client.rs

// Code generated by software.amazon.smithy.rust.codegen.smithy-rs. DO NOT EDIT.
#[derive(Debug)]
pub(crate) struct Handle {
    pub(crate) client: aws_smithy_client::Client<
        aws_smithy_client::erase::DynConnector,
        aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
    >,
    pub(crate) conf: crate::Config,
}

/// Client for AWS Backup
///
/// Client for invoking operations on AWS Backup. Each operation on AWS Backup is a method on this
/// this struct. `.send()` MUST be invoked on the generated operations to dispatch the request to the service.
///
/// # Examples
/// **Constructing a client and invoking an operation**
/// ```rust,no_run
/// # async fn docs() {
///     // create a shared configuration. This can be used & shared between multiple service clients.
///     let shared_config = aws_config::load_from_env().await;
///     let client = aws_sdk_backup::Client::new(&shared_config);
///     // invoke an operation
///     /* let rsp = client
///         .<operation_name>().
///         .<param>("some value")
///         .send().await; */
/// # }
/// ```
/// **Constructing a client with custom configuration**
/// ```rust,no_run
/// use aws_config::RetryConfig;
/// # async fn docs() {
/// let shared_config = aws_config::load_from_env().await;
/// let config = aws_sdk_backup::config::Builder::from(&shared_config)
///   .retry_config(RetryConfig::disabled())
///   .build();
/// let client = aws_sdk_backup::Client::from_conf(config);
/// # }
#[derive(std::fmt::Debug)]
pub struct Client {
    handle: std::sync::Arc<Handle>,
}

impl std::clone::Clone for Client {
    fn clone(&self) -> Self {
        Self {
            handle: self.handle.clone(),
        }
    }
}

#[doc(inline)]
pub use aws_smithy_client::Builder;

impl
    From<
        aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    > for Client
{
    fn from(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
    ) -> Self {
        Self::with_config(client, crate::Config::builder().build())
    }
}

