Skip to content

Latest commit

 

History

History
executable file
·
129 lines (103 loc) · 4.54 KB

README.md

File metadata and controls

executable file
·
129 lines (103 loc) · 4.54 KB

HLx Flow for DRAM DMA Example

Table of Contents

  1. Overview
  2. Setup HLx Environment
  3. Create Example Design (GUI)
  4. Create Example Design (Command line)
  5. Simulation
  6. Changing Simulation Sources for Tests
  7. Implementing the Design
  8. AFI Creation
  9. CL Example Software and executing on F1

Overview

For more information about the cl_dram_dma example, read the following information DRAM DMA CL Example

Setup HLx Environment

  • Clone the github and setup the HDK environment

    $ git clone https://github.com/aws/aws-fpga.git $AWS_FPGA_REPO_DIR
    $ cd $AWS_FPGA_REPO_DIR
    $ source hdk_setup.sh
    
  • To setup the HLx Environment, run the following commands:

    $ mkdir -p ~/.Xilinx/Vivado
    $ echo 'source $::env(HDK_SHELL_DIR)/hlx/hlx_setup.tcl' >> ~/.Xilinx/Vivado/Vivado_init.tcl
    

    NOTE: This modifies Vivado defaults, it is recommended you remove this if you wish to run non-HLx examples.

    For more information please see: HLx Setup Instructions.

  • You will also need to setup AWS CLI and S3 Bucket to enable AFI creation

Create Example Design (GUI)

  • To launch Vivado GUI
    • Change directories to the cl/examples/cl_dram_dma_hlx directory
    • Invoke Vivado by typing vivado in the console
    • In the Vivado TCL Console, enter the following to configure the design
    set ::env(CLOCK_A_RECIPE) "0"
    set ::env(CLOCK_B_RECIPE) "0"
    set ::env(CLOCK_C_RECIPE) "0"
    set ::env(device_id) "0xF001"
    set ::env(vendor_id) "0x1D0F"
    set ::env(subsystem_id) "0x1D51"
    set ::env(subsystem_vendor_id) "0xFEDC"
    
    • In the Vivado TCL Console type in the following to create the cl_dram_dma example. The example will be generated in cl/examples/cl_dram_dma_hlx/example_projects. The vivado project is examples_projects/cl_dram_dma.xpr
    aws::make_rtl -examples cl_dram_dma
    

Create Example Design (Command line)

  • Alternatively, to run the Vivado GUI from command line (Linux only)
    • Make sure your $CL_DIR is pointing to the example directory. The following will generate the IPI Block Design (BD)
    $ cd $HDK_DIR/cl/examples/cl_dram_dma_hlx
    $ export CL_DIR=$(pwd)
    $ cd $CL_DIR/build/scripts
    $ ./aws_build_dcp_from_cl.sh -gui
    
    NOTE: The "-gui" switch is optional. It allows you to modify the example design, you will need to have a DISPLAY setup for the GUI to launch. To run the full creation and default implementation flow without the GUI, remove this switch.

Simulation

  • To launch simulation from within the Vivado GUI,
    • Click on Simulation->Run Simulation->Run Behavioral Simulation
    • Add signals needed in the simulation
    • Type run -all in the TCL console

Changing Simulation Sources for Tests

cl_dram_dma has several simulation sources that can be used for simulation (test_ddr, test_dram_dma, test_int, test_peek_poke, test_peek_poke_pcis_axsize).

By default the test_dram_dma is used in the project.

To switch tests:

  • Right click on SIMULATION in the Project Manager
  • Select Simulation Settings…
  • For Verilog options select the … box and modify TEST_NAME to test_null to disable sv stimulus
TEST_NAME=test_ddr
  • Click OK
  • Click Apply
  • Click OK to go back into the Vivado project.

Implementing the Design

  • To run implmentation from within the GUI is opened, in the Design Runs tab:
    • Right click on impl_1 in the Design Runs tab and select Launch Runs…
    • Click OK in the Launch Runs Dialog Box.
    • Click OK in the Missing Synthesis Results Dialog Box

This will run both synthesis and implementation.

AFI Creation

The completed .tar file is located in:

$CL_DIR/build/scripts/example_projects/cl_dram_dma.runs/faas_1/build/checkpoints/to_aws/<timestamp>.Developer_CL.tar  

For information on how to create AFI from this tar file, follow the steps outlined here.

CL Example Software and executing on F1

The runtime software must be compiled for the AFI to run on F1.

Use the software in cl/examples/cl_dram_dma

$ cd $HDK_DIR/cl/examples/cl_dram_dma/software/runtime/
$ make all
$ sudo ./test_dram_dma