Fix install instructions

install.rst

@@ -4,18 +4,21 @@ Install and Configuration
 
 .. _install:
 
-Running the AppSwitch docker image will start the ``ax`` daemon and also copy
-the binary onto the host at ``/usr/bin/ax``.  No further installation is
-required.
-
+Running the AppSwitch docker image will start the ``ax`` daemon and also copy the binary onto the host at ``/usr/bin/ax``.  No further installation is required.
 
 Running the Daemon
 ==================
 
-It can be convenient to run the AppSwitch daemon in a container using
-``docker-compose``.  Here is an example docker-compose file
+The daemon can be conveniently brought up with this ``docker-compose.yaml``.  Most common configuration options are included and explained in the file.  Of course you can just run the daemon from the command line if you prefer but then you will need to pass all configuration options on the command line.
 ::
 
+    #
+    # docker-compose file AppSwitch Daemon
+    #
+    # Bring up with:
+    #  docker-compose up -d appswitch
+    #
+
     version: '2.3'
 
     volumes:
@@ -32,52 +35,19 @@ It can be convenient to run the AppSwitch daemon in a container using
           - /dev:/dev
           - /var/run/appswitch:/var/run/appswitch
           - appswitch_logs:/var/log
-        env_file:
-          - ${AX_CONFIG_FILE:-ax.config}
+        environment:
+          - AX_DRIVER=user # Syscall forwarding driver
+          - AX_NODE_INTERFACE= # Node interface to use by daemon.  Accepts IP address or interface name, eg eth0
+          - AX_NEIGHBORS= # List (csv) of IP addresses of cluster neighbors
+          - AX_CLUSTER= # Cluster name.  Required if cluster is part of a federation
+          - AX_FEDERATION_GATEWAY_IP= # IP address or `interface` name for federation connectivity
+          - AX_FEDERATION_GATEWAY_NEIGHBORS= # List (`csv`) of IP addresses of federation neighbors (other gateway nodes)
+          - AX_OPTS=--clean # Remove any saved state from previous sessions
 
-      test:
-        image: python:alpine
-        entrypoint: /usr/bin/ax run --name test
-        command: python -m http.server
-        privileged: true
-        networks: []
-        volumes:
-          - /usr/bin:/usr/bin
-          - /var/run/appswitch:/var/run/appswitch
-        depends_on:
-          - appswitch
 
-
-As indicated in this docker-compose file the AppSwitch daemon can be
-passed a config file by either setting an environment variable
-``AX_CONFIG_FILE`` or placing the configuration options in a file called
-``ax.config`` in the same directory as the docker-compose file above.
-
-(You only need the ``/dev`` volume if you are using the kernel driver.)
-
-The configuration file consists of environment variable definitions.
+The daemon can be brought up by running:
 ::
 
-    # AppSwitch configuration file template.
-    #
-    #  Copy to ax.config or set AX_CONFIG_FILE within your environment.
-
-    # Syscall forwarding driver
-    AX_DRIVER=user
-
-    # Cluster config options.
-    AX_NODE_INTERFACE=
-    AX_NEIGHBORS=
-
-    # Federation config options.
-    AX_CLUSTER=
-    AX_FEDERATION_GATEWAY_IP=
-    AX_FEDERATION_GATEWAY_NEIGHBORS=
-
-    # Additional options
-    # APPSWITCH_OPTS=--clean --dns-domain=local.appswitch
-    APPSWITCH_OPTS=--clean
+    docker-compose up -d appswitch
 
 
-Of course you can just run the daemon from the command line if you prefer
-but then you will need to pass all configuration options on the command line.