impl Client {
    /// Creates a client with the given service configuration.
    pub fn with_config(
        client: aws_smithy_client::Client<
            aws_smithy_client::erase::DynConnector,
            aws_smithy_client::erase::DynMiddleware<aws_smithy_client::erase::DynConnector>,
        >,
        conf: crate::Config,
    ) -> Self {
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Returns the client's configuration.
    pub fn conf(&self) -> &crate::Config {
        &self.handle.conf
    }
}
impl Client {
    /// Constructs a fluent builder for the [`CreateBackupPlan`](crate::client::fluent_builders::CreateBackupPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan(BackupPlanInput)`](crate::client::fluent_builders::CreateBackupPlan::backup_plan) / [`set_backup_plan(Option<BackupPlanInput>)`](crate::client::fluent_builders::CreateBackupPlan::set_backup_plan): <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
    ///   - [`backup_plan_tags(HashMap<String, String>)`](crate::client::fluent_builders::CreateBackupPlan::backup_plan_tags) / [`set_backup_plan_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::CreateBackupPlan::set_backup_plan_tags): <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair. The specified tags are assigned to all backups created with this plan.</p>
    ///   - [`creator_request_id(impl Into<String>)`](crate::client::fluent_builders::CreateBackupPlan::creator_request_id) / [`set_creator_request_id(Option<String>)`](crate::client::fluent_builders::CreateBackupPlan::set_creator_request_id): <p>Identifies the request and allows failed requests to be retried without the risk of running the operation twice. If the request includes a <code>CreatorRequestId</code> that matches an existing backup plan, that plan is returned. This parameter is optional.</p>  <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
    /// - On success, responds with [`CreateBackupPlanOutput`](crate::output::CreateBackupPlanOutput) with field(s):
    ///   - [`backup_plan_id(Option<String>)`](crate::output::CreateBackupPlanOutput::backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`backup_plan_arn(Option<String>)`](crate::output::CreateBackupPlanOutput::backup_plan_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup plan; for example, <code>arn:aws:backup:us-east-1:123456789012:plan:8F81F553-3A74-4A3F-B93D-B3360DC80C50</code>.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::CreateBackupPlanOutput::creation_date): <p>The date and time that a backup plan is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`version_id(Option<String>)`](crate::output::CreateBackupPlanOutput::version_id): <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. They cannot be edited.</p>
    ///   - [`advanced_backup_settings(Option<Vec<AdvancedBackupSetting>>)`](crate::output::CreateBackupPlanOutput::advanced_backup_settings): <p>A list of <code>BackupOptions</code> settings for a resource type. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>
    /// - On failure, responds with [`SdkError<CreateBackupPlanError>`](crate::error::CreateBackupPlanError)
    pub fn create_backup_plan(&self) -> fluent_builders::CreateBackupPlan {
        fluent_builders::CreateBackupPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`CreateBackupSelection`](crate::client::fluent_builders::CreateBackupSelection) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::CreateBackupSelection::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::CreateBackupSelection::set_backup_plan_id): <p>Uniquely identifies the backup plan to be associated with the selection of resources.</p>
    ///   - [`backup_selection(BackupSelection)`](crate::client::fluent_builders::CreateBackupSelection::backup_selection) / [`set_backup_selection(Option<BackupSelection>)`](crate::client::fluent_builders::CreateBackupSelection::set_backup_selection): <p>Specifies the body of a request to assign a set of resources to a backup plan.</p>
    ///   - [`creator_request_id(impl Into<String>)`](crate::client::fluent_builders::CreateBackupSelection::creator_request_id) / [`set_creator_request_id(Option<String>)`](crate::client::fluent_builders::CreateBackupSelection::set_creator_request_id): <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. This parameter is optional.</p>  <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
    /// - On success, responds with [`CreateBackupSelectionOutput`](crate::output::CreateBackupSelectionOutput) with field(s):
    ///   - [`selection_id(Option<String>)`](crate::output::CreateBackupSelectionOutput::selection_id): <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
    ///   - [`backup_plan_id(Option<String>)`](crate::output::CreateBackupSelectionOutput::backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::CreateBackupSelectionOutput::creation_date): <p>The date and time a backup selection is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<CreateBackupSelectionError>`](crate::error::CreateBackupSelectionError)
    pub fn create_backup_selection(&self) -> fluent_builders::CreateBackupSelection {
        fluent_builders::CreateBackupSelection::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`CreateBackupVault`](crate::client::fluent_builders::CreateBackupVault) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::CreateBackupVault::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::CreateBackupVault::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_tags(HashMap<String, String>)`](crate::client::fluent_builders::CreateBackupVault::backup_vault_tags) / [`set_backup_vault_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::CreateBackupVault::set_backup_vault_tags): <p>Metadata that you can assign to help organize the resources that you create. Each tag is a key-value pair.</p>
    ///   - [`encryption_key_arn(impl Into<String>)`](crate::client::fluent_builders::CreateBackupVault::encryption_key_arn) / [`set_encryption_key_arn(Option<String>)`](crate::client::fluent_builders::CreateBackupVault::set_encryption_key_arn): <p>The server-side encryption key that is used to protect your backups; for example, <code>arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code>.</p>
    ///   - [`creator_request_id(impl Into<String>)`](crate::client::fluent_builders::CreateBackupVault::creator_request_id) / [`set_creator_request_id(Option<String>)`](crate::client::fluent_builders::CreateBackupVault::set_creator_request_id): <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. This parameter is optional.</p>  <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
    /// - On success, responds with [`CreateBackupVaultOutput`](crate::output::CreateBackupVaultOutput) with field(s):
    ///   - [`backup_vault_name(Option<String>)`](crate::output::CreateBackupVaultOutput::backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::CreateBackupVaultOutput::backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::CreateBackupVaultOutput::creation_date): <p>The date and time a backup vault is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<CreateBackupVaultError>`](crate::error::CreateBackupVaultError)
    pub fn create_backup_vault(&self) -> fluent_builders::CreateBackupVault {
        fluent_builders::CreateBackupVault::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`CreateFramework`](crate::client::fluent_builders::CreateFramework) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`framework_name(impl Into<String>)`](crate::client::fluent_builders::CreateFramework::framework_name) / [`set_framework_name(Option<String>)`](crate::client::fluent_builders::CreateFramework::set_framework_name): <p>The unique name of the framework. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
