FunkLoad CHANGES

author: Benoit Delbosc
address: bdelbosc _at nuxeo.com
abstract: This document describes changes between FunkLoad versions.

Table of Contents

FunkLoad GIT master

git: https://github.com/nuxeo/FunkLoad
Target: 1.17.0

New Features

Add a discover mode to the bench runner, so fl-run-bench can be invoked without specifying the particular test case. This implementation attempts to behave like unittest's 'discover' argument, and there is even a similar --failfast option. (Shandy (Andy) Brown)
Support https proxy (http proxy was already supported)
Add a midCycle hook to execute an action in the middle of a cycle
Add -L options to fl-record to enable tcpwatch forwarded mode which is usefull if you have an http_proxy to pass.
Add --quiet option to fl-build-report to remove warning in rst to html convertion
GH-71: zeromq-based publisher that will let each node publish in realtime the tests results (Tarek Ziade)
GH-68: Use lightweight threads (greenlets) if available. (Tarek Ziade)
Added one more RPS chart in Section 5, where the X-axis represents time(in second) and the Y-axis represents RPS. (Seong-Kook Shin)
Added support for providing the test configuration file with --config (Juha Mustonen)
Display the description in the URL when rendering the page in Firefox (-V option)
GH-41: Allow fl-run-bench to take modules in addition to filenames (joeshwaw):
```
fl-run-bench project.submodule.loadtests MyTestCase.test_something
```
Support for gzip compression, you need to add the standard header:
```
self.setHeader('Accept-encoding', 'gzip')
response = self.get(...)
```
Then the response.body will be uncompressed when needed.

Experimental comet request support, handle stream request in a separate thread, the server input is send to a consumer method:

# async request
thread = self.comet(server_url + "/comet?t=1234&c=1",
                    self.consumer, description="Comet connection")
# do some requests
...
# stop comet request
self.stop_consumer = True
thread.join()

The consumer get the server input character by character and can stop the the connection by returning 0 value:
def consumer(self, string):
    trace(string)
    if self.stop_consumer:
        self.logd('Stop consumer')
        return 0

Ability to configure multiple benchers per server in distribute mode (Dylan Jay)
Ability to configure multiple monitors per server (useful if you have to use ssh tunnels instead of read hostnames). (Dylan Jay)

Bug Fixes

GH-69: Cleanly abort on SIGTERM (Tarek Ziade)
GH-32: Fix Funkload WF_fetch patch to handle cookies correctly. Submitted by jorgebastida.
GH-33: Cookies with a leading '.' in the domain are being ignored. Submitted by jorgebastida.
GH-50: Fix monitoring to support kernel 3.0.

FunkLoad 1.16.1

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.16.1.tar.gz
github: https://github.com/nuxeo/FunkLoad/tree/1.16.1
Released date: 2011-07-28

Bug Fixes

GH-2[345]: Fixing distributed mode regression on 1.6.0

FunkLoad 1.16.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.16.0.tar.gz
github: https://github.com/nuxeo/FunkLoad/tree/1.16.0
Released date: 2011-07-21

New Features

New monitoring plugins contribution from Krzysztof A. Adamski. You can extend the monitoring by adding new plugins checkout the Munin and Nagios examples.

Extends HTTP methods with HEAD and OPTIONS, enable to send any methods using the new method api, adding PROPFIND DAV exemple :

# requests for options
self.options(server_url, description="options")
self.propfind(server_url + '/dav/foo', depth=1, description="propfind")
# put a lock using the new method api
data = Data('text/xml', """<?xml version="1.0" encoding="utf-8"?>
<D:lockinfo xmlns:D="DAV:">
<D:lockscope><D:exclusive/></D:lockscope>
<D:locktype><D:write/></D:locktype>
<D:owner>
<D:href>http://www.webdav.org/webdav_fs/</D:href>
</D:owner>
</D:lockinfo>""")
self.method("LOCK", server_url + "/somedocpath", params=data, description="lock")

