To run a job using the Amazon Sagemaker Operators for Kubernetes, you can either apply a YAML file or use the supplied Helm charts.
All operator sample jobs in the following tutorials use sample data taken from a public MNIST dataset. In order to run these samples, download the dataset into your S3 bucket. You can find the dataset in Download the MNIST Dataset.
Contents
- TrainingJob operator
- HyperParameterTuningJobs operator
- BatchTransformJobs operator
- Real-time inference
Training job operators reconcile your specified training job spec to Amazon SageMaker by launching it for you in Amazon SageMaker. You can learn more about Amazon SageMaker training jobs in the Amazon SageMaker CreateTrainingJob API documentation.
Download the sample YAML file for training using the following command:
wget https://github.com/aws/amazon-sagemaker-operator-for-k8s/blob/master/samples/xgboost-mnist-trainingjob.yaml
Edit the xgboost-mnist-trainingjob.yaml
file to replace the roleArn
parameter with your <sagemaker-execution-role>
, and outputPath
with your S3 bucket that the Amazon SageMaker
execution role has write access to. The roleArn
must have permissions so that Amazon SageMaker
can access Amazon S3, Amazon CloudWatch, and other services on your
behalf. For more information on creating an Amazon SageMaker
ExecutionRole, see Amazon SageMaker
Roles.
Apply the YAML file using the
following command:
kubectl apply -f xgboost-mnist-trainingjob.yaml
You can use Helm Charts to run TrainingJobs.
Clone the github repo to get the source using the following command:
git clone https://github.com/aws/amazon-sagemaker-operator-for-k8s.git
Navigate to the
amazon-sagemaker-operator-for-k8s/hack/charts/training-jobs/
folder
and edit the values.yaml
file to replace values
like rolearn
and outputpath
with values that correspond to
your account. The RoleARN must have permissions so that Amazon SageMaker
can access Amazon S3, Amazon CloudWatch, and other services on your
behalf. For more information on creating an Amazon SageMaker
ExecutionRole, see Amazon SageMaker
Roles.
With the roles and S3 buckets replaced with appropriate values
in values.yaml
, you can create a training job using the following
command:
helm install . --generate-name
Your output should look like the following:
NAME: chart-12345678 LAST DEPLOYED: Wed Nov 20 23:35:49 2019 NAMESPACE: default STATUS: deployed REVISION: 1 TEST SUITE: None NOTES: Thanks for installing the sagemaker-k8s-trainingjob.
To verify that the Helm Chart was created successfully, run:
helm ls
Your output should look like the following:
NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION chart-12345678 default 1 2019-11-20 23:35:49.9136092 +0000 UTC deployed sagemaker-k8s-trainingjob-0.1.0 rolebased-12345678 default 1 2019-11-20 23:14:59.6777082 +0000 UTC deployed sagemaker-k8s-operator-0.1.0
helm install
creates a TrainingJob
k8s resource. The operator
launches the actual training job in Amazon SageMaker and updates
the TrainingJob
k8s resource to reflect the status of the job in
Amazon SageMaker. You incur charges for Amazon SageMaker resources used
during the duration of your job. You do not incur any charges once your
job completes or stops.
Note: Amazon SageMaker does not allow you to update a running
training job. You cannot edit any parameter and re-apply the
file/config. Either change the metadata name or delete the existing job
and create a new one. Similar to existing training job operators like
TFJob in Kubeflow, update
is not supported.
Use the following command to list all jobs created using the k8s operator:
kubectl get TrainingJob
The output listing all jobs should look like the following:
kubectl get trainingjobs NAME STATUS SECONDARY-STATUS CREATION-TIME SAGEMAKER-JOB-NAME xgboost-mnist-from-for-s3 InProgress Starting 2019-11-20T23:42:35Z xgboost-mnist-from-for-s3-examplef11eab94e0ed4671d5a8f
A training job continues to be listed after the job has completed or
failed. You can remove a TrainingJob
job from the list by
following the Delete a Training Job steps. Jobs that have completed or
stopped do not incur any charges for Amazon SageMaker resources.
The STATUS
field can be one of the following values:
Completed
InProgress
Failed
Stopped
Stopping
These statuses come directly from the Amazon SageMaker official API documentation.
In addition to the official Amazon SageMaker status, it is possible
for STATUS
to be SynchronizingK8sJobWithSageMaker
. This
means that the operator has not yet processed the job.
The secondary statuses come directly from the Amazon SageMaker official API documentation. They contain more granular information about the status of the job.