    ///   - [`framework_description(impl Into<String>)`](crate::client::fluent_builders::CreateFramework::framework_description) / [`set_framework_description(Option<String>)`](crate::client::fluent_builders::CreateFramework::set_framework_description): <p>An optional description of the framework with a maximum of 1,024 characters.</p>
    ///   - [`framework_controls(Vec<FrameworkControl>)`](crate::client::fluent_builders::CreateFramework::framework_controls) / [`set_framework_controls(Option<Vec<FrameworkControl>>)`](crate::client::fluent_builders::CreateFramework::set_framework_controls): <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::CreateFramework::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::CreateFramework::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>CreateFrameworkInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    ///   - [`framework_tags(HashMap<String, String>)`](crate::client::fluent_builders::CreateFramework::framework_tags) / [`set_framework_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::CreateFramework::set_framework_tags): <p>Metadata that you can assign to help organize the frameworks that you create. Each tag is a key-value pair.</p>
    /// - On success, responds with [`CreateFrameworkOutput`](crate::output::CreateFrameworkOutput) with field(s):
    ///   - [`framework_name(Option<String>)`](crate::output::CreateFrameworkOutput::framework_name): <p>The unique name of the framework. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
    ///   - [`framework_arn(Option<String>)`](crate::output::CreateFrameworkOutput::framework_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    /// - On failure, responds with [`SdkError<CreateFrameworkError>`](crate::error::CreateFrameworkError)
    pub fn create_framework(&self) -> fluent_builders::CreateFramework {
        fluent_builders::CreateFramework::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`CreateReportPlan`](crate::client::fluent_builders::CreateReportPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`report_plan_name(impl Into<String>)`](crate::client::fluent_builders::CreateReportPlan::report_plan_name) / [`set_report_plan_name(Option<String>)`](crate::client::fluent_builders::CreateReportPlan::set_report_plan_name): <p>The unique name of the report plan. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
    ///   - [`report_plan_description(impl Into<String>)`](crate::client::fluent_builders::CreateReportPlan::report_plan_description) / [`set_report_plan_description(Option<String>)`](crate::client::fluent_builders::CreateReportPlan::set_report_plan_description): <p>An optional description of the report plan with a maximum of 1,024 characters.</p>
    ///   - [`report_delivery_channel(ReportDeliveryChannel)`](crate::client::fluent_builders::CreateReportPlan::report_delivery_channel) / [`set_report_delivery_channel(Option<ReportDeliveryChannel>)`](crate::client::fluent_builders::CreateReportPlan::set_report_delivery_channel): <p>A structure that contains information about where and how to deliver your reports, specifically your Amazon S3 bucket name, S3 key prefix, and the formats of your reports.</p>
    ///   - [`report_setting(ReportSetting)`](crate::client::fluent_builders::CreateReportPlan::report_setting) / [`set_report_setting(Option<ReportSetting>)`](crate::client::fluent_builders::CreateReportPlan::set_report_setting): <p>Identifies the report template for the report. Reports are built using a report template. The report templates are:</p>  <p> <code>RESOURCE_COMPLIANCE_REPORT | CONTROL_COMPLIANCE_REPORT | BACKUP_JOB_REPORT | COPY_JOB_REPORT | RESTORE_JOB_REPORT</code> </p>  <p>If the report template is <code>RESOURCE_COMPLIANCE_REPORT</code> or <code>CONTROL_COMPLIANCE_REPORT</code>, this API resource also describes the report coverage by Amazon Web Services Regions and frameworks.</p>
    ///   - [`report_plan_tags(HashMap<String, String>)`](crate::client::fluent_builders::CreateReportPlan::report_plan_tags) / [`set_report_plan_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::CreateReportPlan::set_report_plan_tags): <p>Metadata that you can assign to help organize the report plans that you create. Each tag is a key-value pair.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::CreateReportPlan::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::CreateReportPlan::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>CreateReportPlanInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    /// - On success, responds with [`CreateReportPlanOutput`](crate::output::CreateReportPlanOutput) with field(s):
    ///   - [`report_plan_name(Option<String>)`](crate::output::CreateReportPlanOutput::report_plan_name): <p>The unique name of the report plan.</p>
    ///   - [`report_plan_arn(Option<String>)`](crate::output::CreateReportPlanOutput::report_plan_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`creation_time(Option<DateTime>)`](crate::output::CreateReportPlanOutput::creation_time): <p>The date and time a backup vault is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<CreateReportPlanError>`](crate::error::CreateReportPlanError)
    pub fn create_report_plan(&self) -> fluent_builders::CreateReportPlan {
        fluent_builders::CreateReportPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteBackupPlan`](crate::client::fluent_builders::DeleteBackupPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupPlan::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::DeleteBackupPlan::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    /// - On success, responds with [`DeleteBackupPlanOutput`](crate::output::DeleteBackupPlanOutput) with field(s):
    ///   - [`backup_plan_id(Option<String>)`](crate::output::DeleteBackupPlanOutput::backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`backup_plan_arn(Option<String>)`](crate::output::DeleteBackupPlanOutput::backup_plan_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup plan; for example, <code>arn:aws:backup:us-east-1:123456789012:plan:8F81F553-3A74-4A3F-B93D-B3360DC80C50</code>.</p>
    ///   - [`deletion_date(Option<DateTime>)`](crate::output::DeleteBackupPlanOutput::deletion_date): <p>The date and time a backup plan is deleted, in Unix format and Coordinated Universal Time (UTC). The value of <code>DeletionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`version_id(Option<String>)`](crate::output::DeleteBackupPlanOutput::version_id): <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. Version IDs cannot be edited.</p>
    /// - On failure, responds with [`SdkError<DeleteBackupPlanError>`](crate::error::DeleteBackupPlanError)
    pub fn delete_backup_plan(&self) -> fluent_builders::DeleteBackupPlan {
        fluent_builders::DeleteBackupPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteBackupSelection`](crate::client::fluent_builders::DeleteBackupSelection) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupSelection::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::DeleteBackupSelection::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`selection_id(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupSelection::selection_id) / [`set_selection_id(Option<String>)`](crate::client::fluent_builders::DeleteBackupSelection::set_selection_id): <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
    /// - On success, responds with [`DeleteBackupSelectionOutput`](crate::output::DeleteBackupSelectionOutput)