GH-9: New options for distributed mode: you can specify the Python binary to use with --distribute-python=PYTHON_BIN option and additional packages to install on slaves with the --distributed-packages=DISTRIBUTED_PACKAGES option. Contribution from Adrew McFague.
GH-9: Added the ability to monitor hosts from the central host, The monitoring will also retroactively match up the concurrent users for graphing purposes. Contribution from Adrew McFague.
GH-5: fl-record now checks for tcpwatch command in addition to tcpwatch.py and tcpwatch-httpproxy.
GH-6: Filter out .swfs when building funkload tests with fl-record.
GH-10: Support of python2.7.
GH-15: Exposed the load_auto_links parameter to the get/put/post/method methods so that the option to not parse the payload is available when writing a test. Provided by Ali-Akber Saifee.

Bug fixes

Fix org-mode output for Org 7.5, adding missing monitoring section.
GH-14: Fix report creation when having error message with non-us characters. Patch from Krzysztof A. Adamski.
GH-11: Handling of deleted cookies
GH-7: data and demo directory missing
GH-8: funkload 1.15.0 package doesn't include ez_setup.py

FunkLoad 1.15.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.15.0.tar.gz
github: https://github.com/nuxeo/FunkLoad/tree/1.15.0
Released date: 2011-03-11

New features

Now supporting emacs Org-mode text format as report output. This enable to edit a report as plain text and to produce professional PDF reports througth the Org-mode LaTeX export.

Here is an example of a PDF and an Org-mode report.

You need to build the HTML report first:

fl-build-report --html funkload.xml
Creating html report: ...done: 
/tmp/test_foo-20110304T160328/index.html
# then create the org file
fl-build-report --org funkload.xml > /tmp/test_foo-20110304T160328/index.org
emacs /tmp/test_foo-20110304T160328/index.org
# then export as PDF C-c C-e d 
# refer to the org-mode site for latex exports requirements

New trend report to display evolution of performances over time. Just use the --trend option of the fl-build-report command.
The credential server can serve a sequence. Using xmlrpc_get_seq threads can share a sequence:
```
from funkload.utils import xmlrpc_get_seq
...
seq = xmlrpc_get_seq()
```
Source migrated from svn to git, hosted in gigthub https://github.com/nuxeo/FunkLoad
Bug tracker moving to github: https://github.com/nuxeo/FunkLoad/issues
New site and documentation using sphinx: http://funkload.nuxeo.org/
CPSTestCase and ZopeTestCase have been moved to the demo folder.
Removing deprecated gdchart support, now relying only on gnuplot. Note that a mathplotlib support is on the TODO list.

Bug fixes

Fix #3: FunkLoad Failures Fail on Python 2.7 https://github.com/nuxeo/FunkLoad/issues#issue/3
Do not block on read content when content-length is null, patch submited by Bertrand Yvain.
Fix monitoring network monitoring charts.

FunkLoad 1.14.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.14.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.14.0
Released date: 2011-02-14

New features

Switch to Sphinx for documentation, this work is in progress, the draft can be found in http://funkload.nuxeo.org/sphinx/. Thanks to Ali-Akber Saifee.
Support of HTTP PUT and DELETE method, provided by Ali-Akber Saifee.
Distributed mode (beta), provided by Ali-Akber Saifee, visit the new FAQ http://funkload.nuxeo.org/sphinx/faq.html#how-to-run-multiple-bencher for more information.
Support of the --simple-fetch option using the configuration file. This can be useful when using benchmaster http://pypi.python.org/pypi/benchmaster. Just add simple_fetch = 1 in the bench section.
Add setUpBench and tearDownBench hooks, they are called only once per bench before and after all cycles.

Note that these hooks are called only using fl-run-bench and no fl-run-test.

