info.yaml

--- 
# TinyTapeout project information
project:
  wokwi_id:    0        # If using wokwi, set this to your project's ID
  source_files:        # If using an HDL, set wokwi_id as 0 and uncomment and list your source files here
    - verilog/rtl/beepboop.v
  top_module:  "beepboop"      # put the name of your top module here, make it unique by prepending your github username

# As everyone will have access to all designs, try to make it easy for someone new to your design to know what
# it does and how to operate it.
#
# Here is an example: https://github.com/mattvenn/tinytapeout_m_segments/blob/main/info.yaml
#
# This info will be automatically collected and used to make a datasheet for the chip.
documentation: 
  author:       "Anish Singhani"      # Your name
  discord:      ""      # Your discord handle - make sure to include the # part as well
  title:        "Beep Boop Traffic Light Controller"      # Project title
  description:  "Sequencer for a traffic light with a walk button, with timings tuned to match the iconic 'beep boop' streetlight formerly installed in front of Carnegie Mellon University"      # Short description of what your project does
  how_it_works: "Press the walk button and the traffic light will turn red, then the walk signal and 'beep boop' will begin"      # Longer description of how the project works
  how_to_test:  "See inputs and outputs"      # Instructions on how someone could test your project, include things like what buttons do what and how to set the clock if needed
  external_hw:  "LEDs, noisemaker, button"      # Describe any external hardware needed
  language:     "SystemVerilog" # other examples include Verilog, Amaranth, VHDL, etc
  doc_link:     ""      # URL to longer form documentation, eg the README.md in your repository
  clock_hz:     0       # Clock frequency in Hz (if required) we are expecting max clock frequency to be ~6khz. Provided on input 0.
  picture:      ""      # relative path to a picture in your repository

  inputs:               # a description of what the inputs do
    - clock
    - reset
    - walk button
    - none
    - none
    - none
    - none
    - none
  outputs:
    - red
    - yellow
    - green
    - walk
    - no walk
    - noisemaker
    - none
    - none