    /// - On failure, responds with [`SdkError<DeleteBackupSelectionError>`](crate::error::DeleteBackupSelectionError)
    pub fn delete_backup_selection(&self) -> fluent_builders::DeleteBackupSelection {
        fluent_builders::DeleteBackupSelection::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteBackupVault`](crate::client::fluent_builders::DeleteBackupVault) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupVault::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DeleteBackupVault::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    /// - On success, responds with [`DeleteBackupVaultOutput`](crate::output::DeleteBackupVaultOutput)

    /// - On failure, responds with [`SdkError<DeleteBackupVaultError>`](crate::error::DeleteBackupVaultError)
    pub fn delete_backup_vault(&self) -> fluent_builders::DeleteBackupVault {
        fluent_builders::DeleteBackupVault::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteBackupVaultAccessPolicy`](crate::client::fluent_builders::DeleteBackupVaultAccessPolicy) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupVaultAccessPolicy::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DeleteBackupVaultAccessPolicy::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    /// - On success, responds with [`DeleteBackupVaultAccessPolicyOutput`](crate::output::DeleteBackupVaultAccessPolicyOutput)

    /// - On failure, responds with [`SdkError<DeleteBackupVaultAccessPolicyError>`](crate::error::DeleteBackupVaultAccessPolicyError)
    pub fn delete_backup_vault_access_policy(
        &self,
    ) -> fluent_builders::DeleteBackupVaultAccessPolicy {
        fluent_builders::DeleteBackupVaultAccessPolicy::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteBackupVaultLockConfiguration`](crate::client::fluent_builders::DeleteBackupVaultLockConfiguration) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupVaultLockConfiguration::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DeleteBackupVaultLockConfiguration::set_backup_vault_name): <p>The name of the backup vault from which to delete Backup Vault Lock.</p>
    /// - On success, responds with [`DeleteBackupVaultLockConfigurationOutput`](crate::output::DeleteBackupVaultLockConfigurationOutput)