This comes in addition to the existing setUpCycle and tearDownCycle hooks that are run before and after each bench cycle.
Enable to add metadata for a bench using addMetadata(kw), metadata are stored into the bench result file and are displayed on the bench configuration section.

A typical usage is to add metadata during setUpBench or tearDownBench hooks.
Handling FunkLoad todo list with an Org-mode file TODO, replacing the old trac.
Mark CPSTestCase as deprecated will be removed in 1.15.
Mark GDChart support as deprecated, it will be removed in 1.15.

Bug fixes

Fix: ImportError are reported as IOError using fl-run-test because FunkLoad is switching in doctest mode when ImportError occurs. Fixed by adding an explicit option to run doctest: --doctest.
Fix: xmlrpc_get_credential(host, port) and xmlrpc_list_credentials without a group parameter it raises a "TypeError: cannot marshal None unless allow_none is enabled".
Fix: 303 Redirect is handled as an HTTP/1.1 request by apache using a keep alive connection while FunkLoad is HTTP/1.0. This add a 15s (KeepAliveTimeout) overhead. Fixed by adding "Connection: close" header on 303. Thanks to Jan Kotuc.
Fixing invalid diff report if the report contains Apdex information.

FunkLoad 1.13.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.13.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.13.0
Released date: 2010-07-27

New features

Adding Apdex (Application Performance inDEX) on reporting.

The Apdex is a numerical measure of user satisfaction, it is based on three zones of application responsiveness:
- Satisfied: The user is fully productive. This represents the time value (T seconds) below which users are not impeded by application response time.
- Tolerating: The user notices performance lagging within responses greater than T, but continues the process.
- Frustrated: Performance with a response time greater than 4*T seconds is unacceptable, and users may abandon the process.
By default T is set to 1.5s this means that response time between 0 and 1.5s the user is fully productive, between 1.5 and 6s the responsivness is tolerating and above 6s the user is frustrated.

The T variable can be set using the fl-build-report option --apdex-T.

The Apdex score converts many measurements into one number on a uniform scale of 0-to-1 (0 = no users satisfied, 1 = all users satisfied).

To ease interpretation the Apdex score can be converted to a rating:
- Unacceptable represented in gray for a score between 0 and 0.5
- Poor represented in red for a score between 0.5 and 0.7
- Fair represented in yellow for a score between 0.7 and 0.85
- Good represented in green for a score between 0.85 and 0.94
- Excellent represented in blue for a score between 0.94 and 1
By looking at the Page stats in the report you can take the maximum throughput with a Good/Excellent rating as an overall performance score.

Note that this new metric can be generated with old funkload results file.

Here is a report example: http://funkload.nuxeo.org/report-example/test_seam_java6/#page-stats

Visit http://www.apdex.org/ for more information on Apdex.
The selection of the best cycle to sort slowest requests in the report is found using the product of throuthput and apdex score instead of simple maximum.

Bug fixes

The recorder now maintain the order of input elements, patch submited by Martin Aspeli
Fix unicode decode errors when merging reports when an error occurred on a page with unicode, patch submited by Martin Aspeli.

FunkLoad 1.12.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.12.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.12.0
Released date: 2010-05-26

New features

fl-build-report is now able to create a report using many result files. The goal of this feature is to create bench report for a distributed bench. To be merged the result files must have the same cycles and cycle duration.
The hostname and python version is now logged in the result file.
Try to use psyco if installed. Note that psyco works only on 32-bit system.
Miscellaneous speed improvments: removing minimal sleep time between actions, removing useless logs.
New --as-fast-as-possible or -f option to fl-run-bench to remove sleep any times between requests and test cases, this is equivalent to -m0 -M0 -t0.
New --enable-debug-server option for fl-run-bench command. This option run a debug HTTP server which exposes an interface using which parameters can be modified at run-time.