You can get more details about the training job by using
the describe
kubectl verb. This is typically used for debugging a
problem or checking the parameters of a training job. To get information
about your training job, use the following command:
kubectl describe trainingjob xgboost-mnist-from-for-s3
The output for your training job should look like the following:
Name: xgboost-mnist-from-for-s3 Namespace: default Labels: <none> Annotations: <none> API Version: sagemaker.aws.amazon.com/v1 Kind: TrainingJob Metadata: Creation Timestamp: 2019-11-20T23:42:35Z Finalizers: sagemaker-operator-finalizer Generation: 2 Resource Version: 23119 Self Link: /apis/sagemaker.aws.amazon.com/v1/namespaces/default/trainingjobs/xgboost-mnist-from-for-s3 UID: 6d7uiui-0bef-11ea-b94e-0ed467example Spec: Algorithm Specification: Training Image: 8256416981234.dkr.ecr.us-east-2.amazonaws.com/xgboost:1 Training Input Mode: File Hyper Parameters: Name: eta Value: 0.2 Name: gamma Value: 4 Name: max_depth Value: 5 Name: min_child_weight Value: 6 Name: num_class Value: 10 Name: num_round Value: 10 Name: objective Value: multi:softmax Name: silent Value: 0 Input Data Config: Channel Name: train Compression Type: None Content Type: text/csv Data Source: S 3 Data Source: S 3 Data Distribution Type: FullyReplicated S 3 Data Type: S3Prefix S 3 Uri: https://s3-us-east-2.amazonaws.com/my-bucket/sagemaker/xgboost-mnist/train/ Channel Name: validation Compression Type: None Content Type: text/csv Data Source: S 3 Data Source: S 3 Data Distribution Type: FullyReplicated S 3 Data Type: S3Prefix S 3 Uri: https://s3-us-east-2.amazonaws.com/my-bucket/sagemaker/xgboost-mnist/validation/ Output Data Config: S 3 Output Path: s3://my-bucket/sagemaker/xgboost-mnist/xgboost/ Region: us-east-2 Resource Config: Instance Count: 1 Instance Type: ml.m4.xlarge Volume Size In GB: 5 Role Arn: arn:aws:iam::12345678910:role/service-role/AmazonSageMaker-ExecutionRole Stopping Condition: Max Runtime In Seconds: 86400 Training Job Name: xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94e0example Status: Cloud Watch Log URL: https://us-east-2.console.aws.amazon.com/cloudwatch/home?region=us-east-2#logStream:group=/aws/sagemaker/TrainingJobs;prefix=<example>;streamFilter=typeLogStreamPrefix Last Check Time: 2019-11-20T23:44:29Z Sage Maker Training Job Name: xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94eexample Secondary Status: Downloading Training Job Status: InProgress Events: <none>
Use the following command to see the logs from the kmeans-mnist
training job:
kubectl smlogs trainingjob xgboost-mnist-from-for-s3
Your output will look similar to the following. The logs from instances are ordered chronologically.
"xgboost-mnist-from-for-s3" has SageMaker TrainingJobName "xgboost-mnist-from-for-s3-123456789" in region "us-east-2", status "InProgress" and secondary status "Starting" xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94e0ed46example/algo-1-1574293123 2019-11-20 23:45:24.7 +0000 UTC Arguments: train xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94e0ed46example/algo-1-1574293123 2019-11-20 23:45:24.7 +0000 UTC [2019-11-20:23:45:22:INFO] Running standalone xgboost training. xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94e0ed46example/algo-1-1574293123 2019-11-20 23:45:24.7 +0000 UTC [2019-11-20:23:45:22:INFO] File size need to be processed in the node: 1122.95mb. Available memory size in the node: 8586.0mb xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94e0ed46example/algo-1-1574293123 2019-11-20 23:45:24.7 +0000 UTC [2019-11-20:23:45:22:INFO] Determined delimiter of CSV input is ',' xgboost-mnist-from-for-s3-6d7fa0af0bef11eab94e0ed46example/algo-1-1574293123 2019-11-20 23:45:24.7 +0000 UTC [23:45:22] S3DistributionType set as FullyReplicated
Use the following command to stop a training job on Amazon SageMaker:
kubectl delete trainingjob xgboost-mnist-from-for-s3
This command removes the Amazon SageMaker training job from k8s. This command returns the following output:
trainingjob.sagemaker.aws.amazon.com "xgboost-mnist-from-for-s3" deleted
If the job is still in progress on Amazon SageMaker, the job will stop. You do not incur any charges for Amazon SageMaker resources after your job stops or completes.