    /// - On failure, responds with [`SdkError<DeleteBackupVaultLockConfigurationError>`](crate::error::DeleteBackupVaultLockConfigurationError)
    pub fn delete_backup_vault_lock_configuration(
        &self,
    ) -> fluent_builders::DeleteBackupVaultLockConfiguration {
        fluent_builders::DeleteBackupVaultLockConfiguration::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteBackupVaultNotifications`](crate::client::fluent_builders::DeleteBackupVaultNotifications) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DeleteBackupVaultNotifications::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DeleteBackupVaultNotifications::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    /// - On success, responds with [`DeleteBackupVaultNotificationsOutput`](crate::output::DeleteBackupVaultNotificationsOutput)

    /// - On failure, responds with [`SdkError<DeleteBackupVaultNotificationsError>`](crate::error::DeleteBackupVaultNotificationsError)
    pub fn delete_backup_vault_notifications(
        &self,
    ) -> fluent_builders::DeleteBackupVaultNotifications {
        fluent_builders::DeleteBackupVaultNotifications::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteFramework`](crate::client::fluent_builders::DeleteFramework) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`framework_name(impl Into<String>)`](crate::client::fluent_builders::DeleteFramework::framework_name) / [`set_framework_name(Option<String>)`](crate::client::fluent_builders::DeleteFramework::set_framework_name): <p>The unique name of a framework.</p>
    /// - On success, responds with [`DeleteFrameworkOutput`](crate::output::DeleteFrameworkOutput)

    /// - On failure, responds with [`SdkError<DeleteFrameworkError>`](crate::error::DeleteFrameworkError)
    pub fn delete_framework(&self) -> fluent_builders::DeleteFramework {
        fluent_builders::DeleteFramework::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteRecoveryPoint`](crate::client::fluent_builders::DeleteRecoveryPoint) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DeleteRecoveryPoint::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DeleteRecoveryPoint::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::DeleteRecoveryPoint::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::DeleteRecoveryPoint::set_recovery_point_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    /// - On success, responds with [`DeleteRecoveryPointOutput`](crate::output::DeleteRecoveryPointOutput)

    /// - On failure, responds with [`SdkError<DeleteRecoveryPointError>`](crate::error::DeleteRecoveryPointError)
    pub fn delete_recovery_point(&self) -> fluent_builders::DeleteRecoveryPoint {
        fluent_builders::DeleteRecoveryPoint::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DeleteReportPlan`](crate::client::fluent_builders::DeleteReportPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`report_plan_name(impl Into<String>)`](crate::client::fluent_builders::DeleteReportPlan::report_plan_name) / [`set_report_plan_name(Option<String>)`](crate::client::fluent_builders::DeleteReportPlan::set_report_plan_name): <p>The unique name of a report plan.</p>
    /// - On success, responds with [`DeleteReportPlanOutput`](crate::output::DeleteReportPlanOutput)

