Image with ssh installer

flash_sdcard_m2z_ssh.sh

@@ -0,0 +1,86 @@
+#!/bin/bash
+
+function pt_error()
+{
+    echo -e "\033[1;31mERROR: $*\033[0m"
+}
+
+function pt_warn()
+{
+    echo -e "\033[1;31mWARN: $*\033[0m"
+}
+
+function pt_info()
+{
+    echo -e "\033[1;32mINFO: $*\033[0m"
+}
+
+function pt_ok()
+{
+    echo -e "\033[1;33mOK: $*\033[0m"
+}
+
+mmc="mmcblk"
+out="$1"
+
+if [ -z "$out" ]; then
+    pt_error "Usage: $0 <SD card> (SD CARD: /dev/sdX  where X is your sd card letter or /dev/mmcblkY  where Y your device number)"
+    exit 1
+fi
+
+if [ $UID -ne 0 ]
+    then
+    pt_error "Please run as root."
+    exit
+fi
+
+if [[ $out == *$mmc* ]]; 
+then
+part="p"
+else
+part=""
+fi
+
+
+pt_info "Umounting $out, please wait..."
+sync
+umount ${out}* >/dev/null 2>&1
+sleep 1
+sync
+
+set -e
+
+pt_info "Reading partition..."
+sudo partprobe
+sleep 2
+sync
+sudo partprobe ${out}
+sleep 2
+
+set -e
+pt_warn "Flashing $out...."
+dd if=./bootloader_m2z.bin conv=notrunc bs=1k seek=8 of=$out
+
+pt_info "Decompressing rootfs to $out$part"2", please wait... (takes some time)"
+mkdir -p erootfs
+sudo partprobe ${out}
+sleep 2
+sync
+sudo mount $out$part"2" erootfs
+tar -xvpzf rootfs_m2z_ssh.tar.gz -C ./erootfs --numeric-ow
+sync
+sudo umount erootfs
+rm -fR erootfs
+sync
+set +e
+mkdir eboot
+sudo mount $out$part"1" eboot
+tar -xvpzf boot_m2z.tar.gz -C ./eboot  --numeric-ow
+sync
+sudo umount eboot
+rm -fR eboot
+sync
+pt_ok "Finished flashing $out!"
+pt_ok "You can remove the SD card and boot the board with this new OS image. Enjoy!"
+
+