Note: Amazon SageMaker does not delete training jobs. Stopped jobs continue to show on the Amazon SageMaker console. The delete command takes about 2 minutes to clean up the resources from Amazon SageMaker.
Hyperparameter tuning job operators reconcile your specified hyperparameter tuning job spec to Amazon SageMaker by launching it in Amazon SageMaker. You can learn more about Amazon SageMaker hyperparameter tuning jobs in the Amazon SageMaker CreateHyperParameterTuningJob API documentation.
Download the sample YAML file for the hyperparameter tuning job using the following command:
wget https://github.com/aws/amazon-sagemaker-operator-for-k8s/blob/master/samples/xgboost-mnist-hpo.yaml
Edit the xgboost-mnist-hpo.yaml
file to replace
the roleArn
parameter with your <sagemaker-execution-role>. For
HyperparameterTuningJob to succeed, you must also change
the s3InputPath
and s3OutputPath
to values that correspond
to your account. Apply the updates YAML file using the following
command:
kubectl apply -f xgboost-mnist-hpo.yaml
You can use Helm Charts to run HyperParameterTuningJobs.
Clone the github repo to get the source using the following command:
git clone https://github.com/aws/amazon-sagemaker-operator-for-k8s.git
Navigate to the
amazon-sagemaker-operator-for-k8s/hack/charts/hyperparameter-tuning-jobs/
folder.
Edit the values.yaml
file to replace the roleArn
parameter
with your <sagemaker-execution-role>. For HyperparameterTuningJob to
succeed, you must also change the s3InputPath
and s3OutputPath
to values that correspond to your account.
With the roles and Amazon S3 paths replaced with appropriate values
in values.yaml
, you can create a hyperparameter tuning job using
the following command:
helm install . --generate-name
Your output will look similar to the following:
NAME: chart-1574292948 LAST DEPLOYED: Wed Nov 20 23:35:49 2019 NAMESPACE: default STATUS: deployed REVISION: 1 TEST SUITE: None NOTES: Thanks for installing the sagemaker-k8s-hyperparametertuningjob.
To verify that the Helm Chart was created successfully, run the following command:
helm ls
Your output should look like the following:
NAME NAMESPACE REVISION UPDATED chart-1474292948 default 1 2019-11-20 23:35:49.9136092 +0000 UTC deployed sagemaker-k8s-hyperparametertuningjob-0.1.0 STATUS CHART APP VERSION chart-1574292948 default 1 2019-11-20 23:35:49.9136092 +0000 UTC deployed sagemaker-k8s-trainingjob-0.1.0 rolebased-1574291698 default 1 2019-11-20 23:14:59.6777082 +0000 UTC deployed sagemaker-k8s-operator-0.1.0
helm install
creates a HyperParameterTuningJob
k8s resource.
The operator launches the actual hyperparameter optimization job in
Amazon SageMaker and updates the HyperParameterTuningJob
k8s
resource to reflect the status of the job in Amazon SageMaker. You incur
charges for Amazon SageMaker resources used during the duration of your
job. You do not incur any charges once your job completes or stops.
Note: Amazon SageMaker does not allow you to update a running
hyperparameter tuning job. You cannot edit any parameter and re-apply
the file/config. You must either change the metadata name or delete the
existing job and create a new one. Similar to existing training job
operators like TFJob in Kubeflow, update
is not supported.
Use the following command to list all jobs created using the k8s operator:
kubectl get hyperparametertuningjob
Your output will look like the following:
NAME STATUS CREATION-TIME COMPLETED INPROGRESS ERRORS STOPPED BEST-TRAINING-JOB SAGEMAKER-JOB-NAME xgboost-mnist-hpo Completed 2019-10-17T01:15:52Z 10 0 0 0 xgboostha92f5e3cf07b11e9bf6c06d6-009-4c7a123 xgboostha92f5e3cf07b11e9bf6c123
A hyper parameter tuning job will continue to be listed after the job
has completed or failed. You can remove a hyperparametertuningjob
from the list by following the steps in Delete a Hyper Parameter Tuning
Job. Jobs that have completed or stopped do not incur any charges for
Amazon SageMaker resources.
The STATUS
field can be one of the following values:
Completed
InProgress
Failed
Stopped
Stopping
These statuses come directly from the Amazon SageMaker official API documentation.
In addition to the official Amazon SageMaker status, it is possible
for STATUS
to be SynchronizingK8sJobWithSageMaker
. This
means that the operator has not yet processed the job.
