Protocol-oriented integers

Proposal: SE-0104
Authors: Dave Abrahams, Maxim Moiseev
Review Manager: Ben Cohen
Status: Implemented (Swift 4)
Bug: SR-3196
Previous Revisions: 1, 2, 3
Discussion on swift-evolution: here.
Decision notes: Rationale

Introduction

This proposal cleans up Swifts integer APIs and makes them more useful for generic programming.

The language has evolved in ways that affect integers APIs since the time the original proposal was approved for Swift 3. We also attempted to implement the proposed model in the standard library and found that some essential APIs were missing, whereas others could be safely removed.

Major changes to the APIs introduced by this revision are listed in a dedicated section.

Motivation

Swift's integer protocols don't currently provide a suitable basis for generic programming. See this blog post for an example of an attempt to implement a generic algorithm over integers.

The way the IntegerArithmetic protocol is defined, it does not generalize to floating point numbers and also slows down compilation by requiring every concrete type to provide an implementation of arithmetic operators, thus polluting the overload set.

Converting from one integer type to another is performed using the concept of the 'maximum width integer' (see MaxInt), which is an artificial limitation. The very existence of MaxInt makes it unclear what to do should someone implement Int256, for example.

Another annoying problem is the inability to use integers of different types in comparison and bit-shift operations. For example, the following snippets won't compile:

var x: Int8 = 42
let y = 1
let z = 0

x <<= y   // error: binary operator '<<=' cannot be applied to operands of type 'Int8' and 'Int'
if x > z { ... }  // error: binary operator '>' cannot be applied to operands of type 'Int8' and 'Int'

Currently, bit-shifting a negative number of (or too many) bits causes a trap on some platforms, which makes low-level bit manipulations needlessly dangerous and unpredictable.

Finally, the current design predates many of the improvements that came since Swift 1, and hasn't been revised since then.

Proposed solution

We propose a new model that does not have above mentioned problems and is more easily extensible.

                +-------------+   +-------------+
        +------>+   Numeric   |   | Comparable  |
        |       |   (+,-,*)   |   | (==,<,>,...)|
        |       +------------++   +---+---------+
        |                     ^       ^
+-------+------------+        |       |
|    SignedNumeric   |      +-+-------+-----------+
|     (unary -)      |      |    BinaryInteger    |
+------+-------------+      |(words,%,bitwise,...)|
       ^                    ++---+-----+----------+
       |         +-----------^   ^     ^---------------+
       |         |               |                     |
+------+---------++    +---------+---------------+  +--+----------------+
|  SignedInteger  |    |  FixedWidthInteger      |  |  UnsignedInteger  |
|                 |    |(endianness,overflow,...)|  |                   |
+---------------+-+    +-+--------------------+--+  +-+-----------------+
                ^        ^                    ^       ^
                |        |                    |       |
                |        |                    |       |
               ++--------+-+                +-+-------+-+
               |Int family |-+              |UInt family|-+
               +-----------+ |              +-----------+ |
                 +-----------+                +-----------+

There are several benefits provided by this model over the old one:

It allows mixing integer types in generic functions.

The possibility to initialize instances of any concrete integer type with values of any other concrete integer type enables writing functions that operate on more than one type conforming to BinaryInteger, such as heterogeneous comparisons or bit shifts, described later.
It removes the overload resolution overhead.

Arithmetic and bitwise operations can now be defined as generic operators on protocols. This approach significantly reduces the number of overloads for those operations, which used to be defined for every single concrete integer type.
It enables protocol sharing between integer and floating point types.

Note the exclusion of the % operation from Numeric. Its behavior for floating point numbers is sufficiently different from the one for integers that using it in generic context would lead to confusion. The FloatingPoint protocol introduced by SE-0067 should now refine SignedNumeric.
It makes future extensions possible.

The proposed model eliminates the 'largest integer type' concept previously used to interoperate between integer types (see toIntMax in the current model) and instead provides access to machine words. It also introduces the multipliedFullWidth(by:), dividingFullWidth(_:), and quotientAndRemainder methods. Together these changes can be used to provide an efficient implementation of bignums that would be hard to achieve otherwise.

The implementation of proposed model in the standard library is available in the new-integer-protocols branch.

A note on bit shifts

This proposal introduces the concepts of smart shifts and masking shifts.

The semantics of shift operations are often undefined in under- or over-shift cases. Smart shifts, implemented by >> and <<, are designed to address this problem and always behave in a well defined way, as shown in the examples below:

x << -2 is equivalent to x >> 2
(1 as UInt8) >> 42 will evaluate to 0
(-128 as Int8) >> 42 will evaluate to 0xff or -1

In most scenarios, the right hand operand is a literal constant, and branches for handling under- and over-shift cases can be optimized away. For other cases, this proposal provides masking shifts, implemented by &>> and &<<. A masking shift logically preprocesses the right hand operand by masking its bits to produce a value in the range 0...(x-1) where x is the number of bits in the left hand operand. On most architectures this masking is already performed by the CPU's shift instructions and has no cost. Both kinds of shift avoid undefined behavior and produce uniform semantics across architectures.