Currently supported parameters:
- http://localhost:8000/cvu?inc=<integer> to increase the number of CVUs,
- http://localhost:8000/cvu?dec=<integer> to decrease the number of CVUs,
- http://localhost:8000/getcvu returns number of CVUs.
You can load a server and be able to change the number of concurrent users during the run without pre-specifying it through 'cycles' argument, this is usefull during debugging or profiling.

This feature has been provided by Goutham Bhat.

Bug fixes

Fixed a missing semicolon in WebUnit patch, caused all cookies to be combined into one ubercookie, thanks to Gareth Davidson.
Do not generate charts when there are no data available preventing: "RuntimeError: Failed to run gnuplot cmd: ... Skipping data file with no valid points" error when building a report.
Fix report charts on OS X darwin, thanks to Ethan Winn and Arshavski Alexander.

FunkLoad 1.11.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.11.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.11.0
Released date: 2010-01-26

New features

Support https with ssl/tls by providing a private key and certificate (PEM formatted) to the new setKeyAndCertificateFile method. This feature has been provided by Kelvin Ward.
Better win support:
- Patch recorder to work on non linux os, enable TCPWATCH env variable to set the tcpwatch binary path, thanks to David Fraser.
- Patch report builder to produce gnuplot chart on win, thanks to Kelvin Ward.
Enable to view the request headers either using an api (method debugHeaders) or command line option -d --debug-level=3.
Support of WebUnit 1.3.9 (in addition of 1.3.8) this new version brings cookie max-age support.

Bug fixes

Fixing gnuplot charts when concurrent users are not in ascending order or have duplicates. (like -c 1:10:50:10:1 instead of -c 1:10:20:30)
Prevent fl-record to generate invalid python test case name.
Fix regex to check valid resources urls, it was too restrictive.
Fix cookie support, there was an extra ";" if there was only one cookie, thanks to Daniel Sward.
Fixing filename in mime encoding when uploading a file using an absolute path.

FunkLoad 1.10.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.10.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.10.0
Released date: 2009-03-23

New features

Easier installation on Debian Lenny/Ubuntu 8.10, See INSTALL.
Support setuptools console_scripts entry point for funkload scripts. Thanks to Ross Patterson.
Added a two sample buildout configurations: a minimal one that just contains what is necessary to run tests and a default one that also enables recording. Thanks to Tom Lazar.
Added a --report-directory option to fl-build-report to set report directory path.
Added a --label option to fl-run-bench which the report generator then appends to the output directory of the report. This is to make it easier to keep different bench runs apart from each other. Thanks to Tom Lazar.
Added a --pause option to fl-run-test, the test runner will wait for the ENTER key to be pressed between requests.
Added a --loop option to fl-record, this way it is easy to type a comment then hit Ctrl-C to dump the script and continue with the next action.

Bug fixes

Only attempt to retrieve syntactically valid URLs links.
Fix report generation for bench with only one cycle.
Fix differential report average percent profit chart.
Fix possible error on differential report ReStructuredText.

FunkLoad 1.9.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.9.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.9.0
Released date: 2008-11-07

New features

Switch to gnuplot 4.2 for charts generation. Gnuplot script and data are kept with the report enabling charts customization. No more gdchart charting woes.
Enhanced charts displaying more information, view a report example.
New diff report option, comparing 2 reports is a long and error prone task, fl-build-report has been enhanced to produce a differencial report. This new feature requires gnuplot.

To produce a diff report:
```
fl-build-report --diff path/to/report-reference path/to/report-challanger
```
View a diff report example.

Post method handles custom data and content type. For example to post a xmlrpc by hand

from funkload.utils import Data
...
    data = Data('text/xml', """<?xml version='1.0'?>
<methodCall>
<methodName>getStatus</methodName>
<params>
</params>
</methodCall>
""")
    self.post(server_url, data, description="Post user data")

The recorder translates properly application/xml or any content type using the new Data class (see above exemple).
New test script provided with fl-install-demo to bench the JBoss Seam Booking application.