    /// - On failure, responds with [`SdkError<DeleteReportPlanError>`](crate::error::DeleteReportPlanError)
    pub fn delete_report_plan(&self) -> fluent_builders::DeleteReportPlan {
        fluent_builders::DeleteReportPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeBackupJob`](crate::client::fluent_builders::DescribeBackupJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_job_id(impl Into<String>)`](crate::client::fluent_builders::DescribeBackupJob::backup_job_id) / [`set_backup_job_id(Option<String>)`](crate::client::fluent_builders::DescribeBackupJob::set_backup_job_id): <p>Uniquely identifies a request to Backup to back up a resource.</p>
    /// - On success, responds with [`DescribeBackupJobOutput`](crate::output::DescribeBackupJobOutput) with field(s):
    ///   - [`account_id(Option<String>)`](crate::output::DescribeBackupJobOutput::account_id): <p>Returns the account ID that owns the backup job.</p>
    ///   - [`backup_job_id(Option<String>)`](crate::output::DescribeBackupJobOutput::backup_job_id): <p>Uniquely identifies a request to Backup to back up a resource.</p>
    ///   - [`backup_vault_name(Option<String>)`](crate::output::DescribeBackupJobOutput::backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::DescribeBackupJobOutput::backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`recovery_point_arn(Option<String>)`](crate::output::DescribeBackupJobOutput::recovery_point_arn): <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`resource_arn(Option<String>)`](crate::output::DescribeBackupJobOutput::resource_arn): <p>An ARN that uniquely identifies a saved resource. The format of the ARN depends on the resource type.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::DescribeBackupJobOutput::creation_date): <p>The date and time that a backup job is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`completion_date(Option<DateTime>)`](crate::output::DescribeBackupJobOutput::completion_date): <p>The date and time that a job to create a backup job is completed, in Unix format and Coordinated Universal Time (UTC). The value of <code>CompletionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`state(Option<BackupJobState>)`](crate::output::DescribeBackupJobOutput::state): <p>The current state of a resource recovery point.</p>
    ///   - [`status_message(Option<String>)`](crate::output::DescribeBackupJobOutput::status_message): <p>A detailed message explaining the status of the job to back up a resource.</p>
    ///   - [`percent_done(Option<String>)`](crate::output::DescribeBackupJobOutput::percent_done): <p>Contains an estimated percentage that is complete of a job at the time the job status was queried.</p>
    ///   - [`backup_size_in_bytes(Option<i64>)`](crate::output::DescribeBackupJobOutput::backup_size_in_bytes): <p>The size, in bytes, of a backup.</p>
    ///   - [`iam_role_arn(Option<String>)`](crate::output::DescribeBackupJobOutput::iam_role_arn): <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    ///   - [`created_by(Option<RecoveryPointCreator>)`](crate::output::DescribeBackupJobOutput::created_by): <p>Contains identifying information about the creation of a backup job, including the <code>BackupPlanArn</code>, <code>BackupPlanId</code>, <code>BackupPlanVersion</code>, and <code>BackupRuleId</code> of the backup plan that is used to create it.</p>
    ///   - [`resource_type(Option<String>)`](crate::output::DescribeBackupJobOutput::resource_type): <p>The type of Amazon Web Services resource to be backed up; for example, an Amazon Elastic Block Store (Amazon EBS) volume or an Amazon Relational Database Service (Amazon RDS) database.</p>
    ///   - [`bytes_transferred(Option<i64>)`](crate::output::DescribeBackupJobOutput::bytes_transferred): <p>The size in bytes transferred to a backup vault at the time that the job status was queried.</p>
    ///   - [`expected_completion_date(Option<DateTime>)`](crate::output::DescribeBackupJobOutput::expected_completion_date): <p>The date and time that a job to back up resources is expected to be completed, in Unix format and Coordinated Universal Time (UTC). The value of <code>ExpectedCompletionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`start_by(Option<DateTime>)`](crate::output::DescribeBackupJobOutput::start_by): <p>Specifies the time in Unix format and Coordinated Universal Time (UTC) when a backup job must be started before it is canceled. The value is calculated by adding the start window to the scheduled time. So if the scheduled time were 6:00 PM and the start window is 2 hours, the <code>StartBy</code> time would be 8:00 PM on the date specified. The value of <code>StartBy</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`backup_options(Option<HashMap<String, String>>)`](crate::output::DescribeBackupJobOutput::backup_options): <p>Represents the options specified as part of backup plan or on-demand backup job.</p>
    ///   - [`backup_type(Option<String>)`](crate::output::DescribeBackupJobOutput::backup_type): <p>Represents the actual backup type selected for a backup job. For example, if a successful Windows Volume Shadow Copy Service (VSS) backup was taken, <code>BackupType</code> returns <code>"WindowsVSS"</code>. If <code>BackupType</code> is empty, then the backup type was a regular backup.</p>
    /// - On failure, responds with [`SdkError<DescribeBackupJobError>`](crate::error::DescribeBackupJobError)
    pub fn describe_backup_job(&self) -> fluent_builders::DescribeBackupJob {
        fluent_builders::DescribeBackupJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeBackupVault`](crate::client::fluent_builders::DescribeBackupVault) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DescribeBackupVault::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DescribeBackupVault::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    /// - On success, responds with [`DescribeBackupVaultOutput`](crate::output::DescribeBackupVaultOutput) with field(s):
    ///   - [`backup_vault_name(Option<String>)`](crate::output::DescribeBackupVaultOutput::backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::DescribeBackupVaultOutput::backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`encryption_key_arn(Option<String>)`](crate::output::DescribeBackupVaultOutput::encryption_key_arn): <p>The server-side encryption key that is used to protect your backups; for example, <code>arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code>.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::DescribeBackupVaultOutput::creation_date): <p>The date and time that a backup vault is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`creator_request_id(Option<String>)`](crate::output::DescribeBackupVaultOutput::creator_request_id): <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice.</p>
    ///   - [`number_of_recovery_points(i64)`](crate::output::DescribeBackupVaultOutput::number_of_recovery_points): <p>The number of recovery points that are stored in a backup vault.</p>
    ///   - [`locked(Option<bool>)`](crate::output::DescribeBackupVaultOutput::locked): <p>A Boolean that indicates whether Backup Vault Lock is currently protecting the backup vault. <code>True</code> means that Vault Lock causes delete or update operations on the recovery points stored in the vault to fail.</p>
    ///   - [`min_retention_days(Option<i64>)`](crate::output::DescribeBackupVaultOutput::min_retention_days): <p>The Backup Vault Lock setting that specifies the minimum retention period that the vault retains its recovery points. If this parameter is not specified, Vault Lock does not enforce a minimum retention period.</p>  <p>If specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or longer than the minimum retention period. If the job's retention period is shorter than that minimum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault. Recovery points already stored in the vault prior to Vault Lock are not affected.</p>
    ///   - [`max_retention_days(Option<i64>)`](crate::output::DescribeBackupVaultOutput::max_retention_days): <p>The Backup Vault Lock setting that specifies the maximum retention period that the vault retains its recovery points. If this parameter is not specified, Vault Lock does not enforce a maximum retention period on the recovery points in the vault (allowing indefinite storage).</p>  <p>If specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or shorter than the maximum retention period. If the job's retention period is longer than that maximum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault. Recovery points already stored in the vault prior to Vault Lock are not affected.</p>
    ///   - [`lock_date(Option<DateTime>)`](crate::output::DescribeBackupVaultOutput::lock_date): <p>The date and time when Backup Vault Lock configuration cannot be changed or deleted.</p>  <p>If you applied Vault Lock to your vault without specifying a lock date, you can change any of your Vault Lock settings, or delete Vault Lock from the vault entirely, at any time.</p>  <p>This value is in Unix format, Coordinated Universal Time (UTC), and accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<DescribeBackupVaultError>`](crate::error::DescribeBackupVaultError)
    pub fn describe_backup_vault(&self) -> fluent_builders::DescribeBackupVault {
        fluent_builders::DescribeBackupVault::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeCopyJob`](crate::client::fluent_builders::DescribeCopyJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`copy_job_id(impl Into<String>)`](crate::client::fluent_builders::DescribeCopyJob::copy_job_id) / [`set_copy_job_id(Option<String>)`](crate::client::fluent_builders::DescribeCopyJob::set_copy_job_id): <p>Uniquely identifies a copy job.</p>
    /// - On success, responds with [`DescribeCopyJobOutput`](crate::output::DescribeCopyJobOutput) with field(s):
    ///   - [`copy_job(Option<CopyJob>)`](crate::output::DescribeCopyJobOutput::copy_job): <p>Contains detailed information about a copy job.</p>
    /// - On failure, responds with [`SdkError<DescribeCopyJobError>`](crate::error::DescribeCopyJobError)
    pub fn describe_copy_job(&self) -> fluent_builders::DescribeCopyJob {
        fluent_builders::DescribeCopyJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeFramework`](crate::client::fluent_builders::DescribeFramework) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`framework_name(impl Into<String>)`](crate::client::fluent_builders::DescribeFramework::framework_name) / [`set_framework_name(Option<String>)`](crate::client::fluent_builders::DescribeFramework::set_framework_name): <p>The unique name of a framework.</p>
    /// - On success, responds with [`DescribeFrameworkOutput`](crate::output::DescribeFrameworkOutput) with field(s):
    ///   - [`framework_name(Option<String>)`](crate::output::DescribeFrameworkOutput::framework_name): <p>The unique name of a framework.</p>
    ///   - [`framework_arn(Option<String>)`](crate::output::DescribeFrameworkOutput::framework_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`framework_description(Option<String>)`](crate::output::DescribeFrameworkOutput::framework_description): <p>An optional description of the framework.</p>
    ///   - [`framework_controls(Option<Vec<FrameworkControl>>)`](crate::output::DescribeFrameworkOutput::framework_controls): <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
    ///   - [`creation_time(Option<DateTime>)`](crate::output::DescribeFrameworkOutput::creation_time): <p>The date and time that a framework is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`deployment_status(Option<String>)`](crate::output::DescribeFrameworkOutput::deployment_status): <p>The deployment status of a framework. The statuses are:</p>  <p> <code>CREATE_IN_PROGRESS | UPDATE_IN_PROGRESS | DELETE_IN_PROGRESS | COMPLETED | FAILED</code> </p>
    ///   - [`framework_status(Option<String>)`](crate::output::DescribeFrameworkOutput::framework_status): <p>A framework consists of one or more controls. Each control governs a resource, such as backup plans, backup selections, backup vaults, or recovery points. You can also turn Config recording on or off for each resource. The statuses are:</p>  <ul>   <li> <p> <code>ACTIVE</code> when recording is turned on for all resources governed by the framework.</p> </li>   <li> <p> <code>PARTIALLY_ACTIVE</code> when recording is turned off for at least one resource governed by the framework.</p> </li>   <li> <p> <code>INACTIVE</code> when recording is turned off for all resources governed by the framework.</p> </li>   <li> <p> <code>UNAVAILABLE</code> when Backup is unable to validate recording status at this time.</p> </li>  </ul>
    ///   - [`idempotency_token(Option<String>)`](crate::output::DescribeFrameworkOutput::idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>DescribeFrameworkOutput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    /// - On failure, responds with [`SdkError<DescribeFrameworkError>`](crate::error::DescribeFrameworkError)
    pub fn describe_framework(&self) -> fluent_builders::DescribeFramework {
        fluent_builders::DescribeFramework::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeGlobalSettings`](crate::client::fluent_builders::DescribeGlobalSettings) operation.
    ///
    /// - The fluent builder takes no input, just [`send`](crate::client::fluent_builders::DescribeGlobalSettings::send) it.