Detailed design

What's new in this revision

Shift operators were reorganized (pull request)
- Masking shift operators were moved from BinaryInteger to FixedWidthInteger.
- Non-masking shift operators were moved from FixedWidthInteger to BinaryInteger.
Rationale: attempts to implement masking shifts for arbitrary-precision integers have failed because the semantics aren't clear. Attempts to clarify the definition of the semantics of masking shift for BinaryInteger have failed, indicating that the operation doesn't actually make sense outside of FixedWidthInteger.
ArithmeticOverflow was removed in favor of using a simple Bool.

Rationale: the enum proves to have poor ergonomics. It only appears as part of a result tuple, where a label already helps counteract the readability deficit usually caused by returning an un-labeled Bool.
BinaryInteger's initializers from floating point values were changed from:
```
init?<T : FloatingPoint>(exactly source: T)
init<T : FloatingPoint>(_ source: T)
```
to:
```
init?<T : BinaryFloatingPoint>(exactly source: T)
init<T : BinaryFloatingPoint>(_ source: T)
```
Rationale: Attempts to implement these initializers for arbitrary models of FloatingPoint have failed (see here and here) whereas they are clearly implementable for models of BinaryFloatingPoint, suggesting that the operation doesn't actually make sense outside of BinaryFloatingPoint.
BinaryInteger's init(extendingOrTruncating:) was renamed to init(truncatingIfNeeded:)

Rationale: extendingOrTruncating emphasizes a part of the semantics (“extending”) that is lossless and thus doesn't warrant the implied warning of an argument label. The two use cases for this initializer are intentional truncation and optimizing out range checks that are known by the programmer to be un-needed. Both these cases are better served by truncatingIfNeeded.

Protocols

`Numeric`

The Numeric protocol declares binary arithmetic operators – such as +, -, and * — and their mutating counterparts.

It provides a suitable basis for arithmetic on scalars such as integers and floating point numbers.

Both mutating and non-mutating operations are declared in the protocol, however only the mutating ones are required, as default implementations of the non-mutating ones are provided by a protocol extension.

The Magnitude associated type is able to hold the absolute value of any possible value of Self. Concrete types do not have to provide a type alias for it, as it can be inferred from the magnitude property. This property can be useful in operations that are simpler to implement in terms of unsigned values, for example, printing a value of an integer, which is just printing a '-' character in front of an absolute value.

Please note that for ordinary work, the magnitude property should not be preferred to the abs(_) function, whose return value is of the same type as its argument.

public protocol Numeric : Equatable, ExpressibleByIntegerLiteral {
  /// Creates a new instance from the given integer, if it can be represented
  /// exactly.
  ///
  /// If the value passed as `source` is not representable exactly, the result
  /// is `nil`. In the following example, the constant `x` is successfully
  /// created from a value of `100`, while the attempt to initialize the
  /// constant `y` from `1_000` fails because the `Int8` type can represent
  /// `127` at maximum:
  ///
  ///     let x = Int8(exactly: 100)
  ///     // x == Optional(100)
  ///     let y = Int8(exactly: 1_000)
  ///     // y == nil
  ///
  /// - Parameter source: A BinaryInteger value to convert to an integer.
  init?<T : BinaryInteger>(exactly source: T)

  /// A type that can represent the absolute value of any possible value of the
  /// conforming type.
  associatedtype Magnitude : Numeric, Comparable

  /// The magnitude of this value.
  ///
  /// For any numeric value `x`, `x.magnitude` is the absolute value of `x`.
  /// You can use the `magnitude` property in operations that are simpler to
  /// implement in terms of unsigned values, such as printing the value of an
  /// integer, which is just printing a '-' character in front of an absolute
  /// value.
  ///
  ///     let x = -200
  ///     // x.magnitude == 200
  ///
  /// The global `abs(_:)` function provides more familiar syntax when you need
  /// to find an absolute value. In addition, because `abs(_:)` always returns
  /// a value of the same type, even in a generic context, using the function
  /// instead of the `magnitude` property is encouraged.
  ///
  /// - SeeAlso: `abs(_:)`
  var magnitude: Magnitude { get }

  /// Returns the sum of the two given values.
  ///
  /// The sum of `lhs` and `rhs` must be representable in the same type. In the
  /// following example, the result of `100 + 200` is greater than the maximum
  /// representable `Int8` value:
  ///
  ///     let x: Int8 = 10 + 21
  ///     // x == 31
  ///     let y: Int8 = 100 + 121
  ///     // Overflow error
  static func +(_ lhs: Self, _ rhs: Self) -> Self