FunkLoad 1.8.0

Package: http://pypi.python.org/packages/source/f/funkload/funkload-1.8.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.8.0/
Released date: 2008-07-28

New features

Upgrate to python-gdchart2 using libgd2 (gdchart1 is deprecated).

Bug fixes

Handle redirect code 303 and 307 like a 302.

FunkLoad 1.7.0

Package: http://funkload.nuxeo.org/funkload-1.7.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.7.0/
Released date: 2008-07-23

New features

Recorder and test take care of JSF MyFaces tokens which make FunkLoad ready to record/play Nuxeo EP or any JBoss Seam application.
Change API of listHref to be able to search on link content as well as link url. pattern parameter is renamed into url_pattern and a new content_pattern can be supply.

Bug fixes

fix: # 1838: Upload doesn't work for CherryPy.
fix: # 1834: multiple redirects not handled properly (jehiah patch).
fix: # 1837: post() is sent as GET when no params defined.
Apply patch from Dan Rahmel to fix fl-record on non posix os.

FunkLoad 1.6.2

Package: http://funkload.nuxeo.org/funkload-1.6.2.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.6.2/
Released date: 2007-04-06

Bug fixes

fix: 'Page stats' percentiles are wrong.

FunkLoad 1.6.1

Package: http://funkload.nuxeo.org/funkload-1.6.1.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.6.1/
Released date: 2007-03-09

Bug fixes

Support of python 2.5.
Fix: 1.6.0 regression invalid encoding of parameters when posting several times the same key.

FunkLoad 1.6.0

Package: http://funkload.nuxeo.org/funkload-1.6.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.6.0/
Released date: 2007-02-27

New features

Do not send cookie with deleted value, this fix trouble with Zope's CookieCrumbler and enable benching of Plone apps, Thanks to Lin.
Works with Ruby CGI, fixing webunit mimeEncode and adding Content-type header on file upload, Thanks to Bryan Helmkamp.
# 1283: Patching webunit to support http proxy by checking $http_proxy env. Thanks to Greg, (note that https proxy is not yet supported).
Adding Mirko Friedenhagen --with-percentiles option to fl-build-report to include percentiles in statistic tables and use 10%, 50% and 90% percentil instead of min, avg and max in charts. This is now the default option, use --no-percentiles for the old behaviour.
Upgrade to setuptools 0.6c3
FunkLoadTestCase.conf_getList accept a separator parameter

Bug fixes

fix: # 1279: Browser form submit encoding, default encoding for post is now application/x-www-form-urlencoded, multipart mime encoding is used only when uploading files.
Patching webunit mimeEncode method to send CRLF as describe in RFC 1945 3.6.2, patch provided by Ivan Kurmanov.
fix: response string representation url contains double /
fix: xmlrpc url contains basic auth credential in the report
fix: # 1300: easy_install failed to install docutils from sourceforge, upgrading ez_install 0.6a10

FunkLoad 1.5.0

Package: http://funkload.nuxeo.org/funkload-1.5.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.5.0/
Released date: 2006-01-31

New features

# 1284: TestCase: support of doctest

There is a new FunkLoadDocTest class that ease usage of FunkLoad from doctest:

>>> from funkload.FunkLoadDocTest import FunkLoadDocTest
>>> fl = FunkLoadDocTest()
>>> response = fl.get('http://localhost/')
>>> 'HTML' in response.body
True
>>> response
<response url="http://127.0.0.1:80//" code="200" message="OK" />

If you use python2.4, the test runner fl-run-test is able launch doctest from a plain text file or embedded in python docstring:

$ fl-run-test -v doctest_dummy.txt
Doctest: doctest_dummy.txt          Ok
-----------------------------------------------------
Ran 1 test in 0.077s
OK

And the --debug option makes doctests verbose:

