Table of Contents

• Smappee Domoticz Bash Scripts
  • Author
  • Requirements
  • How to use it
  • Cron example to run this script every minute
  • Suggestion: Use a RAM Disk
  • Controlling Smappee plugs from Domoticz

Smappee Domoticz Bash Scripts

Bash scripts to:

• Gather values from Smappee hub (locally) and upload them to Domoticz
• Control Smappee plugs

Scripts use Smappee local API to control plugs and to get the Smappee data. A dummy sensor and Domoticz API is used to push the data.

Author

I saw the initial great and original idea in Domoticz Forums so all the credit goes to user niceandeasy.

I just improved the bash script code and documented this repo to help other users to set it up and added a secondary script to control Smappee plugs.

Any other suggestion will be welcome and pull-requests are welcome too.

Requirements

3 basic commands are required in the script:

• curl: for HTTP requests
• sed: for sifting out what we need from Smappee's output
• bc: for calculating cumulative usage

To ensure you have them all, just do the following:

sudo apt-get update && sudo apt-get install curl sed bc

How to use it

1. Clone this repo

git clone https://github.com/apazga/smappee-domoticz-bash.git

1. Create the directory where the script will be (or use the one you prefer)

mkdir -p /home/pi/_scripts/crons

1. Copy smappee_bash_extractor.sh to the desired location

cp smappee-domoticz-bash/smappee_bash_extractor.sh  /home/pi/_scripts/crons

1. Add a new "Smappee" hardware in your Domoticz server as "Dummy (Does nothing, use for virtual switches only)"

2. Add four new "Virtual Sensors" to this new hardware (from Hardware list, button "Create Virtual Sensors"):

Name: Energy Consumption
Type: Electric (Instant+counter)

Name: Voltage
Type: Voltage

Name: Ampere
Type: Ampere (1 phase)

Name: Cos Phi
Type: Custom sensor

1. Edit required variables in smappee_bash_extractor.sh script. You should configure all variables included in "User configurable values zone". WARNING: Check twice the idx for each variable in your Domoticz Device list to ensure all match, to avoid "pushing" data to a different sensor

You should configure the following variables:

• DOMOTICZ_URL: Specify your Domoticz URL, using http or https (depending on your Domoticz configuration)
• SMAPPEE_IP: The IP of your Smappee hub
• TMPDIR: Temporary directory for the script (see section "Suggestion: Use a RAM Disk")
• DOMOTICZ_WATTS_IDX: idx for your Electric (Instant+Counter) virtual sensor
• DOMOTICZ_VOLTS_IDX: idx for your Voltage virtual sensor
• DOMOTICZ_AMPS_IDX: idx for your Ampere (1 phase) virtual sensor
• DOMOTICZ_COSF_IDX: idx for your Custom sensor (cos phi) virtual sensor

1. Test it before setting it as a cron job

cd /home/pi/_scripts/crons
chmod u+x smappee_bash_extractor.sh
./smappee_bash_extractor.sh

Cron example to run this script every minute

Add the following line to your user crontab (crontab -e)

*/1 * * * *    /home/pi/_scripts/crons/smappee_bash_extractor.sh

Suggestion: Use a RAM Disk

Due to we are writing every minute, it's highly recommended to create a RAM disk.

To simplify the process, if you want to create 1 MByte RAM disk in your /var/tmp directory, just add the following line at the end of /etc/fstab and do sudo mount -a or reboot.

tmpfs /var/tmp tmpfs nodev,nosuid,size=1M 0 0

More info and RAM Disk tutorial here: http://www.domoticz.com/wiki/Setting_up_a_RAM_drive_on_Raspberry_Pi

Controlling Smappee plugs from Domoticz

First, in your Domoticz server terminal

1. Copy smappee_plug_control.sh to the desired location

cp smappee-domoticz-bash/smappee_plug_control.sh  /home/pi/_scripts/

1. Edit the script to set your Smappee IP.

2. Run the script with "list" parameter to list your available plugs using the local API.

chmod u+x smappee_plug_control.sh
./smappee_plug_control.sh list

You'll see an output like this one:

Listing available plugs
Login...
{"success":"Logon successful!","header":"Logon to the monitor portal successful..."}

Available plugs:
[{"value":"My plug 1 ","key":"1"},{"value":"My plug 2 ","key":"3"}]

Then, in your Domoticz web:

1. Add a new "Manual Switch" in your Domoticz server and use Switch Type "On/Off" and Type "X10" (type isn't important here).

2. Edit your new switch and set these scripts as "on/off" actions:

On action: script:///home/pi/_scripts/smappee_plug_control.sh 1 3
Off action: script:///home/pi/_scripts/smappee_plug_control.sh 0 3

These commands should power on/off the plug with key (id) 3, that will be "My plug 2" from the previous example.