  /// Adds the given value to this value in place.
  ///
  /// For example:
  ///
  ///     var x = 15
  ///     x += 7
  ///     // x == 22
  static func +=(_ lhs: inout Self, rhs: Self)

  /// Returns the difference of the two given values.
  ///
  /// The difference of `lhs` and `rhs` must be representable in the same type.
  /// In the following example, the result of `10 - 21` is less than zero, the
  /// minimum representable `UInt` value:
  ///
  ///     let x: UInt = 21 - 10
  ///     // x == 11
  ///     let y: UInt = 10 - 21
  ///     // Overflow error
  static func -(_ lhs: Self, _ rhs: Self) -> Self

  /// Subtracts the given value from this value in place.
  ///
  /// For example:
  ///
  ///     var x = 15
  ///     x -= 7
  ///     // x == 8
  static func -=(_ lhs: inout Self, rhs: Self)

  /// Returns the product of the two given values.
  ///
  /// The product of `lhs` and `rhs` must be representable in the same type. In
  /// the following example, the result of `10 * 50` is greater than the
  /// maximum representable `Int8` value.
  ///
  ///     let x: Int8 = 10 * 5
  ///     // x == 50
  ///     let y: Int8 = 10 * 50
  ///     // Overflow error
  static func *(_ lhs: Self, _ rhs: Self) -> Self

  /// Multiples this value by the given value in place.
  ///
  /// For example:
  ///
  ///     var x = 15
  ///     x *= 7
  ///     // x == 105
  static func *=(_ lhs: inout Self, rhs: Self)
}

extension Numeric {
  public static prefix func + (x: Self) -> Self {
    return x
  }
}

`SignedNumeric`

The SignedNumeric protocol is for numbers that can be negated.

public protocol SignedNumeric : Numeric {
  /// Returns the additive inverse of this value.
  ///
  ///     let x = 21
  ///     let y = -x
  ///     // y == -21
  ///
  /// - Returns: The additive inverse of this value.
  ///
  /// - SeeAlso: `negate()`
  static prefix func - (_ operand: Self) -> Self

  /// Replaces this value with its additive inverse.
  ///
  /// The following example uses the `negate()` method to negate the value of
  /// an integer `x`:
  ///
  ///     var x = 21
  ///     x.negate()
  ///     // x == -21
  ///
  /// - SeeAlso: The unary minus operator (`-`).
  mutating func negate()
}

extension SignedNumeric {
  public static prefix func - (_ operand: Self) -> Self {
    var result = operand
    result.negate()
    return result
  }

  public mutating func negate() {
    self = 0 - self
  }
}

`BinaryInteger`

The BinaryInteger protocol is the basis for all the integer types provided by the standard library.

This protocol adds a few new initializers. Two of them allow to create integers from floating point numbers, others support construction from instances of any type conforming to BinaryInteger, using different strategies:

Initialize Self with the value, provided that the value is representable. The precondition should be satisfied by the caller.
Extend or truncate the value to fit into Self
Clamp the value to the representable range of Self

BinaryInteger also declares bitwise and shift operators.

public protocol BinaryInteger :
  Comparable, Hashable, Numeric, CustomStringConvertible, Strideable {

  associatedtype Words : Collection // where Iterator.Element == UInt

  /// A Boolean value indicating whether this type is a signed integer type.
  ///
  /// *Signed* integer types can represent both positive and negative values.
  /// *Unsigned* integer types can represent only nonnegative values.
  static var isSigned: Bool { get }

  /// Creates an integer from the given floating-point value, if it can be
  /// represented exactly.
  ///
  /// If the value passed as `source` is not representable exactly, the result
  /// is `nil`. In the following example, the constant `x` is successfully
  /// created from a value of `21.0`, while the attempt to initialize the
  /// constant `y` from `21.5` fails:
  ///
  ///     let x = Int(exactly: 21.0)
  ///     // x == Optional(21)
  ///     let y = Int(exactly: 21.5)
  ///     // y == nil
  ///
  /// - Parameter source: A floating-point value to convert to an integer.
  init?<T : BinaryFloatingPoint>(exactly source: T)

  /// Creates an integer from the given floating-point value, truncating any
  /// fractional part.
  ///
  /// Truncating the fractional part of `source` is equivalent to rounding
  /// toward zero.
  ///
  ///     let x = Int(21.5)
  ///     // x == 21
  ///     let y = Int(-21.5)
  ///     // y == -21
  ///
  /// If `source` is outside the bounds of this type after truncation, a
  /// runtime error may occur.
  ///
  ///     let z = UInt(-21.5)
  ///     // Error: ...the result would be less than UInt.min
  ///
  /// - Parameter source: A floating-point value to convert to an integer.
  ///   `source` must be representable in this type after truncation.
  init<T : BinaryFloatingPoint>(_ source: T)