The output has several counters,
like COMPLETED
and INPROGRESS
. These represent how many
training jobs have completed and are in progress, respectively. For more
information about how these are determined,
see TrainingJobStatusCounters in
the Amazon SageMaker API documentation.
This column contains the name of the TrainingJob
that best
optimized the selected metric.
To see a summary of the tuned hyperparameters, run:
kubectl describe hyperparametertuningjob xgboost-mnist-hpo
To see detailed information about the TrainingJob
, run:
kubectl describe trainingjobs <job name>
You can also track all 10 training jobs in k8s launched by
HyperparameterTuningJob
by running the following command:
kubectl get trainingjobs
You can obtain debugging details using the describe
kubectl verb
by running the following command.
kubectl describe hyperparametertuningjob xgboost-mnist-hpo
In addition to information about the tuning job, the Amazon SageMaker
Operator for Kubernetes also exposes the best training
job found
by the hyperparameter tuning job in the describe
output as
follows:
Name: xgboost-mnist-hpo Namespace: default Labels: <none> Annotations: kubectl.kubernetes.io/last-applied-configuration: {"apiVersion":"sagemaker.aws.amazon.com/v1","kind":"HyperparameterTuningJob","metadata":{"annotations":{},"name":"xgboost-mnist-hpo","namespace":... API Version: sagemaker.aws.amazon.com/v1 Kind: HyperparameterTuningJob Metadata: Creation Timestamp: 2019-10-17T01:15:52Z Finalizers: sagemaker-operator-finalizer Generation: 2 Resource Version: 8167 Self Link: /apis/sagemaker.aws.amazon.com/v1/namespaces/default/hyperparametertuningjobs/xgboost-mnist-hpo UID: a92f5e3c-f07b-11e9-bf6c-06d6f303uidu Spec: Hyper Parameter Tuning Job Config: Hyper Parameter Tuning Job Objective: Metric Name: validation:error Type: Minimize Parameter Ranges: Integer Parameter Ranges: Max Value: 20 Min Value: 10 Name: num_round Scaling Type: Linear Resource Limits: Max Number Of Training Jobs: 10 Max Parallel Training Jobs: 10 Strategy: Bayesian Training Job Early Stopping Type: Off Hyper Parameter Tuning Job Name: xgboostha92f5e3cf07b11e9bf6c06d6 Region: us-east-2 Training Job Definition: Algorithm Specification: Training Image: 12345678910.dkr.ecr.us-east-2.amazonaws.com/xgboost:1 Training Input Mode: File Input Data Config: Channel Name: train Content Type: text/csv Data Source: s3DataSource: s3DataDistributionType: FullyReplicated s3DataType: S3Prefix s3Uri: https://s3-us-east-2.amazonaws.com/my-bucket/sagemaker/xgboost-mnist/train/ Channel Name: validation Content Type: text/csv Data Source: s3DataSource: s3DataDistributionType: FullyReplicated s3DataType: S3Prefix s3Uri: https://s3-us-east-2.amazonaws.com/my-bucket/sagemaker/xgboost-mnist/validation/ Output Data Config: s3OutputPath: https://s3-us-east-2.amazonaws.com/my-bucket/sagemaker/xgboost-mnist/xgboost Resource Config: Instance Count: 1 Instance Type: ml.m4.xlarge Volume Size In GB: 5 Role Arn: arn:aws:iam::123456789012:role/service-role/AmazonSageMaker-ExecutionRole Static Hyper Parameters: Name: base_score Value: 0.5 Name: booster Value: gbtree Name: csv_weights Value: 0 Name: dsplit Value: row Name: grow_policy Value: depthwise Name: lambda_bias Value: 0.0 Name: max_bin Value: 256 Name: max_leaves Value: 0 Name: normalize_type Value: tree Name: objective Value: reg:linear Name: one_drop Value: 0 Name: prob_buffer_row Value: 1.0 Name: process_type Value: default Name: rate_drop Value: 0.0 Name: refresh_leaf Value: 1 Name: sample_type Value: uniform Name: scale_pos_weight Value: 1.0 Name: silent Value: 0 Name: sketch_eps Value: 0.03 Name: skip_drop Value: 0.0 Name: tree_method Value: auto Name: tweedie_variance_power Value: 1.5 Stopping Condition: Max Runtime In Seconds: 86400 Status: Best Training Job: Creation Time: 2019-10-17T01:16:14Z Final Hyper Parameter Tuning Job Objective Metric: Metric Name: validation:error Value: Objective Status: Succeeded Training End Time: 2019-10-17T01:20:24Z Training Job Arn: arn:aws:sagemaker:us-east-2:123456789012:training-job/xgboostha92f5e3cf07b11e9bf6c06d6-009-4sample Training Job Name: xgboostha92f5e3cf07b11e9bf6c06d6-009-4c7a3059 Training Job Status: Completed Training Start Time: 2019-10-17T01:18:35Z Tuned Hyper Parameters: Name: num_round Value: 18 Hyper Parameter Tuning Job Status: Completed Last Check Time: 2019-10-17T01:21:01Z Sage Maker Hyper Parameter Tuning Job Name: xgboostha92f5e3cf07b11e9bf6c06d6 Training Job Status Counters: Completed: 10 In Progress: 0 Non Retryable Error: 0 Retryable Error: 0 Stopped: 0 Total Error: 0 Events: <none>
Hyperparameter tuning jobs do not have logs, but all training jobs launched by them do have logs. These logs can be accessed as if they were a normal training job. For more information, see View Logs from Training Jobs.