    /// - On success, responds with [`DescribeGlobalSettingsOutput`](crate::output::DescribeGlobalSettingsOutput) with field(s):
    ///   - [`global_settings(Option<HashMap<String, String>>)`](crate::output::DescribeGlobalSettingsOutput::global_settings): <p>The status of the flag <code>isCrossAccountBackupEnabled</code>.</p>
    ///   - [`last_update_time(Option<DateTime>)`](crate::output::DescribeGlobalSettingsOutput::last_update_time): <p>The date and time that the flag <code>isCrossAccountBackupEnabled</code> was last updated. This update is in Unix format and Coordinated Universal Time (UTC). The value of <code>LastUpdateTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<DescribeGlobalSettingsError>`](crate::error::DescribeGlobalSettingsError)
    pub fn describe_global_settings(&self) -> fluent_builders::DescribeGlobalSettings {
        fluent_builders::DescribeGlobalSettings::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeProtectedResource`](crate::client::fluent_builders::DescribeProtectedResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::DescribeProtectedResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::DescribeProtectedResource::set_resource_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    /// - On success, responds with [`DescribeProtectedResourceOutput`](crate::output::DescribeProtectedResourceOutput) with field(s):
    ///   - [`resource_arn(Option<String>)`](crate::output::DescribeProtectedResourceOutput::resource_arn): <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`resource_type(Option<String>)`](crate::output::DescribeProtectedResourceOutput::resource_type): <p>The type of Amazon Web Services resource saved as a recovery point; for example, an Amazon EBS volume or an Amazon RDS database.</p>
    ///   - [`last_backup_time(Option<DateTime>)`](crate::output::DescribeProtectedResourceOutput::last_backup_time): <p>The date and time that a resource was last backed up, in Unix format and Coordinated Universal Time (UTC). The value of <code>LastBackupTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<DescribeProtectedResourceError>`](crate::error::DescribeProtectedResourceError)
    pub fn describe_protected_resource(&self) -> fluent_builders::DescribeProtectedResource {
        fluent_builders::DescribeProtectedResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeRecoveryPoint`](crate::client::fluent_builders::DescribeRecoveryPoint) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DescribeRecoveryPoint::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DescribeRecoveryPoint::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::DescribeRecoveryPoint::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::DescribeRecoveryPoint::set_recovery_point_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    /// - On success, responds with [`DescribeRecoveryPointOutput`](crate::output::DescribeRecoveryPointOutput) with field(s):
    ///   - [`recovery_point_arn(Option<String>)`](crate::output::DescribeRecoveryPointOutput::recovery_point_arn): <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`backup_vault_name(Option<String>)`](crate::output::DescribeRecoveryPointOutput::backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::DescribeRecoveryPointOutput::backup_vault_arn): <p>An ARN that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`source_backup_vault_arn(Option<String>)`](crate::output::DescribeRecoveryPointOutput::source_backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies the source vault where the resource was originally backed up in; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:BackupVault</code>. If the recovery is restored to the same Amazon Web Services account or Region, this value will be <code>null</code>.</p>
    ///   - [`resource_arn(Option<String>)`](crate::output::DescribeRecoveryPointOutput::resource_arn): <p>An ARN that uniquely identifies a saved resource. The format of the ARN depends on the resource type.</p>
    ///   - [`resource_type(Option<String>)`](crate::output::DescribeRecoveryPointOutput::resource_type): <p>The type of Amazon Web Services resource to save as a recovery point; for example, an Amazon Elastic Block Store (Amazon EBS) volume or an Amazon Relational Database Service (Amazon RDS) database.</p>
    ///   - [`created_by(Option<RecoveryPointCreator>)`](crate::output::DescribeRecoveryPointOutput::created_by): <p>Contains identifying information about the creation of a recovery point, including the <code>BackupPlanArn</code>, <code>BackupPlanId</code>, <code>BackupPlanVersion</code>, and <code>BackupRuleId</code> of the backup plan used to create it.</p>
    ///   - [`iam_role_arn(Option<String>)`](crate::output::DescribeRecoveryPointOutput::iam_role_arn): <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    ///   - [`status(Option<RecoveryPointStatus>)`](crate::output::DescribeRecoveryPointOutput::status): <p>A status code specifying the state of the recovery point.</p>  <p> <code>PARTIAL</code> status indicates Backup could not create the recovery point before the backup window closed. To increase your backup plan window using the API, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/API_UpdateBackupPlan.html">UpdateBackupPlan</a>. You can also increase your backup plan window using the Console by choosing and editing your backup plan.</p>  <p> <code>EXPIRED</code> status indicates that the recovery point has exceeded its retention period, but Backup lacks permission or is otherwise unable to delete it. To manually delete these recovery points, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/gs-cleanup-resources.html#cleanup-backups"> Step 3: Delete the recovery points</a> in the <i>Clean up resources</i> section of <i>Getting started</i>.</p>
    ///   - [`status_message(Option<String>)`](crate::output::DescribeRecoveryPointOutput::status_message): <p>A status message explaining the reason for the recovery point deletion failure.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::DescribeRecoveryPointOutput::creation_date): <p>The date and time that a recovery point is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`completion_date(Option<DateTime>)`](crate::output::DescribeRecoveryPointOutput::completion_date): <p>The date and time that a job to create a recovery point is completed, in Unix format and Coordinated Universal Time (UTC). The value of <code>CompletionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`backup_size_in_bytes(Option<i64>)`](crate::output::DescribeRecoveryPointOutput::backup_size_in_bytes): <p>The size, in bytes, of a backup.</p>
    ///   - [`calculated_lifecycle(Option<CalculatedLifecycle>)`](crate::output::DescribeRecoveryPointOutput::calculated_lifecycle): <p>A <code>CalculatedLifecycle</code> object containing <code>DeleteAt</code> and <code>MoveToColdStorageAt</code> timestamps.</p>
    ///   - [`lifecycle(Option<Lifecycle>)`](crate::output::DescribeRecoveryPointOutput::lifecycle): <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup transitions and expires backups automatically according to the lifecycle that you define.</p>  <p>Backups that are transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>  <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    ///   - [`encryption_key_arn(Option<String>)`](crate::output::DescribeRecoveryPointOutput::encryption_key_arn): <p>The server-side encryption key used to protect your backups; for example, <code>arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code>.</p>
    ///   - [`is_encrypted(bool)`](crate::output::DescribeRecoveryPointOutput::is_encrypted): <p>A Boolean value that is returned as <code>TRUE</code> if the specified recovery point is encrypted, or <code>FALSE</code> if the recovery point is not encrypted.</p>
    ///   - [`storage_class(Option<StorageClass>)`](crate::output::DescribeRecoveryPointOutput::storage_class): <p>Specifies the storage class of the recovery point. Valid values are <code>WARM</code> or <code>COLD</code>.</p>
    ///   - [`last_restore_time(Option<DateTime>)`](crate::output::DescribeRecoveryPointOutput::last_restore_time): <p>The date and time that a recovery point was last restored, in Unix format and Coordinated Universal Time (UTC). The value of <code>LastRestoreTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<DescribeRecoveryPointError>`](crate::error::DescribeRecoveryPointError)
    pub fn describe_recovery_point(&self) -> fluent_builders::DescribeRecoveryPoint {
        fluent_builders::DescribeRecoveryPoint::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeRegionSettings`](crate::client::fluent_builders::DescribeRegionSettings) operation.
    ///
    /// - The fluent builder takes no input, just [`send`](crate::client::fluent_builders::DescribeRegionSettings::send) it.