  /// Creates an new instance from the given integer.
  ///
  /// If the value passed as `source` is not representable in this type, a
  /// runtime error may occur.
  ///
  ///     let x = -500 as Int
  ///     let y = Int32(x)
  ///     // y == -500
  ///
  ///     // -500 is not representable as a 'UInt32' instance
  ///     let z = UInt32(x)
  ///     // Error
  ///
  /// - Parameter source: An integer to convert. `source` must be representable
  ///   in this type.
  init<T : BinaryInteger>(_ source: T)

  /// Creates a new instance from the bit pattern of the given instance by
  /// sign-extending or truncating to fit this type.
  ///
  /// When the bit width of `T` (the type of `source`) is equal to or greater
  /// than this type's bit width, the result is the truncated
  /// least-significant bits of `source`. For example, when converting a
  /// 16-bit value to an 8-bit type, only the lower 8 bits of `source` are
  /// used.
  ///
  ///     let p: Int16 = -500
  ///     // 'p' has a binary representation of 11111110_00001100
  ///     let q = Int8(truncatingIfNeeded: p)
  ///     // q == 12
  ///     // 'q' has a binary representation of 00001100
  ///
  /// When the bit width of `T` is less than this type's bit width, the result
  /// is *sign-extended* to fill the remaining bits. That is, if `source` is
  /// negative, the result is padded with ones; otherwise, the result is
  /// padded with zeros.
  ///
  ///     let u: Int8 = 21
  ///     // 'u' has a binary representation of 00010101
  ///     let v = Int16(truncatingIfNeeded: u)
  ///     // v == 21
  ///     // 'v' has a binary representation of 00000000_00010101
  ///
  ///     let w: Int8 = -21
  ///     // 'w' has a binary representation of 11101011
  ///     let x = Int16(truncatingIfNeeded: w)
  ///     // x == -21
  ///     // 'x' has a binary representation of 11111111_11101011
  ///     let y = UInt16(truncatingIfNeeded: w)
  ///     // y == 65515
  ///     // 'y' has a binary representation of 11111111_11101011
  ///
  /// - Parameter source: An integer to convert to this type.
  init<T : BinaryInteger>(truncatingIfNeeded source: T)

  /// Creates a new instance with the representable value that's closest to the
  /// given integer.
  ///
  /// If the value passed as `source` is greater than the maximum representable
  /// value in this type, the result is the type's `max` value. If `source` is
  /// less than the smallest representable value in this type, the result is
  /// the type's `min` value.
  ///
  /// In this example, `x` is initialized as an `Int8` instance by clamping
  /// `500` to the range `-128...127`, and `y` is initialized as a `UInt`
  /// instance by clamping `-500` to the range `0...UInt.max`.
  ///
  ///     let x = Int8(clamping: 500)
  ///     // x == 127
  ///     // x == Int8.max
  ///
  ///     let y = UInt(clamping: -500)
  ///     // y == 0
  ///
  /// - Parameter source: An integer to convert to this type.
  init<T : BinaryInteger>(clamping source: T)

  /// The collection of words in two's complement representation of the value,
  /// from the least significant to most.
  var words: Words { get }

  /// The number of bits in the current binary representation of this value.
  ///
  /// This property is a constant for instances of fixed-width integer
  /// types.
  var bitWidth : Int { get }

  /// The number of trailing zeros in this value's binary representation.
  ///
  /// For example, in a fixed-width integer type with a `bitWidth` value of 8,
  /// the number -8 has three trailing zeros.
  ///
  ///     let x = Int8(bitPattern: 0b1111_1000)
  ///     // x == -8
  ///     // x.trailingZeroBits == 3
  var trailingZeroBits: Int { get }


  /// Returns the quotient of dividing the first value by the second.
  ///
  /// For integer types, any remainder of the division is discarded.
  ///
  ///     let x = 21 / 5
  ///     // x == 4
  static func /(_ lhs: Self, _ rhs: Self) -> Self

  /// Divides this value by the given value in place.
  ///
  /// For example:
  ///
  ///     var x = 15
  ///     x /= 7
  ///     // x == 2
  static func /=(_ lhs: inout Self, rhs: Self)

  /// Returns the remainder of dividing the first value by the second.
  ///
  /// The result has the same sign as `lhs` and is less than `rhs.magnitude`.
  ///
  ///     let x = 22 % 5
  ///     // x == 2
  ///     let y = 22 % -5
  ///     // y == 2
  ///     let z = -22 % -5
  ///     // z == -2
  ///
  /// - Parameters:
  ///   - lhs: The value to divide.
  ///   - rhs: The value to divide `lhs` by. `rhs` must not be zero.
  static func %(_ lhs: Self, _ rhs: Self) -> Self