$ fl-run-test -d doctest_dummy.txt
...
Trying:
    fl = FunkLoadDocTest()
Expecting nothing
ok
Trying:
    fl.get('http://localhost/')
Expecting:
    <response url="http://127.0.0.1:80//" code="200" message="OK" />
ok
Ok
----------------------------------------------------------------------
Ran 1 test in 0.051s
OK

Test runner can use a negative regex to select tests. For example if you want to launch all tests that does not ends with 'foo' :
```
fl-run-test myFile.py -e '!foo$'
```
# 1282: TestRunner: more verbosity

The new fl-run-test option --debug-level=2 will produce debug output on each link (images or css) fetched.
Improve firefox view in real time by using approriate file extention for the content type.
CPSTestCase is up to date for 3.4.0, use CPS338TestCase for a CPS 3.3.8.

Bug fixes

fix # 1278: BenchRunner: UserAgent from config file is not set

FunkLoad 1.4.1

Package: http://funkload.nuxeo.org/funkload-1.4.1.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.4.1/
Released date: 2005-12-16

Bug fixes

fix # 1201: Erroneous page stats
fix # 934: REPORT: Charts should display origin

FunkLoad 1.4.0

Package: http://funkload.nuxeo.org/funkload-1.4.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.4.0/
Released date: 2005-12-08

New features

New --loop-on-pages option for fl-run-test.

This option enable to check response time of some specific pages inside a test without changing the script, which make easy to tune a page in a complex context. Use the debug option to find the page numbers. For example:
```
fl-run-test myfile.py MyTestCase.testSomething -l 3 -n 100
```
Run MyTestCase.testSomething, reload one hundred time the page 3 without concurrency and as fast as possible. Output response time stats. You can loop on many pages using slice -l 2:4.
New --accept-invalid-links option for fl-run-test and fl-run-bench

Don't fail if css/image links are not reachable.
New --list option for fl-run-test to list the test names without running them.
# 936: TestRunner: use regexp to load test

New --regex or -e option for fl-run-test to filter test names that match a regular expression.
# 939: Browser: Provide an option to disable image and links load

New --simple-fetch option for fl-run-test and fl-run-bench.
# 937: TestRunner: Add an immediate fail option

New --stop-on-fail option for fl-run-test that stops tests on first failure or error.
# 933: Report: Add global info

Adding total number of tests, pages and requests during the bench.
CPSTestCase.listDocumentHref is renamed into cpsListDocumentHref
FunkLoadTestCase.xmlrpc_call is renamed into xmlrpc (xmlrpc_call is still working)
Some code cleaning, cheesecake index 460/560 ~82%.
New epydoc API documentation.
fl-run-test is now able to run standard unittest.TestCase.

Bug fixes

# 1183: updating ez_setup to fix broken sourceforge docutils download

FunkLoad 1.3.1

Package: http://funkload.nuxeo.org/funkload-1.3.1.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.3.1/
Released date: 2005-11-10

Bug fixes

fix # 1115: Recorder: impossible to generate test

FunkLoad 1.3.0

Package: http://funkload.nuxeo.org/funkload-1.3.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.3.0/
Released date: 2005-11-08

New features

# 944: Recorder: replace TestMaker recorder.

Providing a fl-record command that drive a TCPWatch proxy. See INSTALL to setup TCPWatch.
# 1041: Browser: implement an addHeader method.

FunkLoadTestCase provides new methods setUserAgent, addHeader and clearHeaders.
# 1088: TestRunner / BenchRunner: use compatible command line option
- All fl-* executables have a --version option to display the FunkLoad version.
- All fl-run-* are now in color mode by default. Use --no-color options for monochrome output. You need to remove the -c option for fl-run-test and -C for fl-run-bench in your scripts.
- Changing fl-run-bench short option -d into -D for duration, keeping -d for debug mode.
- Removing fl-run-test short option -D to not conflict with new -D option of fl-run-bench, you now have to use the long format --dump-directory.

Bug fixes

fix # 935: Browser: doesn't handle Referer header.

