WiFi101_SD_OTA.ino

/*

 This example connects to an WPA encrypted WiFi network.
 Then it prints the MAC address of the WiFi shield,
 the IP address obtained, and other network details.
 It then polls for sketch updates over WiFi. Sketches
 can be updated by selecting a network port from within
 the Arduino IDE: Tools -> Port -> Network Ports ...

 Circuit:
 * WiFi shield attached
 * SD shield attached

 created 13 July 2010
 by dlf (Metodo2 srl)
 modified 31 May 2012
 by Tom Igoe
 modified 16 January 2017
 by Sandeep Mistry
 */
 
#include <SPI.h>
#include <SD.h>
#include <WiFi101.h>
#include <WiFi101OTA.h>
#include <SDU.h>

#include "arduino_secrets.h" 
///////please enter your sensitive data in the Secret tab/arduino_secrets.h
/////// WiFi Settings ///////
char ssid[] = SECRET_SSID;      // your network SSID (name)
char pass[] = SECRET_PASS;   // your network password

int status = WL_IDLE_STATUS;

void setup() {
  //Initialize serial:
  Serial.begin(9600);

  // setup SD card
  Serial.print("Initializing SD card...");
  if (!SD.begin(SDCARD_SS_PIN)) {
    Serial.println("initialization failed!");
    // don't continue:
    while (true);
  }
  Serial.println("initialization done.");

  // check for the presence of the shield:
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("WiFi shield not present");
    // don't continue:
    while (true);
  }

  // attempt to connect to WiFi network:
  while ( status != WL_CONNECTED) {
    Serial.print("Attempting to connect to SSID: ");
    Serial.println(ssid);
    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
    status = WiFi.begin(ssid, pass);
  }

  // start the WiFi OTA library with SD based storage
  WiFiOTA.begin("Arduino", "password", SDStorage);

  // you're connected now, so print out the status:
  printWifiStatus();
}

void loop() {
  // check for WiFi OTA updates
  WiFiOTA.poll();

  // add your normal loop code below ...
}

void printWifiStatus() {
  // print the SSID of the network you're attached to:
  Serial.print("SSID: ");
  Serial.println(WiFi.SSID());

  // print your WiFi shield's IP address:
  IPAddress ip = WiFi.localIP();
  Serial.print("IP Address: ");
  Serial.println(ip);

  // print the received signal strength:
  long rssi = WiFi.RSSI();
  Serial.print("signal strength (RSSI):");
  Serial.print(rssi);
  Serial.println(" dBm");
}