  /// Replaces this value with the remainder of itself divided by the given
  /// value. For example:
  ///
  ///     var x = 15
  ///     x %= 7
  ///     // x == 1
  ///
  /// - Parameter rhs: The value to divide this value by. `rhs` must not be
  ///   zero.
  ///
  /// - SeeAlso: `remainder(dividingBy:)`
  static func %=(_ lhs: inout Self, _ rhs: Self)

  /// Returns the inverse of the bits set in the argument.
  ///
  /// The bitwise NOT operator (`~`) is a prefix operator that returns a value
  /// in which all the bits of its argument are flipped: Bits that are `1` in
  /// the argument are `0` in the result, and bits that are `0` in the argument
  /// are `1` in the result. This is equivalent to the inverse of a set. For
  /// example:
  ///
  ///     let x: UInt8 = 5        // 0b00000101
  ///     let notX = ~x           // 0b11111010
  ///
  /// Performing a bitwise NOT operation on 0 returns a value with every bit
  /// set to `1`.
  ///
  ///     let allOnes = ~UInt8.min   // 0b11111111
  ///
  /// - Complexity: O(1).
  static prefix func ~ (_ x: Self) -> Self

  /// Returns the result of performing a bitwise AND operation on this value
  /// and the given value.
  ///
  /// A bitwise AND operation results in a value that has each bit set to `1`
  /// where *both* of its arguments have that bit set to `1`. For example:
  ///
  ///     let x: UInt8 = 5          // 0b00000101
  ///     let y: UInt8 = 14         // 0b00001110
  ///     let z = x & y             // 0b00000100
  static func &(_ lhs: Self, _ rhs: Self) -> Self
  static func &=(_ lhs: inout Self, _ rhs: Self)

  /// Returns the result of performing a bitwise OR operation on this value and
  /// the given value.
  ///
  /// A bitwise OR operation results in a value that has each bit set to `1`
  /// where *one or both* of its arguments have that bit set to `1`. For
  /// example:
  ///
  ///     let x: UInt8 = 5          // 0b00000101
  ///     let y: UInt8 = 14         // 0b00001110
  ///     let z = x | y             // 0b00001111
  static func |(_ lhs: Self, _ rhs: Self) -> Self
  static func |=(_ lhs: inout Self, _ rhs: Self)

  /// Returns the result of performing a bitwise XOR operation on this value
  /// and the given value.
  ///
  /// A bitwise XOR operation, also known as an exclusive OR operation, results
  /// in a value that has each bit set to `1` where *one or the other but not
  /// both* of its arguments had that bit set to `1`. For example:
  ///
  ///     let x: UInt8 = 5          // 0b00000101
  ///     let y: UInt8 = 14         // 0b00001110
  ///     let z = x ^ y             // 0b00001011
  static func ^(_ lhs: Self, _ rhs: Self) -> Self
  static func ^=(_ lhs: inout Self, _ rhs: Self)

  /// Returns the result of shifting this value's binary representation the
  /// specified number of digits to the right.
  static func >><RHS: BinaryInteger>(_ lhs: Self, _ rhs: RHS) -> Self

  /// Stores the result of shifting a value's binary representation the
  /// specified number of digits to the right in the left-hand-side variable.
  static func >>=<RHS: BinaryInteger>(_ lhs: inout Self, _ rhs: RHS)

  /// Returns the result of shifting a value's binary representation the
  /// specified number of digits to the left.
  static func << <RHS: BinaryInteger>(_ lhs: Self, _ rhs: RHS) -> Self

  /// Stores the result of shifting a value's binary representation the
  /// specified number of digits to the left in the left-hand-side variable
  static func <<= <RHS: BinaryInteger>(_ lhs: inout Self, _ rhs: RHS)

  /// Returns the quotient and remainder of this value divided by the given
  /// value.
  ///
  /// Use this method to calculate the quotient and remainder of a division at
  /// the same time.
  ///
  ///     let x = 1_000_000
  ///     let (q, r) = x.quotientAndRemainder(dividingBy: 933)
  ///     // q == 1071
  ///     // r == 757
  ///
  /// - Parameter rhs: The value to divide this value by.
  /// - Returns: A tuple containing the quotient and remainder of this value
  ///   divided by `rhs`.
  func quotientAndRemainder(dividingBy rhs: Self)
    -> (quotient: Self, remainder: Self)

  /// Returns `-1` if this value is negative and `1` if it's positive;
  /// otherwise, `0`.
  ///
  /// - Returns: The sign of this number, expressed as an integer of the same
  ///   type.
  func signum() -> Self
}

extension BinaryInteger {
  init() { self = 0 }
}

`FixedWidthInteger`

The FixedWidthInteger protocol adds the notion of endianness as well as static properties for type bounds and bit width.