FunkLoad 1.2.0

Package: http://funkload.nuxeo.org/funkload-1.2.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.2.0/
Released date: 2005-10-18

New features

Credential and Monitor services have been refactored they are now true unix daemon service, controllers are now in pure python (no more bash scripts).
Switching from distutils to setuptools using EasyInstall, installing FunkLoad is now just a question of sudo easy_install funkload.
Moving demo examples into the egg, just type fl-install-demo to extract the demo folder

Bug fixes

fix # 1027 Report: min and max page response time are wrong.
fix # 1017 Report: request charts is alway the same.
fix # 1022 Monitor: no cpu usage monitoring on linux 2.4.x
fix # 1000 easy_install failed to install funkload.
fix # 1009 Report: remove error scale in graph if there is no errors.
fix # 1008 Report: missing legend.

FunkLoad 1.1.0

Package: http://funkload.nuxeo.org/funkload-1.1.0.tar.gz
Svn: http://svn.nuxeo.org/pub/funkload/tags/1.1.0/
Released date: 2005-10-07

New features

FunkLoadTestCase: adding exists method.
FunkLoadTestCase: support XML RPC test/bench using xmlrpc_call.
FunkLoadTestCase: adding a regex pattern to listHref.
FunkLoadTestCase: new setUpCycle and tearDownCycle methods to configure bench between cycle.
FunkLoadTestCase: Patching webunit to send a User-Agent header.
# 950 Report: display failure and error (first part).
# 948 Report: provide the 5 slowest requests.
# 941 Demo: provide usefull examples.
CPSTestCase: add cpsVerifyUser, cpsVerifyGroup, cpsSetLocalRole, cpsCreateSite, cpsCreateSection.
ZopeTestCase: adding zopeRestartZope, zopeFlushCache, zopePackZodb, zopeAddExternalMethod.
Lipsum: handle iso 8859-15 vocabulary.
Lipsum: adding random phone number and address generator.
credentiald: add methods listCredentials and listGroups.
Moving TODO and bugs to trac: http://svn.nuxeo.org/trac/pub/report/12
Improve documentation.

Bug fixes

# 971 Report: the network load monitor should record network speed instead of cumulative downlaod
XML result file is resetted at beginning of a test or bench.
Fix threadframe module requirement.
No more python 2.3 dependency for scripts fl-*-ctl

FunkLoad 1.0.0

Location: http://funkload.nuxeo.org/funkload-1.0.0.tar.gz
Released date: 2005-09-01

First public release.

More information on the FunkLoad site.

Files

CHANGES.txt

Latest commit

History

CHANGES.txt

File metadata and controls

FunkLoad CHANGES

FunkLoad GIT master

New Features

Bug Fixes

FunkLoad 1.16.1

Bug Fixes

FunkLoad 1.16.0

New Features

Bug fixes

FunkLoad 1.15.0

New features

Bug fixes

FunkLoad 1.14.0

New features

Bug fixes

FunkLoad 1.13.0

New features

Bug fixes

FunkLoad 1.12.0

New features

Bug fixes

FunkLoad 1.11.0

New features

Bug fixes

FunkLoad 1.10.0

New features

Bug fixes

FunkLoad 1.9.0

New features

FunkLoad 1.8.0

New features

Bug fixes

FunkLoad 1.7.0

New features

Bug fixes

FunkLoad 1.6.2

Bug fixes

FunkLoad 1.6.1

Bug fixes

FunkLoad 1.6.0

New features

Bug fixes

FunkLoad 1.5.0

New features

Bug fixes

FunkLoad 1.4.1

Bug fixes

FunkLoad 1.4.0

New features

Bug fixes

FunkLoad 1.3.1

Bug fixes

FunkLoad 1.3.0

New features

Bug fixes

FunkLoad 1.2.0

New features

Bug fixes

FunkLoad 1.1.0

New features

Bug fixes

FunkLoad 1.0.0