Use the following command to stop a hyperparameter job in Amazon SageMaker.
kubectl delete hyperparametertuningjob xgboost-mnist-hpo
This command removes the hyperparameter tuning job and associated training jobs from your Kubernetes cluster, as well as stops them in Amazon SageMaker. Jobs that have stopped or completed do not incur any charges for Amazon SageMaker resources. Amazon SageMaker does not delete hyperparameter tuning jobs. Stopped jobs continue to show on the Amazon SageMaker Console.
Your output should look like the following:
hyperparametertuningjob.sagemaker.aws.amazon.com "xgboost-mnist-hpo" deleted
Note: The delete command takes about 2 minutes to clean up the resources from Amazon SageMaker.
Batch transform job operators reconcile your specified batch transform job spec to Amazon SageMaker by launching it in Amazon SageMaker. You can learn more about Amazon SageMaker batch transform job in the Amazon SageMaker CreateTransformJob API documentation.
Download the sample YAML file for the batch transform job using the following command:
wget https://github.com/aws/amazon-sagemaker-operator-for-k8s/blob/master/samples/xgboost-mnist-batchtransform.yaml
Edit the file xgboost-mnist-batchtransform.yaml
to change
necessary parameters to replace the inputdataconfig
with your
input data and s3OutputPath
with your S3 buckets that the Amazon
SageMaker execution role has write access to.
Apply the YAML file using the following command:
kubectl apply -f xgboost-mnist-batchtransform.yaml
You can use Helm Charts to run batch transform jobs.
Clone the github repo to get the source using the following command:
git clone https://github.com/aws/amazon-sagemaker-operator-for-k8s.git
Navigate to the
amazon-sagemaker-operator-for-k8s/hack/charts/batch-transform-jobs/
folder.
Edit the values.yaml
file to replace the inputdataconfig
with your input data and outputPath with your S3 buckets that the Amazon
SageMaker execution role has write access to.
Use the following command to create a batch transform job:
helm install . --generate-name
Your output should look like the following:
NAME: chart-1574292948 LAST DEPLOYED: Wed Nov 20 23:35:49 2019 NAMESPACE: default STATUS: deployed REVISION: 1 TEST SUITE: None NOTES: Thanks for installing the sagemaker-k8s-batch-transform-job.
To verify that the Helm Chart was created successfully, run the following command:
helm ls NAME NAMESPACE REVISION UPDATED STATUS CHART APP VERSION chart-1474292948 default 1 2019-11-20 23:35:49.9136092 +0000 UTC deployed sagemaker-k8s-batchtransformjob-0.1.0 chart-1474292948 default 1 2019-11-20 23:35:49.9136092 +0000 UTC deployed sagemaker-k8s-hyperparametertuningjob-0.1.0 chart-1574292948 default 1 2019-11-20 23:35:49.9136092 +0000 UTC deployed sagemaker-k8s-trainingjob-0.1.0 rolebased-1574291698 default 1 2019-11-20 23:14:59.6777082 +0000 UTC deployed sagemaker-k8s-operator-0.1.0
The previous command creates a BatchTransformJob
k8s resource. The
operator launches the actual transform job in Amazon SageMaker and
updates the BatchTransformJob
k8s resource to reflect the status
of the job in Amazon SageMaker. You incur charges for Amazon SageMaker
resources used during the duration of your job. You do not incur any
charges once your job completes or stops.
Note: Amazon SageMaker does not allow you to update a running batch
transform job. You cannot edit any parameter and re-apply the
file/config. You must either change the metadata name or delete the
existing job and create a new one. Similar to existing training job
operators like TFJob in Kubeflow, update
is not supported.