The ReportingOverflow family of methods is used in default implementations of mutating arithmetic methods (see the Numeric protocol). Having these methods allows the library to provide both bounds-checked and masking implementations of arithmetic operations, without duplicating code.

The multipliedFullWidth(by:) and dividingFullWidth(_:) methods are necessary building blocks to implement support for integer types of a greater width such as arbitrary-precision integers.

public protocol FixedWidthInteger : BinaryInteger {
  /// The number of bits used for the underlying binary representation of
  /// values of this type.
  ///
  /// An unsigned, fixed-width integer type can represent values from 0 through
  /// `(2 ** bitWidth) - 1`, where `**` is exponentiation. A signed,
  /// fixed-width integer type can represent values from
  /// `-(2 ** bitWidth - 1)` through `(2 ** bitWidth - 1) - 1`. For example,
  /// the `Int8` type has a `bitWidth` value of 8 and can store any integer in
  /// the range `-128...127`.
  static var bitWidth : Int { get }

  /// The maximum representable integer in this type.
  ///
  /// For unsigned integer types, this value is `(2 ** bitWidth) - 1`, where
  /// `**` is exponentiation. For signed integer types, this value is
  /// `(2 ** bitWidth - 1) - 1`.
  static var max: Self { get }

  /// The minimum representable value.
  ///
  /// For unsigned integer types, this value is always `0`. For signed integer
  /// types, this value is `-(2 ** bitWidth - 1)`, where `**` is
  /// exponentiation.
  static var min: Self { get }

  /// Returns the sum of this value and the given value along with a flag
  /// indicating whether overflow occurred in the operation.
  ///
  /// - Parameter other: The value to add to this value.
  /// - Returns: A tuple containing the result of the addition along with a
  ///   flag indicating whether overflow occurred. If the `overflow` component
  ///   is `.none`, the `partialValue` component contains the entire sum. If
  ///   the `overflow` component is `.overflow`, an overflow occurred and the
  ///   `partialValue` component contains the truncated sum of this value and
  ///   `other`.
  ///
  /// - SeeAlso: `+`
  func addingReportingOverflow(_ other: Self)
    -> (partialValue: Self, overflow: Bool)

  /// Returns the difference of this value and the given value along with a
  /// flag indicating whether overflow occurred in the operation.
  ///
  /// - Parameter other: The value to subtract from this value.
  /// - Returns: A tuple containing the result of the subtraction along with a
  ///   flag indicating whether overflow occurred. If the `overflow` component
  ///   is `.none`, the `partialValue` component contains the entire
  ///   difference. If the `overflow` component is `.overflow`, an overflow
  ///   occurred and the `partialValue` component contains the truncated
  ///   result of `other` subtracted from this value.
  ///
  /// - SeeAlso: `-`
  func subtractingReportingOverflow(_ other: Self)
    -> (partialValue: Self, overflow: Bool)

  /// Returns the product of this value and the given value along with a flag
  /// indicating whether overflow occurred in the operation.
  ///
  /// - Parameter other: The value to multiply by this value.
  /// - Returns: A tuple containing the result of the multiplication along with
  ///   a flag indicating whether overflow occurred. If the `overflow`
  ///   component is `.none`, the `partialValue` component contains the entire
  ///   product. If the `overflow` component is `.overflow`, an overflow
  ///   occurred and the `partialValue` component contains the truncated
  ///   product of this value and `other`.
  ///
  /// - SeeAlso: `*`, `multipliedFullWidth(by:)`
  func multipliedReportingOverflow(by other: Self)
    -> (partialValue: Self, overflow: Bool)

  /// Returns the quotient of dividing this value by the given value along with
  /// a flag indicating whether overflow occurred in the operation.
  ///
  /// For a value `x`, if zero is passed as `other`, the result is
  /// `(x, .overflow)`.
  ///
  /// - Parameter other: The value to divide this value by.
  /// - Returns: A tuple containing the result of the division along with a
  ///   flag indicating whether overflow occurred. If the `overflow` component
  ///   is `.none`, the `partialValue` component contains the entire quotient.
  ///   If the `overflow` component is `.overflow`, an overflow occurred and
  ///   the `partialValue` component contains the truncated quotient.
  ///
  /// - SeeAlso: `/`, `dividingFullWidth(_:)`
  func dividedReportingOverflow(by other: Self)
    -> (partialValue: Self, overflow: Bool)

