boards/nrf5340-dk: add RPMSG HCI controller support and examples

boards/arm/nrf53/nrf5340-dk/configs/rpmsghci_bt_cpuapp/defconfig

@@ -0,0 +1,68 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NET_IPv4 is not set
+# CONFIG_STANDARD_SERIAL is not set
+CONFIG_ALLOW_BSD_COMPONENTS=y
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="nrf5340-dk"
+CONFIG_ARCH_BOARD_NRF5340_DK=y
+CONFIG_ARCH_CHIP="nrf53"
+CONFIG_ARCH_CHIP_NRF5340=y
+CONFIG_ARCH_CHIP_NRF5340_CPUAPP=y
+CONFIG_ARCH_CHIP_NRF53=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_STDARG_H=y
+CONFIG_BLUETOOTH_MAX_CONN=2
+CONFIG_BLUETOOTH_RPMSG=y
+CONFIG_BOARD_LOOPSPERMSEC=5500
+CONFIG_BTSAK=y
+CONFIG_BUILTIN=y
+CONFIG_DEV_SIMPLE_ADDRENV=y
+CONFIG_DRIVERS_BLUETOOTH=y
+CONFIG_DRIVERS_WIRELESS=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FS_PROCFS=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MM_REGIONS=2
+CONFIG_NET=y
+CONFIG_NETDEV_LATEINIT=y
+CONFIG_NET_BLUETOOTH=y
+CONFIG_NRF53_OSCILLATOR_LFXO=y
+CONFIG_NRF53_UART0=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_OPENAMP=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_PTHREAD_MUTEX_TYPES=y
+CONFIG_RAM_SIZE=524288
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RPTUN=y
+CONFIG_RPTUN_LOCAL_CPUNAME="cpuapp"
+CONFIG_RPTUN_PING=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SIG_EVTHREAD=y
+CONFIG_STACK_CANARIES=y
+CONFIG_STACK_COLORATION=y
+CONFIG_STACK_USAGE=y
+CONFIG_START_DAY=26
+CONFIG_START_MONTH=3
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=64
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_BLUETOOTH=y

boards/arm/nrf53/nrf5340-dk/configs/rpmsghci_nimble_cpuapp/defconfig

@@ -0,0 +1,69 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NET_IPv4 is not set
+# CONFIG_STANDARD_SERIAL is not set
+# CONFIG_WIRELESS_BLUETOOTH_HOST is not set
+CONFIG_ALLOW_BSD_COMPONENTS=y
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="nrf5340-dk"
+CONFIG_ARCH_BOARD_NRF5340_DK=y
+CONFIG_ARCH_CHIP="nrf53"
+CONFIG_ARCH_CHIP_NRF5340=y
+CONFIG_ARCH_CHIP_NRF5340_CPUAPP=y
+CONFIG_ARCH_CHIP_NRF53=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_STDARG_H=y
+CONFIG_BLUETOOTH_MAX_CONN=2
+CONFIG_BLUETOOTH_RPMSG=y
+CONFIG_BOARD_LOOPSPERMSEC=5500
+CONFIG_BUILTIN=y
+CONFIG_DEV_SIMPLE_ADDRENV=y
+CONFIG_DRIVERS_BLUETOOTH=y
+CONFIG_DRIVERS_WIRELESS=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FS_PROCFS=y
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MM_REGIONS=2
+CONFIG_NET=y
+CONFIG_NETDEV_LATEINIT=y
+CONFIG_NET_BLUETOOTH=y
+CONFIG_NIMBLE=y
+CONFIG_NRF53_OSCILLATOR_LFXO=y
+CONFIG_NRF53_UART0=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_OPENAMP=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_PTHREAD_MUTEX_TYPES=y
+CONFIG_RAM_SIZE=524288
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RPTUN=y
+CONFIG_RPTUN_LOCAL_CPUNAME="cpuapp"
+CONFIG_RPTUN_PING=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SIG_EVTHREAD=y
+CONFIG_STACK_CANARIES=y
+CONFIG_STACK_COLORATION=y
+CONFIG_STACK_USAGE=y
+CONFIG_START_DAY=26
+CONFIG_START_MONTH=3
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=64
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_BLUETOOTH=y

boards/arm/nrf53/nrf5340-dk/configs/rpmsghci_sdc_cpunet/defconfig

@@ -0,0 +1,55 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_STANDARD_SERIAL is not set
+CONFIG_ALLOW_BSDNORDIC_COMPONENTS=y
+CONFIG_ALLOW_BSD_COMPONENTS=y
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="nrf5340-dk"
+CONFIG_ARCH_BOARD_NRF5340_DK=y
+CONFIG_ARCH_CHIP="nrf53"
+CONFIG_ARCH_CHIP_NRF5340=y
+CONFIG_ARCH_CHIP_NRF5340_CPUNET=y
+CONFIG_ARCH_CHIP_NRF53=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_STDARG_H=y
+CONFIG_BLUETOOTH_RPMSG_SERVER=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARDCTL_MKRD=y
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=5500
+CONFIG_DEV_SIMPLE_ADDRENV=y
+CONFIG_DRIVERS_BLUETOOTH=y
+CONFIG_DRIVERS_WIRELESS=y
+CONFIG_EXAMPLES_HELLO=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENTRYPOINT="hello_main"
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MM_REGIONS=2
+CONFIG_NRF53_SDC_MAX_COUNT=2
+CONFIG_NRF53_SDC_PUB_ADDR=0x0102030405
+CONFIG_NRF53_SOFTDEVICE_CONTROLLER=y
+CONFIG_NRF53_UART0=y
+CONFIG_OPENAMP=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=65535
+CONFIG_RAM_START=0x21000000
+CONFIG_RAW_BINARY=y
+CONFIG_RPTUN=y
+CONFIG_RPTUN_LOCAL_CPUNAME="cpunet"
+CONFIG_RPTUN_PING=y
+CONFIG_RPTUN_STACKSIZE=2048
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_START_DAY=26
+CONFIG_START_MONTH=3
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+CONFIG_SYSLOG_MAX_CHANNELS=2
+CONFIG_SYSTEM_READLINE=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_UART0_SERIAL_CONSOLE=y

