docs: Remove settings.aws.enablePodENI from docs (#6088)

Co-authored-by: Maciej Józefczyk <maciej.jozefczyk@ocado.com>
Co-authored-by: Jonathan Innis <joinnis@amazon.com>

website/content/en/docs/concepts/scheduling.md

@@ -104,8 +104,6 @@ Refer to general [Kubernetes GPU](https://kubernetes.io/docs/tasks/manage-gpus/s
 You must enable Pod ENI support in the AWS VPC CNI Plugin before enabling Pod ENI support in Karpenter.  Please refer to the [Security Groups for Pods documentation](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) for instructions.
 {{% /alert %}}
 
-Now that Pod ENI support is enabled in the AWS VPC CNI Plugin, you can enable Pod ENI support in Karpenter by setting the `settings.aws.enablePodENI` Helm chart value to `true`.
-
 Here is an example of a pod-eni resource defined in a deployment manifest:
 ```
 spec:

website/content/en/docs/troubleshooting.md

@@ -663,7 +663,7 @@ This typically occurs when the node has not been considered fully initialized fo
 
 ### Log message of `inflight check failed for node, Expected resource "vpc.amazonaws.com/pod-eni" didn't register on the node` is reported
 
-This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. If you've enabled Pod ENI for Karpenter nodes via the `aws.enablePodENI` setting, you will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
+This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. You will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
 
 ### AWS Node Termination Handler (NTH) interactions
 Karpenter [doesn't currently support draining and terminating on spot rebalance recommendations]({{< ref "concepts/disruption#interruption" >}}). Users who want support for both drain and terminate on spot interruption as well as drain and termination on spot rebalance recommendations may install Node Termination Handler (NTH) on their clusters to support this behavior.

website/content/en/preview/concepts/scheduling.md

@@ -104,8 +104,6 @@ Refer to general [Kubernetes GPU](https://kubernetes.io/docs/tasks/manage-gpus/s
 You must enable Pod ENI support in the AWS VPC CNI Plugin before enabling Pod ENI support in Karpenter.  Please refer to the [Security Groups for Pods documentation](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) for instructions.
 {{% /alert %}}
 
-Now that Pod ENI support is enabled in the AWS VPC CNI Plugin, you can enable Pod ENI support in Karpenter by setting the `settings.aws.enablePodENI` Helm chart value to `true`.
-
 Here is an example of a pod-eni resource defined in a deployment manifest:
 ```
 spec:

website/content/en/preview/troubleshooting.md

@@ -663,7 +663,7 @@ This typically occurs when the node has not been considered fully initialized fo
 
 ### Log message of `inflight check failed for node, Expected resource "vpc.amazonaws.com/pod-eni" didn't register on the node` is reported
 
-This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. If you've enabled Pod ENI for Karpenter nodes via the `aws.enablePodENI` setting, you will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
+This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. You will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
 
 ### AWS Node Termination Handler (NTH) interactions
 Karpenter [doesn't currently support draining and terminating on spot rebalance recommendations]({{< ref "concepts/disruption#interruption" >}}). Users who want support for both drain and terminate on spot interruption as well as drain and termination on spot rebalance recommendations may install Node Termination Handler (NTH) on their clusters to support this behavior.

website/content/en/v0.32/concepts/scheduling.md

@@ -104,8 +104,6 @@ Refer to general [Kubernetes GPU](https://kubernetes.io/docs/tasks/manage-gpus/s
 You must enable Pod ENI support in the AWS VPC CNI Plugin before enabling Pod ENI support in Karpenter.  Please refer to the [Security Groups for Pods documentation](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) for instructions.
 {{% /alert %}}
 
-Now that Pod ENI support is enabled in the AWS VPC CNI Plugin, you can enable Pod ENI support in Karpenter by setting the `settings.aws.enablePodENI` Helm chart value to `true`.
-
 Here is an example of a pod-eni resource defined in a deployment manifest:
 ```
 spec:

website/content/en/v0.32/troubleshooting.md

@@ -651,7 +651,7 @@ This typically occurs when the node has not been considered fully initialized fo
 
 ### Log message of `inflight check failed for node, Expected resource "vpc.amazonaws.com/pod-eni" didn't register on the node` is reported
 
-This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. If you've enabled Pod ENI for Karpenter nodes via the `aws.enablePodENI` setting, you will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
+This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. You will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
 
 ### AWS Node Termination Handler (NTH) interactions
 Karpenter [doesn't currently support draining and terminating on spot rebalance recommendations]({{< ref "concepts/disruption#interruption" >}}). Users who want support for both drain and terminate on spot interruption as well as drain and termination on spot rebalance recommendations may install Node Termination Handler (NTH) on their clusters to support this behavior.

website/content/en/v0.34/concepts/scheduling.md

@@ -104,8 +104,6 @@ Refer to general [Kubernetes GPU](https://kubernetes.io/docs/tasks/manage-gpus/s
 You must enable Pod ENI support in the AWS VPC CNI Plugin before enabling Pod ENI support in Karpenter.  Please refer to the [Security Groups for Pods documentation](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) for instructions.
 {{% /alert %}}
 
-Now that Pod ENI support is enabled in the AWS VPC CNI Plugin, you can enable Pod ENI support in Karpenter by setting the `settings.aws.enablePodENI` Helm chart value to `true`.
-
 Here is an example of a pod-eni resource defined in a deployment manifest:
 ```
 spec:

website/content/en/v0.34/troubleshooting.md

@@ -663,7 +663,7 @@ This typically occurs when the node has not been considered fully initialized fo
 
 ### Log message of `inflight check failed for node, Expected resource "vpc.amazonaws.com/pod-eni" didn't register on the node` is reported
 
-This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. If you've enabled Pod ENI for Karpenter nodes via the `aws.enablePodENI` setting, you will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
+This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. You will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
 
 ### AWS Node Termination Handler (NTH) interactions
 Karpenter [doesn't currently support draining and terminating on spot rebalance recommendations]({{< ref "concepts/disruption#interruption" >}}). Users who want support for both drain and terminate on spot interruption as well as drain and termination on spot rebalance recommendations may install Node Termination Handler (NTH) on their clusters to support this behavior.

website/content/en/v0.35/concepts/scheduling.md

@@ -104,8 +104,6 @@ Refer to general [Kubernetes GPU](https://kubernetes.io/docs/tasks/manage-gpus/s
 You must enable Pod ENI support in the AWS VPC CNI Plugin before enabling Pod ENI support in Karpenter.  Please refer to the [Security Groups for Pods documentation](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) for instructions.
 {{% /alert %}}
 
-Now that Pod ENI support is enabled in the AWS VPC CNI Plugin, you can enable Pod ENI support in Karpenter by setting the `settings.aws.enablePodENI` Helm chart value to `true`.
-
 Here is an example of a pod-eni resource defined in a deployment manifest:
 ```
 spec:

website/content/en/v0.35/troubleshooting.md

@@ -663,7 +663,7 @@ This typically occurs when the node has not been considered fully initialized fo
 
 ### Log message of `inflight check failed for node, Expected resource "vpc.amazonaws.com/pod-eni" didn't register on the node` is reported
 
-This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. If you've enabled Pod ENI for Karpenter nodes via the `aws.enablePodENI` setting, you will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
+This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. You will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
 
 ### AWS Node Termination Handler (NTH) interactions
 Karpenter [doesn't currently support draining and terminating on spot rebalance recommendations]({{< ref "concepts/disruption#interruption" >}}). Users who want support for both drain and terminate on spot interruption as well as drain and termination on spot rebalance recommendations may install Node Termination Handler (NTH) on their clusters to support this behavior.

website/content/en/v0.36/concepts/scheduling.md

@@ -104,8 +104,6 @@ Refer to general [Kubernetes GPU](https://kubernetes.io/docs/tasks/manage-gpus/s
 You must enable Pod ENI support in the AWS VPC CNI Plugin before enabling Pod ENI support in Karpenter.  Please refer to the [Security Groups for Pods documentation](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) for instructions.
 {{% /alert %}}
 
-Now that Pod ENI support is enabled in the AWS VPC CNI Plugin, you can enable Pod ENI support in Karpenter by setting the `settings.aws.enablePodENI` Helm chart value to `true`.
-
 Here is an example of a pod-eni resource defined in a deployment manifest:
 ```
 spec:

website/content/en/v0.36/troubleshooting.md

@@ -663,7 +663,7 @@ This typically occurs when the node has not been considered fully initialized fo
 
 ### Log message of `inflight check failed for node, Expected resource "vpc.amazonaws.com/pod-eni" didn't register on the node` is reported
 
-This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. If you've enabled Pod ENI for Karpenter nodes via the `aws.enablePodENI` setting, you will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
+This error indicates that the `vpc.amazonaws.com/pod-eni` resource was never reported on the node. You will need to make the corresponding change to the VPC CNI to enable [security groups for pods](https://docs.aws.amazon.com/eks/latest/userguide/security-groups-for-pods.html) which will cause the resource to be registered.
 
 ### AWS Node Termination Handler (NTH) interactions
 Karpenter [doesn't currently support draining and terminating on spot rebalance recommendations]({{< ref "concepts/disruption#interruption" >}}). Users who want support for both drain and terminate on spot interruption as well as drain and termination on spot rebalance recommendations may install Node Termination Handler (NTH) on their clusters to support this behavior.