  /// Returns a double-width value containing the high and low parts of the
  /// result of multiplying this value by an argument.
  ///
  /// Use this method to calculate the full result of a product that would
  /// otherwise overflow. Unlike traditional truncating multiplication, the
  /// `multipliedFullWidth(by:)` method returns both the high and low
  /// parts of the product of `self` and `other`. The following example uses
  /// this method to multiply two `UInt8` values that normally overflow when
  /// multiplied:
  ///
  ///     let x: UInt8 = 100
  ///     let y: UInt8 = 20
  ///     let result = x.multipliedFullWidth(by: y)
  ///     // result.high == 0b00000111
  ///     // result.low  == 0b11010000
  ///
  /// The product of `x` and `y` is 2000, which is too large to represent in a
  /// `UInt8` instance. The `high` and `low` components of the `result`
  /// represent 2000 when concatenated to form a double-width integer; that
  /// is, using `result.high` as the high byte and `result.low` as the low byte
  /// of a `UInt16` instance.
  ///
  ///     let z = UInt16(result.high) << 8 | UInt16(result.low)
  ///     // z == 2000
  ///
  /// - Parameters:
  ///   - other: A value to multiplied `self` by.
  /// - Returns: A tuple containing the high and low parts of the result of
  ///   multiplying `self` and `other`.
  ///
  /// - SeeAlso: `multipliedReportingOverflow(by:)`
  func multipliedFullWidth(by other: Self) -> DoubleWidth<Self>

  /// Returns a tuple containing the quotient and remainder of dividing the
  /// first argument by this value.
  ///
  /// The resulting quotient must be representable within the bounds of the
  /// type. If the quotient of dividing `lhs` by `self` is too large to
  /// represent in the type, a runtime error may occur.
  ///
  /// - Parameters:
  ///   - lhs: A value containing the high and low parts of a double-width
  ///     integer. The `high` component of the tuple carries the sign, if the
  ///     type is signed.
  /// - Returns: A tuple containing the quotient and remainder of `lhs` divided
  ///   by `self`.
  func dividingFullWidth(_ lhs: DoubleWidth<Self>)
    -> (quotient: Self, remainder: Self)

  /// The number of bits equal to 1 in this value's binary representation.
  ///
  /// For example, in a fixed-width integer type with a `bitWidth` value of 8,
  /// the number 31 has five bits equal to 1.
  ///
  ///     let x: Int8 = 0b0001_1111
  ///     // x == 31
  ///     // x.populationCount == 5
  var populationCount: Int { get }

  /// The number of leading zeros in this value's binary representation.
  ///
  /// For example, in a fixed-width integer type with a `bitWidth` value of 8,
  /// the number 31 has three leading zeros.
  ///
  ///     let x: Int8 = 0b0001_1111
  ///     // x == 31
  ///     // x.leadingZeroBits == 3
  /// - SeeAlso: `BinaryInteger.trailingZeroBits`
  var leadingZeroBits: Int { get }

  /// Creates an integer from its big-endian representation, changing the
  /// byte order if necessary.
  init(bigEndian value: Self)

  /// Creates an integer from its little-endian representation, changing the
  /// byte order if necessary.
  init(littleEndian value: Self)

  /// The big-endian representation of this integer.
  ///
  /// If necessary, the byte order of this value is reversed from the typical
  /// byte order of this integer type. On a big-endian platform, for any
  /// integer `x`, `x == x.bigEndian`.
  ///
  /// - SeeAlso: `littleEndian`
  var bigEndian: Self { get }

  /// The little-endian representation of this integer.
  ///
  /// If necessary, the byte order of this value is reversed from the typical
  /// byte order of this integer type. On a little-endian platform, for any
  /// integer `x`, `x == x.littleEndian`.
  ///
  /// - SeeAlso: `bigEndian`
  var littleEndian: Self { get }

  /// A representation of this integer with the byte order swapped.
  var byteSwapped: Self { get }


  /// Returns the result of shifting a value's binary representation the
  /// specified number of digits to the right, masking the shift amount to the
  /// type's bit width.
  static func &>>(_ lhs: Self, _ rhs: Self) -> Self

  /// Calculates the result of shifting a value's binary representation the
  /// specified number of digits to the right, masking the shift amount to the
  /// type's bit width, and stores the result in the left-hand-side variable.
  static func &>>=(_ lhs: inout Self, _ rhs: Self)
  
  /// Returns the result of shifting a value's binary representation the
  /// specified number of digits to the left, masking the shift amount to the
  /// type's bit width.
  static func &<<(_ lhs: Self, _ rhs: Self) -> Self

  /// Returns the result of shifting a value's binary representation the
  /// specified number of digits to the left, masking the shift amount to the
  /// type's bit width, and stores the result in the left-hand-side variable.
  static func &<<=(_ lhs: inout Self, _ rhs: Self)
}

Auxiliary protocols

public protocol UnsignedInteger : BinaryInteger {
  associatedtype Magnitude : BinaryInteger
}
public protocol SignedInteger : BinaryInteger, SignedNumeric {
  associatedtype Magnitude : BinaryInteger
}

DoubleWidth<T>

The DoubleWidth<T> type allows to create wider fixed-width integer types from the ones available in the standard library.

