Table Dump1090

This project displays ADS-B flight data from the Dump1090 server in a dynamic HTML table.

Features

• Real-time visualization of ADS-B flight data
• Sorting and filtering of data by various attributes
• Direct link to FlightRadar24 and ADS-B exchange for each flight

Installation

For Raspberry Pi Users i developed a simple automatic installation script.
Copy and paste it in your terminal, than press enter.

sudo bash -c "$(wget -O - https://raw.githubusercontent.com/anthonyborriello/table-dump1090/main/radar_table.sh)"

Or you can proceed manually:

1. Dump1090 server should already be installed to provide the required json data.
2. Clone the repository

sudo apt install git  
git clone https://github.com/anthonyborriello/table-dump1090

You can alternatively download the required PHP file like this:

wget https://raw.githubusercontent.com/anthonyborriello/table-dump1090/main/radar_table.php

3. You should install PHP in your web server and enable it.
   If you are using lighttpd:

sudo apt install php8.2 php8.2-fpm php8.2-cgi
sudo lighty-enable-mod fastcgi-php-fpm  
sudo service lighttpd force-reload

Customization

1. In the radar_table.php file, customize the URL in the $response variable to match your Dump1090 server setup
   (e.g., 'http://yourserveraddress:8080/data/aircraft.json')
2. Locate the following lines of code: $reference_point = array(41.9028, 12.4964);
3. Replace the values with your Latitude and Longitude:
   example for Rome: 41.9028, 12.4964
4. Save the changes and close the file.
5. Insert the radar_table.php page into your web service folder (usually /var/www/html/).

sudo mv radar_table.php /var/www/html/

6. Reload the radar_table.php page in your web browser to see the updated flight data for the new location.

Usage

1. Open the radar_table.php file in a web browser. (Usually http://raspberrypi:8080/data/radar_table.php)
2. Check the displayed flight data.
3. Click on flight links for further information.

Contributing

If you would like to contribute to this project, follow these steps:

1. Fork the repository.
2. Create a branch for your changes (git checkout -b feature/your-feature).
3. Commit your changes (git commit -am 'Add new feature').
4. Push the branch (git push origin feature/your-feature).
5. Open a Pull Request.

Author

🇮🇹 Antonio Borriello - Website

License

This project is licensed under the MIT License.