---

---

Bob

Lowpass filter with LFO/envelope follower modulation

Operation

• ENC1 adjusts main output level.
• ENC2 changes first parameter displayed on screen.
• ENC3 changes second parameter displayed on screen.
• KEY2 go to previous page.
• KEY3 go to next page.
• KEY2+KEY3 fine tune parameter mode.
• ARC first two encoders act as norns ENC2 and ENC3.

Parameters

• CUTOFF / Cutoff - 20Hz...10kHz. Filter cutoff frequency.
• RES / Resonance - 0...100%. Filter resonance.
• LFO / LFO Rate - 0.01Hz..50Hz.
• L>FRQ / LFO > Cutoff - -100%..+100%. Filter cutoff LFO modulation amount.
• E.ATK / EnvF Attack - 0.1ms...2s. Envelope follower attack time.
• E.DEC / EnvF Decay - 0.1ms...8s. Envelope follower release time.
• E.SNS / EnvF Sensitivity - 0.1ms...8s. Envelope follower sensitivity.
• E>FRQ / EnvF > Cutoff - -100%...+100%. Envelope follower cutoff modulation amount.

Parameters are available both in script mode (short names) and in the global parameters list.

---

---

Moln

Polyphonic subtractive synthesizer

Features

• 2 square oscillators per voice with variable pulse width and pulse width modulation.
• Resonant lowpass filter
• ADSR envelope

Operation

• ENC1 adjusts main output level.
• ENC2 changes first parameter displayed on screen.
• ENC3 changes second parameter displayed on screen.
• KEY2 go to previous page.
• KEY3 go to next page.
• KEY2+KEY3 fine tune parameter mode.
• ARC first two encoders act as norns ENC2 and ENC3.
• MIDI device plays notes.
• GRID plays notes too.

Parameters

• FREQ / Filter Frequency - 10Hz...8kHz. Lowpass filter cutoff frequency.
• RES / Filter Resonance - 0...100%. Lowpass filter cutoff resonance.
• A.RNG / Osc A Range - -2..+2. Octave range.
• B.RNG / Osc B Range - -2..+2. Octave range.
• A.PW / Osc A Pulse Width - 0..100%.
• B.PW / Osc B Pulse Width - 0..100%.
• DETUN / Osc Detune - 0...100%. Detunes the two oscillators.
• LFO / PWM Rate - 0.01Hz..50Hz. Pulse Width Modulation rate.
• PWM / PWM Depth - 0...100%. Pulse Width Modulation depth.
• E>FIL / Env > Filter Frequency - -100%...100%. Lowpass filter envelope modulation amount.
• E.ATK / Env Attack - 0.1ms...2s. ADSR envelope attack time.
• E.DEC / Env Decay - 0.1ms...8s. ADSR envelope decay time.
• E.SUS / Env Sustain - 0...100%. ADSR envelope sustain level.
• E.REL / Env Release - 0.1ms...8s. ADSR envelope release time.

Parameters are available both in script mode (short names) and in the global parameters list.

---

---

Rymd

Cross-feedback delay with damping and delay line modulation

Operation

• ENC1 adjusts main output level.
• ENC2 changes first parameter displayed on screen.
• ENC3 changes second parameter displayed on screen.
• KEY2 go to previous page.
• KEY3 go to next page.
• KEY2+KEY3 fine tune parameter mode.
• ARC first two encoders act as norns ENC2 and ENC3.

Parameters

• DIR / Direct - -inf...+12dB. Direct signal level
• SEND / Delay Send - -inf...+12dB. Delay send level.
• L.TIME / Delay Time Left - 0.1ms..5s. Default is 400ms.
• R.TIME / Delay Time Right - 0.1ms..5s. Default is 400ms.
• DAMP / Damping - 300Hz..10kHz. Lowpass filter damping in delay feedback path.
• FBK / Feedback - 0%...100%. Delay feedback.
• RATE / Mod Rate - 0.01Hz...50Hz. Modulation rate.
• MOD / Delay Time Mod Depth - 0...100%. Delay time modulation depth.

Parameters are available both in script mode (short names) and in the global parameters list.

---

---

Skev

Pitch and frequency shifter with modulation

Operation

• ENC1 adjusts main output level.
• ENC2 changes first parameter displayed on screen.
• ENC3 changes second parameter displayed on screen.
• KEY2 go to previous page.
• KEY3 go to next page.
• KEY2+KEY3 fine tune parameter mode.
• ARC first two encoders act as norns ENC2 and ENC3.

Parameters

• F.SHFT / Freq Shift - -2000Hz...+2000Hz.
• P.RAT / Pitch Ratio - 0%...400%.
• P.DISP / Pitch Dispersion - 0%...400%.
• T.DISP / Time Dispersion - 0%...100%.
• LFO.HZ / LFO Rate - 0.01Hz..50Hz.
• >F.SHFT / LFO > Freq Shift - -100%...+100%. LFO frequency shift modulation.
• >P.RAT / LFO > Pitch Ratio - -100%...+100%. LFO pitch ratio modulation.

Parameters are available both in script mode (short names) and in the global parameters list.