commands=dict(type='list', required=True),
+
+        wait_for=dict(type='list'),
+        match=dict(default='all', choices=['all', 'any']),
+
+        retries=dict(default=10, type='int'),
+        interval=dict(default=1, type='int')
+    )
+
+    module = AnsibleModule(argument_spec=argument_spec,
+                           supports_check_mode=True)
+
+    result = {'changed': False}
+
+    warnings = list()
+    commands = parse_commands(module, warnings)
+    result['warnings'] = warnings
+
+    wait_for = module.params['wait_for'] or list()
+    conditionals = [Conditional(c) for c in wait_for]
+
+    retries = module.params['retries']
+    interval = module.params['interval']
+    match = module.params['match']
+
+    while retries > 0:
+        responses = run_commands(module, commands)
+
+        for item in list(conditionals):
+            if item(responses):
+                if match == 'any':
+                    conditionals = list()
+                    break
+                conditionals.remove(item)
+
+        if not conditionals:
+            break
+
+        time.sleep(interval)
+        retries -= 1
+
+    if conditionals:
+        failed_conditions = [item.raw for item in conditionals]
+        msg = 'One or more conditional statements have not be satisfied'
+        module.fail_json(msg=msg, failed_conditions=failed_conditions)
+
+    result.update({
+        'changed': False,
+        'stdout': responses,
+        'stdout_lines': list(to_lines(responses))
+    })
+
+    module.exit_json(**result)
+
+
+if __name__ == '__main__':
+    main()