boards/arm/nrf53/nrf5340-dk/src/nrf53_bringup.c

@@ -24,6 +24,7 @@
 
 #include <nuttx/config.h>
 
+#include <errno.h>
 #include <sys/types.h>
 #include <syslog.h>
 
@@ -32,21 +33,121 @@
 #ifdef CONFIG_USERLED
 #  include <nuttx/leds/userled.h>
 #endif
+#ifdef CONFIG_RPMSG_UART
+#  include <nuttx/serial/uart_rpmsg.h>
+#endif
 
 #ifdef CONFIG_NRF53_SOFTDEVICE_CONTROLLER
 #  include "nrf53_sdc.h"
 #endif
 
 #ifdef CONFIG_RPTUN
+#  include <nuttx/wireless/bluetooth/bt_rpmsghci.h>
+#  ifdef CONFIG_UART_BTH4
+#    include <nuttx/serial/uart_bth4.h>
+#  endif
+#  ifdef CONFIG_NET_BLUETOOTH
+#    include <nuttx/wireless/bluetooth/bt_driver.h>
+#  endif
 #  include "nrf53_rptun.h"
 #endif
 
 #include "nrf5340-dk.h"
 
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+#ifdef CONFIG_NRF53_APPCORE
+
+/****************************************************************************
+ * Name: nrf53_appcore_bleinit
+ ****************************************************************************/
+
+static int nrf53_appcore_bleinit(void)
+{
+  struct bt_driver_s *bt_dev = NULL;
+  int                 ret    = OK;
+
+#ifdef CONFIG_BLUETOOTH_RPMSG
+  bt_dev = rpmsghci_register("appcore", "bthci");
+  if (bt_dev == NULL)
+    {
+      syslog(LOG_ERR, "ERROR: rpmsghci_register() failed: %d\n", -errno);
+      return -ENOMEM;
+    }
+
+#  ifdef CONFIG_UART_BTH4
+  /* Register UART BT H4 device */
+
+  ret = uart_bth4_register("/dev/ttyHCI", bt_dev);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "bt_bth4_register error: %d\n", ret);
+    }
+#  elif defined(CONFIG_NET_BLUETOOTH)
+  /* Register network device */
+
+  ret = bt_netdev_register(bt_dev);
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "bt_netdev_register error: %d\n", ret);
+    }
+#  else
+#    error
+#  endif
+#endif
+
+  return ret;
+}
+
+#else
+
+/****************************************************************************
+ * Name: nrf53_netcore_bleinit
+ ****************************************************************************/
+
+static int nrf53_netcore_bleinit(void)
+{
+  int ret = OK;
+
+#ifdef CONFIG_NRF53_SOFTDEVICE_CONTROLLER
+#  ifdef CONFIG_BLUETOOTH_RPMSG_SERVER
+  ret = nrf53_rpmsghci_server_initialize("bthci");
+  if (ret < 0)
+    {
+      syslog(LOG_ERR,
+             "ERROR: nrf53_rpmsghci_server_initialize() failed: %d\n",
+             ret);
+    }
+#  else
+  ret = nrf53_sdc_initialize();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: nrf53_sdc_initialize() failed: %d\n", ret);
+    }
+#  endif
+#endif
+
+  return ret;
+}
+#endif
+
 /****************************************************************************
  * Public Functions
  ****************************************************************************/
 
+#ifdef CONFIG_RPMSG_UART
+void rpmsg_serialinit(void)
+{
+#ifdef CONFIG_NRF53_APPCORE
+  uart_rpmsg_init("appcore", "proxy", 4096, false);
+#else
+  uart_rpmsg_init("netcore", "proxy", 4096, true);
+#endif
+}
+#endif
+
 /****************************************************************************
  * Name: nrf53_bringup
  *
@@ -94,12 +195,19 @@ int nrf53_bringup(void)
 #endif
 #endif
 
-#ifdef CONFIG_NRF53_SOFTDEVICE_CONTROLLER
-  ret = nrf53_sdc_initialize();
+  /* Initialize BLE */
 
+#ifdef CONFIG_NRF53_APPCORE
+  ret = nrf53_appcore_bleinit();
   if (ret < 0)
     {
-      syslog(LOG_ERR, "ERROR: nrf53_sdc_initialize() failed: %d\n", ret);
+      syslog(LOG_ERR, "ERROR: nrf53_appcore_bleinit failed: %d\n", ret);
+    }
+#else
+  ret = nrf53_netcore_bleinit();
+  if (ret < 0)
+    {
+      syslog(LOG_ERR, "ERROR: nrf53_netcore_bleinit failed: %d\n", ret);
     }
 #endif