Use the following command to list all jobs created using the k8s operator:
kubectl get batchtransformjob
Your output should look like the following:
NAME STATUS CREATION-TIME SAGEMAKER-JOB-NAME xgboost-mnist-batch-transform Completed 2019-11-18T03:44:00Z xgboost-mnist-a88fb19809b511eaac440aa8axgboost
A batch transform job will continue to be listed after the job has
completed or failed. You can remove a hyperparametertuningjob
from the list by following the Delete a Batch Transform Job steps. Jobs
that have completed or stopped do not incur any charges for
Amazon SageMaker resources.
The STATUS
field can be one of the following values:
Completed
InProgress
Failed
Stopped
Stopping
These statuses come directly from the Amazon SageMaker official API documentation.
In addition to the official Amazon SageMaker status, it is possible
for STATUS
to be SynchronizingK8sJobWithSageMaker
. This
means that the operator has not yet processed the job and will get to it
soon.
You can obtain debugging details using the describe
kubectl verb
by running the following command.
kubectl describe batchtransformjob xgboost-mnist-batch-transform
Your output should look like the following:
Name: xgboost-mnist-batch-transform Namespace: default Labels: <none> Annotations: kubectl.kubernetes.io/last-applied-configuration: {"apiVersion":"sagemaker.aws.amazon.com/v1","kind":"BatchTransformJob","metadata":{"annotations":{},"name":"xgboost-mnist","namespace"... API Version: sagemaker.aws.amazon.com/v1 Kind: BatchTransformJob Metadata: Creation Timestamp: 2019-11-18T03:44:00Z Finalizers: sagemaker-operator-finalizer Generation: 2 Resource Version: 21990924 Self Link: /apis/sagemaker.aws.amazon.com/v1/namespaces/default/batchtransformjobs/xgboost-mnist UID: a88fb198-09b5-11ea-ac44-0aa8a9UIDNUM Spec: Model Name: TrainingJob-20190814SMJOb-IKEB Region: us-east-1 Transform Input: Content Type: text/csv Data Source: S 3 Data Source: S 3 Data Type: S3Prefix S 3 Uri: s3://my-bucket/mnist_kmeans_example/input Transform Job Name: xgboost-mnist-a88fb19809b511eaac440aa8a9SMJOB Transform Output: S 3 Output Path: s3://my-bucket/mnist_kmeans_example/output Transform Resources: Instance Count: 1 Instance Type: ml.m4.xlarge Status: Last Check Time: 2019-11-19T22:50:40Z Sage Maker Transform Job Name: xgboost-mnist-a88fb19809b511eaac440aaSMJOB Transform Job Status: Completed Events: <none>
Use the following command to see the logs from the xgboost-mnist
batch transform job:
kubectl smlogs batchtransformjob xgboost-mnist-batch-transform
Use the following command to stop a batch transform job in Amazon SageMaker.
kubectl delete batchTransformJob xgboost-mnist-batch-transform
Your output will look like the following:
batchtransformjob.sagemaker.aws.amazon.com "xgboost-mnist" deleted
This command removes the batch transform job from your Kubernetes cluster, as well as stops them in Amazon SageMaker. Jobs that have stopped or completed do not incur any charges for Amazon SageMaker resources. Delete takes about 2 minutes to clean up the resources from Amazon SageMaker.
Note: Amazon SageMaker does not delete batch transform jobs. Stopped jobs continue to show on the Amazon SageMaker console.
HostingDeployments support creating and deleting an endpoint, as well as updating an existing endpoint. The hosting deployment operator reconciles your specified hosting deployment job spec to Amazon SageMaker by creating models, endpoint-configs and endpoints in Amazon SageMaker. You can learn more about Amazon SageMaker inference in the Amazon SageMaker CreateEndpoint API documentaiton.
Download the sample YAML file for the hosting deployment job using the following command:
wget https://github.com/aws/amazon-sagemaker-operator-for-k8s/blob/master/samples/xgboost-mnist-hostingdeployment.yaml
The xgboost-mnist-hostingdeployment.yaml
file has the following components that can be edited as required:
- ProductionVariants. A production variant is a set of instances serving a single model. Amazon SageMaker will load-balance between all production variants according to set weights.
- Models. A model is the containers and execution role ARN necessary to serve a model. It requires at least a single container.
- Containers. A container specifies the dataset and serving image. If you are using your own custom algorithm instead of an algorithm provided by Amazon SageMaker, the inference code must meet Amazon SageMaker requirements. For more information, see Using Your Own Algorithms with Amazon SageMaker.
