Replies: 13 comments 16 replies
-
|
Hi there, did you ever figure this out? I’m encountering a very similar issue with my Fuji PXG4 PID and Artisan. The Fuji displays roughly 50% of the slider SV. Thanks! |
Beta Was this translation helpful? Give feedback.
-
|
Sorry but there were so many settings that I tried before it worked. It was a while back but I did find one eventually . Channel 1 PID (if you are using PID 1) Try 60 to 999 from 100. SV upper limit. I'm not sure. |
Beta Was this translation helpful? Give feedback.
-
|
Great, thank you for the reply, much appreciated! Just to clarify: what do you mean by "Try 60 to 999 from 100" ?
Thank you! |
Beta Was this translation helpful? Give feedback.
-
|
In the fuji manual, on the left hand side each setting has a number in the
parameter column. Page 8. Line 60 SVH upper limit Ch1 PID control
parameters.
https://www.instrumart.com/assets/PXG4_Short_Form_Manual.pdf
…On Thu, Apr 18, 2024 at 2:48 PM MNS19 ***@***.***> wrote:
Great, thank you for the reply, much appreciated!
Just to clarify: what do you mean by "Try 60 to 999 from 100" ?
- do you mean try inputting anything from 60-999 into the "SV upper
limit" field in artisan?
Thank you!
—
Reply to this email directly, view it on GitHub
<#1098 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A36HWNYOHPDZA3MTS4RYOTLY6AWQ5AVCNFSM6AAAAAAUYIZENOVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TCNJZGUZTO>
.
You are receiving this because you authored the thread.Message ID:
<artisan-roaster-scope/artisan/repo-discussions/1098/comments/9159537@
github.com>
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
|
Beta Was this translation helpful? Give feedback.
-
|
Excellent, thank you very much! I'll give it a go 👍 |
Beta Was this translation helpful? Give feedback.
-
|
Let me know if that worked.
Good luck
…On Thu, Apr 18, 2024 at 3:29 PM MNS19 ***@***.***> wrote:
Excellent, thank you very much! I'll give it a go 👍
—
Reply to this email directly, view it on GitHub
<#1098 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A36HWN2PEWBSCQMFM7LXCATY6A3NLAVCNFSM6AAAAAAUYIZENOVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TCNJZHAYTE>
.
You are receiving this because you authored the thread.Message ID:
<artisan-roaster-scope/artisan/repo-discussions/1098/comments/9159812@
github.com>
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
|
Beta Was this translation helpful? Give feedback.
-
|
Absolutely, will do |
Beta Was this translation helpful? Give feedback.
-
|
TN5A2227b-E_tfjretsyli.pdf |
Beta Was this translation helpful? Give feedback.
-
|
Ah! Excellent, thanks for clarifying! really appreciate that.
|
Beta Was this translation helpful? Give feedback.
-
|
Not sure if we are talking the same thing. The number 60 corresponds to the
Fuji setup not Artisan. The first document I sent shows you how to access
the setup menu on the Fuji.
My register settings are different from yours in Artisan. I have attached
mine for you to see.
…On Fri, Apr 19, 2024 at 1:40 PM MNS19 ***@***.***> wrote:
Ah! Excellent, thanks for clarifying! really appreciate that.
Im going to try it out tonight. Just so that I am clear - do you remember
if you input the resulting decimal number (32) into artisan under which
register box below?
ports.config.artisan.jpg (view on web)
<https://github.com/artisan-roaster-scope/artisan/assets/102933824/34f473e3-fbd5-4c4b-8cd1-68896946596d>
—
Reply to this email directly, view it on GitHub
<#1098 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A36HWN2NFXQT5IN4QAVUGMDY6FXKLAVCNFSM6AAAAAAUYIZENOVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TCNZQGM3TQ>
.
You are receiving this because you authored the thread.Message ID:
<artisan-roaster-scope/artisan/repo-discussions/1098/comments/9170378@
github.com>
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
|
Beta Was this translation helpful? Give feedback.
-
|
Ah yes, I see what you're saying. |
Beta Was this translation helpful? Give feedback.
-
|
[image: image.png]
I think I set my SVH to 999.
…On Fri, Apr 19, 2024 at 3:55 PM MNS19 ***@***.***> wrote:
Ah yes, I see what you're saying.
When i access that menu on the Fuji my SVH is 499 (ie maximum) but
changing that value (even to 0) doesn't seem to affect the SV display at
all.
Thanks for the screenshot - maybe it didn't attach? Curious to take a look!
—
Reply to this email directly, view it on GitHub
<#1098 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A36HWN26UXI5XE7WYEG32CDY6GHF3AVCNFSM6AAAAAAUYIZENOVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TCNZRGIZTO>
.
You are receiving this because you authored the thread.Message ID:
<artisan-roaster-scope/artisan/repo-discussions/1098/comments/9171237@
github.com>
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
|
Beta Was this translation helpful? Give feedback.
