Steele PDB & KISS OSD & Helix BF32 V2.5 & BF32 for minimOSD

@awolf78 awolf78 released this Dec 9, 2017 · 2 commits to master since this release

New features/bugfixes:

  • Crossfire RSSI support with custom RSSI (please read Wiki RSSI section!)
  • Arming status (and turtle mode warning)
  • More statistics: Throttle dependent amperage average and maximum
  • vTx knob control display (Not for Helix or Mercury)
  • RC Split support for minimOSD ONLY. Connect RC Split to current pin.
  • Helix and Mercury Betaflight support

The firmware package also includes the config tool, which lets you add/change features included in my OSD FW. The KISS OSD Config Tool V2.2 video in the first post of this rc-groups thread will give you a good overview of what can be changed/added:
https://www.rcgroups.com/forums/showthread.php?2806289-KISS-OSD-Firmware-new-versions-posted-here

The other videos in the first post explain some of the features included in the OSD FW. Since they are from an older version, some features are not included, but you can find explanations in my wiki:
https://github.com/awolf78/KISS_OSD/wiki

Which version should you use?
SteelePDB: the SteelePDB V2.5
minimOSD, PiggyOSD, microOSD (etc.) on KISS FC (V1 or V2): KISS OSD V2.5
minimOSD, PiggyOSD, microOSD (etc.) on BF FC (F3 or better): BF32 V2.5
ImpulseRC Helix with a Helix vTx: Helix BF32 V2.5
ImpulseRC Mercury: Helix BF32 V2.5

kiss_pdb

Steele PDB v2.4RC4.3 & KISS OSD v2.4RC4.3

@awolf78 awolf78 released this Jul 28, 2017 · 20 commits to master since this release

This release contains some bugfixes from the original release that came with the first batch of SteelePDBs:

  • fixes Double line issue - mostly when using PAL cameras or Runcam cameras
  • Backwards compatibility: If a KISS FC FW version older than 1.2 was installed the OSD would not work. Please note that the menu is disabled if you are using an older KISS FC version, so you will not be able to change PIDs, Rates, vTx channels etc. But you can still see the Voltage, Amps and Mah and you can configure the battery warning by flashing the config tool.

The firmware package also includes the config tool, which lets you add/change features included in my OSD FW. The KISS OSD Config Tool V2.2 video in the first post of this rc-groups thread will give you a good overview of what can be changed/added:
https://www.rcgroups.com/forums/showthread.php?2806289-KISS-OSD-Firmware-new-versions-posted-here

The other videos in the first post explain some of the features included in the OSD FW. Since they are from an older version, some features are not included, but you can find explanations in my wiki:
https://github.com/awolf78/KISS_OSD/wiki

Which version should you use?
If you have a SteelePDB: the SteelePDB V2.4RC4.3
If you use a minimOSD, PiggyOSD, microOSD (etc.): KISS OSD V2.4RC4.3
if you have a Helix vTx and run KISS: Helix vTx KISS OSD V2.4RC4.3

kiss_pdb

KISS OSD v2.4 beta

@awolf78 awolf78 released this May 29, 2017 · 35 commits to master since this release

New features:

  • RSSI (FrSky users only) - please read wiki
  • vTx power displayed when knob is configured in KISS GUI
  • Fixed OSD item positions option - in case you are short of radio channels
  • V1.3 compatibility

ATTENTION v2.2 (or higher) users: Your settings will not be lost! KISS CONFIG TOOL V2.4 will import your settings. You must update the font though!

Note: With certain PAL cameras it can happen that you are not able to move the OSD items in the config tool properly. In that case got to "RESET" and do a "RESTORE DEFAULTS".

Download the appropriate version and unpack entire contents in a folder.
Read the Wiki for installation instructions:
https://github.com/awolf78/KISS_OSD/wiki

The Impulse RC version is only for this board:
http://impulserc.com/helix-video-transmitter-board

All others ((micro) minimOSD etc.) download the "normal" version.

This is a beta version - please report any bugs in the issues section or in my rc-groups thread:
https://github.com/awolf78/KISS_OSD/issues
https://www.rcgroups.com/forums/showthread.php?2806289-KISS-OSD-Firmware-new-versions-posted-here

If you like the OSD FW, please consider donating:
www.paypal.me/awolf78

KISS OSD V2.3.1

@awolf78 awolf78 released this Apr 9, 2017 · 45 commits to master since this release

ATTENTION v2.2 (or higher) users: Your settings will not be lost! KISS CONFIG TOOL V2.3.1 will import your settings. You must update the font though, otherwise no crosshair!

Note: With certain PAL cameras it can happen that you are not able to move the OSD items in the config tool properly. In that case got to "RESET" and do a "RESTORE DEFAULTS".

Download the appropriate version and unpack entire contents in a folder.
Read the Wiki for installation instructions:
https://github.com/awolf78/KISS_OSD/wiki

The Impulse RC version is only for this board:
http://impulserc.com/helix-video-transmitter-board

All others ((micro) minimOSD etc.) download the "normal" version.

Please visit my rc-groups thread to view the latest changes (always updated in first post):
https://www.rcgroups.com/forums/showthread.php?2806289-KISS-OSD-Firmware-new-versions-posted-here

If you like the OSD FW, please consider donating:
www.paypal.me/awolf78

KISS OSD v.2.3

@awolf78 awolf78 released this Mar 29, 2017 · 50 commits to master since this release

ATTENTION v2.2 users: Your settings will not be lost!. KISS CONFIG TOOL V2.3 will import your settings. You must update the font though! Make your choice on the Wattmeter, but then you can move on to KISS OSD V2.3.

Download the appropriate version and unpack entire contents in a folder.
Read the Wiki for installation instructions:
https://github.com/awolf78/KISS_OSD/wiki

The Impulse RC version is only for this board:
http://impulserc.com/helix-video-transmitter-board

All others ((micro) minimOSD etc.) download the "normal" version.

Please visit my rc-groups thread to view the latest changes (always updated in first post):
https://www.rcgroups.com/forums/showthread.php?2806289-KISS-OSD-Firmware-new-versions-posted-here

If you like the OSD FW, please consider donating:
www.paypal.me/awolf78

KISS OSD V2.2

@awolf78 awolf78 released this Jan 2, 2017 · 62 commits to master since this release

Download the appropriate version and unpack entire contents in a folder.
Read the Wiki for installation instructions.

The Impulse RC version is only for this board:
http://impulserc.com/helix-video-transmitter-board

All others ((micro) minimOSD etc.) download the "normal" version.

KISS OSD v2.1

@awolf78 awolf78 released this Nov 28, 2016 · 75 commits to master since this release

Download the appropriate version for PAL or NTSC.
Read the Wiki for installation and troubleshooting:
https://github.com/awolf78/KISS_OSD/wiki

Pre-release

KISS OSD v2.0 PRE

@awolf78 awolf78 released this Oct 13, 2016 · 90 commits to master since this release

Preliminary release. Needs a bit more testing, but works well so far.