To create a HostingDeployment, use kubectl
to apply the
file hosting.yaml
with the following command:
kubectl apply -f hosting.yaml
Amazon SageMaker create an endpoint with the specified configuration. You incur charges for Amazon SageMaker resources used during the lifetime of your endpoint. You do not incur any charges once your endpoint is deleted.
The creation process will take approximately 10 minutes.
To verify that the HostingDeployment was created, use the following command:
kubectl get hostingdeployments
Your output should look like the following:
NAME STATUS SAGEMAKER-ENDPOINT-NAME host-xgboost Creating host-xgboost-def0e83e0d5f11eaaa450aSMLOGS
The status field can be one of several values:
SynchronizingK8sJobWithSageMaker
: The operator is preparing to create the endpoint.ReconcilingEndpoint
: The operator is creating, updating, or deleting endpoint resources. If the HostingDeployment remains in this state, usekubectl describe
to see the reason in theAdditional
field.OutOfService
: Endpoint is not available to take incoming requests.Creating
: CreateEndpoint is executing.Updating
: UpdateEndpoint or UpdateEndpointWeightsAndCapacities is executing.SystemUpdating
: Endpoint is undergoing maintenance and cannot be updated or deleted or re-scaled until it has completed. This maintenance operation does not change any customer-specified values such as VPC config, KMS encryption, model, instance type, or instance count.RollingBack
: Endpoint fails to scale up or down or change its variant weight and is in the process of rolling back to its previous configuration. Once the rollback completes, endpoint returns to anInService
status. This transitional status only applies to an endpoint that has autoscaling enabled and is undergoing variant weight or capacity changes as part of an UpdateEndpointWeightsAndCapacities call or when the UpdateEndpointWeightsAndCapacities operation is called explicitly.InService
: Endpoint is available to process incoming requests.Deleting
: DeleteEndpoint is executing.Failed
: Endpoint could not be created, updated, or re-scaled. Use DescribeEndpoint:FailureReason for information about the failure. DeleteEndpoint is the only operation that can be performed on a failed endpoint.
You can obtain debugging details using the describe
kubectl verb
by running the following command.
kubectl describe hostingdeployment
Your output should look like the following:
Name: host-xgboost Namespace: default Labels: <none> Annotations: kubectl.kubernetes.io/last-applied-configuration: {"apiVersion":"sagemaker.aws.amazon.com/v1","kind":"HostingDeployment","metadata":{"annotations":{},"name":"host-xgboost","namespace":"def..." API Version: sagemaker.aws.amazon.com/v1 Kind: HostingDeployment Metadata: Creation Timestamp: 2019-11-22T19:40:00Z Finalizers: sagemaker-operator-finalizer Generation: 1 Resource Version: 4258134 Self Link: /apis/sagemaker.aws.amazon.com/v1/namespaces/default/hostingdeployments/host-xgboost UID: def0e83e-0d5f-11ea-aa45-0a3507uiduid Spec: Containers: Container Hostname: xgboost Image: 123456789012.dkr.ecr.us-east-2.amazonaws.com/xgboost:latest Model Data URL: s3://my-bucket/inference/xgboost-mnist/model.tar.gz Models: Containers: xgboost Execution Role Arn: arn:aws:iam::123456789012:role/service-role/AmazonSageMaker-ExecutionRole Name: xgboost-model Primary Container: xgboost Production Variants: Initial Instance Count: 1 Instance Type: ml.c5.large Model Name: xgboost-model Variant Name: all-traffic Region: us-east-2 Status: Creation Time: 2019-11-22T19:40:04Z Endpoint Arn: arn:aws:sagemaker:us-east-2:123456789012:endpoint/host-xgboost-def0e83e0d5f11eaaaexample Endpoint Config Name: host-xgboost-1-def0e83e0d5f11e-e08f6c510d5f11eaaa450aexample Endpoint Name: host-xgboost-def0e83e0d5f11eaaa450a350733ba06 Endpoint Status: Creating Endpoint URL: https://runtime.sagemaker.us-east-2.amazonaws.com/endpoints/host-xgboost-def0e83e0d5f11eaaaexample/invocations Last Check Time: 2019-11-22T19:43:57Z Last Modified Time: 2019-11-22T19:40:04Z Model Names: Name: xgboost-model Value: xgboost-model-1-def0e83e0d5f11-df5cc9fd0d5f11eaaa450aexample Events: <none>
The status field provides more information using the following fields:
Additional
: Additional information about the status of the hosting deployment. This field is optional and only gets populated in case of error.Creation Time
: When the endpoint was created in Amazon SageMaker.Endpoint ARN
: The Amazon SageMaker endpoint ARN.Endpoint Config Name
: The Amazon SageMaker name of the endpoint configuration.Endpoint Name
: The Amazon SageMaker name of the endpoint.Endpoint Status
: The Status of the endpoint.Endpoint URL
: The HTTPS URL that can be used to access the endpoint. For more information, see Deploy a Model on Amazon SageMaker Hosting Services.FailureReason
: If a create, update, or delete command fails, the cause will be shown here.Last Check Time
: The last time the operator checked the status of the endpoint.Last Modified Time
: The last time the endpoint was modified.Model Names
: A key-value pair of HostingDeployment model names to Amazon SageMaker model names.