-
|
[image: image.png]
Another thing maybe to check is your duty % in control (Artisan)
On Fri, Apr 19, 2024 at 4:10 PM Durango Coffee Company <
***@***.***> wrote:
… [image: image.png]
I think I set my SVH to 999.
On Fri, Apr 19, 2024 at 3:55 PM MNS19 ***@***.***> wrote:
> Ah yes, I see what you're saying.
> When i access that menu on the Fuji my SVH is 499 (ie maximum) but
> changing that value (even to 0) doesn't seem to affect the SV display at
> all.
> Thanks for the screenshot - maybe it didn't attach? Curious to take a
> look!
>
> —
> Reply to this email directly, view it on GitHub
> <#1098 (reply in thread)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/A36HWN26UXI5XE7WYEG32CDY6GHF3AVCNFSM6AAAAAAUYIZENOVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TCNZRGIZTO>
> .
> You are receiving this because you authored the thread.Message ID:
> <artisan-roaster-scope/artisan/repo-discussions/1098/comments/9171237@
> github.com>
>
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
|
Beta Was this translation helpful? Give feedback.
-
|
I'll double check the duty also, cheers! |
Beta Was this translation helpful? Give feedback.
-
|
|
Beta Was this translation helpful? Give feedback.
-
|
Decode ulnt16 |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
|
Thanks! Yes, Nico's blog is the exact tutorial I have been following. He also very kindly helped me out via email and everything is working as per his instructions except for this final piece of the puzzle. I do notice when I choose the PID button (rather than meter: modbus) under device assignment then the Fuji displays the exact same SV as the Artisan slider and all seems well, BUT it follows the background curve of ET rather than BT (the point of Nico's tutorial) It could just be me missing something very basic of course. |
Beta Was this translation helpful? Give feedback.
-
|
sint 16 for me. I'll try to post them through git hub.
…On Fri, Apr 19, 2024 at 5:13 PM Terracotta-6 ***@***.***> wrote:
Decode ulnt16
—
Reply to this email directly, view it on GitHub
<#1098 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A36HWN4FPUZD4JPXXOQFIILY6GQI3AVCNFSM6AAAAAAUYIZENOVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM4TCNZRGUYDK>
.
You are receiving this because you authored the thread.Message ID:
<artisan-roaster-scope/artisan/repo-discussions/1098/comments/9171505@
github.com>
--
Durango Coffee Company
DurangoCoffee.com
970-385-0276
|
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
Which Artisan version are you using here? The MODBUS PID dialog should look different now then in your screenshot. To me it seems that your SV register number is wrong. According to the PXF modbus register map manual SV1 relative address is 00F0 in hex which translates to 240. To this, as noted in the same manual, there is an offset of 2000 to be added resulting in the 2240. |
Beta Was this translation helpful? Give feedback.
-
|
Hi Marko , thank you for chiming in on this. I believe the settings in the screenshot above are working for the user (@Dgocof) who's been kindly helping me troubleshoot on this thread. |
Beta Was this translation helpful? Give feedback.
-
|
Yes I followed most of those settings except the D in the PID were incorrect on big loose. |
Beta Was this translation helpful? Give feedback.
-
|
artisan san modbus & Parameter loader softwarerameter loader software makes it easy to verify that register values are correct |
Beta Was this translation helpful? Give feedback.
-
Beta Was this translation helpful? Give feedback.
-
Thank you for chiming in. Appreciate it |
Beta Was this translation helpful? Give feedback.
-
|
Thanks all, it looks to be working now! The PXG4 requires an offset of 1000. So instead of 240 register 1240 works. Thanks @MAKOMO for pointing that possibility out & thanks @Dgocof for your assistance. Much appreciated. I'll be testing out properly tomorrow and will confirm but as of now the Fuji SV is in sync with Artisans SV slider and following the BT background curve nicely. Cheers all! |
Beta Was this translation helpful? Give feedback.
-
|
Well, the title of this discussion talks about PXF.... |
Beta Was this translation helpful? Give feedback.
-
|
That's true, thanks for pointing it out - looks like misread the title initially when i posted a reply. I thought it said pxg. |
Beta Was this translation helpful? Give feedback.
-
Does anyone have a suggestion as to why my SV slider would be different than the SV on the Fuji display. As you can see the further I go up the more the value is off. I can post screen shots if you need to see my setup. Temperatures are more or less the Fuji display temp rather than my SV. Therefore when I try to follow a back round BT the SV will follow the BT but the actual temperature is looking like it is the lower setpoint on the Fuji rather than the back round BT
When my
SV slider is set to: ---- My Fuji SV says:
267 - ----------------- 224
419 - ----------------- 333
500 - --------------- - 391
Beta Was this translation helpful? Give feedback.
All reactions