Standard library currently provides fixed-width integer types of up to 64 bits. A value of DoubleWidth<Int64> will double the range of the underlying type and implement all the FixedWidthInteger requirements. Please note though that the implementation will not necessarily be the most efficient one, so it would not be a good idea to use DoubleWidth<Int32> instead of a built-in Int64.

public enum DoubleWidth<T : FixedWidthInteger> {
  case .parts(high: T, low: T.Magnitude)

  public var high: T { get }
  public var low: T.Magnitude { get }
}

Representing it as an enum instead of a simple struct allows to use it both as a single value, as well as in destructuring matches.

let high = doubleWidthValue.high
let low = doubleWidthValue.low

// or

case let (high, low) = doubleWidthValue

Extra operators

In addition to the operators described in the protocols section, we also provide a few extensions:

Non-mutating homogeneous shifts

extension FixedWidthInteger {
  public static func &>> (lhs: Self, rhs: Self) -> Self
  public static func &<< (lhs: Self, rhs: Self) -> Self

Heterogeneous shifts

extension BinaryInteger {
  // 'Smart' shifts
  static func >>  <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Self
  static func >>= <Other : BinaryInteger>(lhs: inout Self, rhs: Other)
  static func <<  <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Self
  static func <<= <Other : BinaryInteger>(lhs: inout Self, rhs: Other)
}
extension FixedWidthInteger {
  public static func &>> <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Self
  public static func &>>= <Other : BinaryInteger>(lhs: inout Self, rhs: Other)
  public static func &<< <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Self
  public static func &<<= <Other : BinaryInteger>(lhs: inout Self, rhs: Other)
}

Heterogeneous equality and comparison

extension BinaryInteger {
  // Equality
  static func == <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Bool
  static func != <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Bool

  // Comparison
  static func <  <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Bool
  static func <= <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Bool
  static func >  <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Bool
  static func >= <Other : BinaryInteger>(lhs: Self, rhs: Other) -> Bool
}

Masking arithmetic

public func &* <T: FixedWidthInteger>(lhs: T, rhs: T) -> T
public func &- <T: FixedWidthInteger>(lhs: T, rhs: T) -> T
public func &+ <T: FixedWidthInteger>(lhs: T, rhs: T) -> T

Non-goals

This proposal:

DOES NOT solve the integer promotion problem, which would allow mixed-type arithmetic. However, we believe that it is an important step in the right direction.
DOES NOT include the implementation of a BigInt type, but allows it to be implemented in the future.

Source compatibility

The proposed change is designed to be as non-breaking as possible, and it has been proven that it does not break code on concrete integer types. However, there are still a few API breaking changes in the realm of generic code:

Integer protocols in Swift up to and including version 3 were not particularly useful for generic programming, but were rather a means of sharing implementation between conforming types. Therefore we believe the amount of code that relied on these protocols is relatively small. The breakage can be further reduced by introducing proper aliases for the removed protocols with deprecation warnings.
Deprecation of the BitwiseOperations protocol. We find it hard to imagine a type that conforms to this protocol, but is not a binary integer type.
Addition of 'smart' shifts will change the behavior of existing code. It will still compile, but will be potentially less performant due to extra logic involved. In a case, where this becomes a problem, newly introduced masking shift operators can be used instead. Unfortunately, performance characteristics of the code cannot be statically checked, and thus migration cannot be provided.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

0104-improved-integers.md

0104-improved-integers.md

Protocol-oriented integers

Introduction

Motivation

Proposed solution

A note on bit shifts

Detailed design

What's new in this revision

Protocols

`Numeric`

`SignedNumeric`

`BinaryInteger`

`FixedWidthInteger`

Auxiliary protocols

DoubleWidth<T>

Extra operators

Non-mutating homogeneous shifts

Heterogeneous shifts

Heterogeneous equality and comparison

Masking arithmetic

Non-goals

Source compatibility

Files

0104-improved-integers.md

Latest commit

History

0104-improved-integers.md

File metadata and controls

Protocol-oriented integers

Introduction

Motivation

Proposed solution

A note on bit shifts

Detailed design

What's new in this revision

Protocols

Numeric

SignedNumeric

BinaryInteger

FixedWidthInteger

Auxiliary protocols

DoubleWidth<T>

Extra operators

Non-mutating homogeneous shifts

Heterogeneous shifts

Heterogeneous equality and comparison

Masking arithmetic

Non-goals

Source compatibility

`Numeric`

`SignedNumeric`

`BinaryInteger`

`FixedWidthInteger`