Once the endpoint status is InService
, you can invoke the endpoint
in two ways: using the AWS CLI, which does authentication and URL
request signing, or using an HTTP client like curl. If you use your own
client, you will need to do AWSv4 URL signing and authentication on your
own.
To invoke the endpoint using the AWS CLI, run the following command.
Make sure to replace the Region and endpoint-name with your endpoint’s
Region and Amazon SageMaker endpoint name. This information can be
obtained from the output of kubectl describe
.
# Invoke the endpoint with mock input data. aws sagemaker-runtime invoke-endpoint \ --region us-east-2 \ --endpoint-name <endpoint name> \ --body $(seq 784 | xargs echo | sed 's/ /,/g') \ >(cat) \ --content-type text/csv > /dev/null
For example, if your Region were us-east-2
and your endpoint
config name were host-xgboost-f56b6b280d7511ea824b129926example
,
then the following command would invoke the endpoint:
aws sagemaker-runtime invoke-endpoint \ --region us-east-2 \ --endpoint-name host-xgboost-f56b6b280d7511ea824b1299example \ --body $(seq 784 | xargs echo | sed 's/ /,/g') \ >(cat) \ --content-type text/csv > /dev/null 4.95847082138
Here, 4.95847082138
is the prediction from the model for the mock
data.
Once a HostingDeployment has a status of InService
, it can be
updated. It might take about 10 minutes for HostingDeployment to be in
service. To verify that the status is InService
, use the following
command:
kubectl get hostingdeployments
The HostingDeployment can be updated before the status
is InService
. The operator will wait until the Amazon SageMaker
endpoint is InService
before applying the update.
To apply an update, modify the hosting.yaml
file. For example,
change the initialInstanceCount
field from 1 to 2 as follows:
apiVersion: sagemaker.aws.amazon.com/v1 kind: HostingDeployment metadata: name: host-xgboost spec: region: us-east-2 productionVariants: - variantName: all-traffic modelName: xgboost-model initialInstanceCount: 2 instanceType: ml.c5.large models: - name: xgboost-model executionRoleArn: arn:aws:iam::123456789012:role/service-role/AmazonSageMaker-ExecutionRole primaryContainer: xgboost containers: - xgboost containers: - containerHostname: xgboost modelDataUrl: s3://my-bucket/inference/xgboost-mnist/model.tar.gz image: 123456789012.dkr.ecr.us-east-2.amazonaws.com/xgboost:latest
Save the file, then use kubectl
to apply your update as follows.
You should see the status change
from InService
to ReconcilingEndpoint
,
then Updating
.
$ kubectl apply -f hosting.yaml hostingdeployment.sagemaker.aws.amazon.com/host-xgboost configured $ kubectl get hostingdeployments NAME STATUS SAGEMAKER-ENDPOINT-NAME host-xgboost ReconcilingEndpoint host-xgboost-def0e83e0d5f11eaaa450a350abcdef $ kubectl get hostingdeployments NAME STATUS SAGEMAKER-ENDPOINT-NAME host-xgboost Updating host-xgboost-def0e83e0d5f11eaaa450a3507abcdef
Amazon SageMaker deploys a new set of instances with your models,
switches traffic to use the new instances, and drains the old instances.
As soon as this process begins, the status becomes Updating
. After
the update is complete, your endpoint becomes InService
. This
process takes approximately 10 minutes.
Use kubectl
to delete a HostingDeployment with the following
command:
kubectl delete hostingdeployments host-xgboost
Your output should look like the following:
hostingdeployment.sagemaker.aws.amazon.com "host-xgboost" deleted
To verify that the hosting deployment has been deleted, use the following command:
kubectl get hostingdeployments No resources found.
Endpoints that have been deleted do not incur any charges for Amazon SageMaker resources.