Skip to content

awbrown90/SFND_Lidar_Obstacle_Detection

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 
 
 

Repository files navigation

Sensor Fusion Self-Driving Car Course

Welcome to the Sensor Fusion course for self-driving cars.

In this course we will be talking about sensor fusion, whch is the process of taking data from multiple sensors and combining it to give us a better understanding of the world around us. we will mostly be focusing on two sensors, lidar, and radar. By the end we will be fusing the data from these two sensors to track multiple cars on the road, estimating their positions and speed.

Lidar sensing gives us high resolution data by sending out thousands of laser signals. These lasers bounce off objects, returning to the sensor where we can then determine how far away objects are by timing how long it takes for the signal to return. Also we can tell a little bit about the object that was hit by measuring the intesity of the returned signal. Each laser ray is in the infrared spectrum, and is sent out at many different angles, usually in a 360 degree range. While lidar sensors gives us very high accurate models for the world around us in 3D, they are currently very expensive, upwards of $60,000 for a standard unit.

Radar data is typically very sparse and in a limited range, however it can directly tell us how fast an object is moving in a certain direction. This ability makes radars a very pratical sensor for doing things like cruise control where its important to know how fast the car infront of you is traveling. Radar sensors are also very affordable and common now of days in newer cars.

Sensor Fusion by combing lidar's high resoultion imaging with radar's ability to measure velocity of objects we can get a better understanding of the sorrounding environment than we could using one of the sensors alone.

Installation

Linux Ubuntu 16

Install PCL, C++

The link here is very helpful, https://larrylisky.com/2014/03/03/installing-pcl-on-ubuntu/

A few updates to the instructions above were needed.

  • libvtk needed to be updated to libvtk6-dev instead of (libvtk5-dev). The linker was having trouble locating libvtk5-dev while building, but this might not be a problem for everyone.

  • BUILD_visualization needed to be manually turned on, this link shows you how to do that, http://www.pointclouds.org/documentation/tutorials/building_pcl.php

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 94.4%
  • CMake 4.6%
  • C 1.0%