    /// - On success, responds with [`DescribeRegionSettingsOutput`](crate::output::DescribeRegionSettingsOutput) with field(s):
    ///   - [`resource_type_opt_in_preference(Option<HashMap<String, bool>>)`](crate::output::DescribeRegionSettingsOutput::resource_type_opt_in_preference): <p>Returns a list of all services along with the opt-in preferences in the Region.</p>
    ///   - [`resource_type_management_preference(Option<HashMap<String, bool>>)`](crate::output::DescribeRegionSettingsOutput::resource_type_management_preference): <p>Returns whether Backup fully manages the backups for a resource type.</p>  <p>For the benefits of full Backup management, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#full-management"> Full Backup management</a>.</p>  <p>For a list of resource types and whether each supports full Backup management, see the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table.</p>  <p>If <code>"DynamoDB":false</code>, you can enable full Backup management for DynamoDB backup by enabling <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html#advanced-ddb-backup-enable-cli"> Backup's advanced DynamoDB backup features</a>.</p>
    /// - On failure, responds with [`SdkError<DescribeRegionSettingsError>`](crate::error::DescribeRegionSettingsError)
    pub fn describe_region_settings(&self) -> fluent_builders::DescribeRegionSettings {
        fluent_builders::DescribeRegionSettings::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeReportJob`](crate::client::fluent_builders::DescribeReportJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`report_job_id(impl Into<String>)`](crate::client::fluent_builders::DescribeReportJob::report_job_id) / [`set_report_job_id(Option<String>)`](crate::client::fluent_builders::DescribeReportJob::set_report_job_id): <p>The identifier of the report job. A unique, randomly generated, Unicode, UTF-8 encoded string that is at most 1,024 bytes long. The report job ID cannot be edited.</p>
    /// - On success, responds with [`DescribeReportJobOutput`](crate::output::DescribeReportJobOutput) with field(s):
    ///   - [`report_job(Option<ReportJob>)`](crate::output::DescribeReportJobOutput::report_job): <p>A list of information about a report job, including its completion and creation times, report destination, unique report job ID, Amazon Resource Name (ARN), report template, status, and status message.</p>
    /// - On failure, responds with [`SdkError<DescribeReportJobError>`](crate::error::DescribeReportJobError)
    pub fn describe_report_job(&self) -> fluent_builders::DescribeReportJob {
        fluent_builders::DescribeReportJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeReportPlan`](crate::client::fluent_builders::DescribeReportPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`report_plan_name(impl Into<String>)`](crate::client::fluent_builders::DescribeReportPlan::report_plan_name) / [`set_report_plan_name(Option<String>)`](crate::client::fluent_builders::DescribeReportPlan::set_report_plan_name): <p>The unique name of a report plan.</p>
    /// - On success, responds with [`DescribeReportPlanOutput`](crate::output::DescribeReportPlanOutput) with field(s):
    ///   - [`report_plan(Option<ReportPlan>)`](crate::output::DescribeReportPlanOutput::report_plan): <p>Returns details about the report plan that is specified by its name. These details include the report plan's Amazon Resource Name (ARN), description, settings, delivery channel, deployment status, creation time, and last attempted and successful run times.</p>
    /// - On failure, responds with [`SdkError<DescribeReportPlanError>`](crate::error::DescribeReportPlanError)
    pub fn describe_report_plan(&self) -> fluent_builders::DescribeReportPlan {
        fluent_builders::DescribeReportPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DescribeRestoreJob`](crate::client::fluent_builders::DescribeRestoreJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`restore_job_id(impl Into<String>)`](crate::client::fluent_builders::DescribeRestoreJob::restore_job_id) / [`set_restore_job_id(Option<String>)`](crate::client::fluent_builders::DescribeRestoreJob::set_restore_job_id): <p>Uniquely identifies the job that restores a recovery point.</p>
    /// - On success, responds with [`DescribeRestoreJobOutput`](crate::output::DescribeRestoreJobOutput) with field(s):
    ///   - [`account_id(Option<String>)`](crate::output::DescribeRestoreJobOutput::account_id): <p>Returns the account ID that owns the restore job.</p>
    ///   - [`restore_job_id(Option<String>)`](crate::output::DescribeRestoreJobOutput::restore_job_id): <p>Uniquely identifies the job that restores a recovery point.</p>
    ///   - [`recovery_point_arn(Option<String>)`](crate::output::DescribeRestoreJobOutput::recovery_point_arn): <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::DescribeRestoreJobOutput::creation_date): <p>The date and time that a restore job is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`completion_date(Option<DateTime>)`](crate::output::DescribeRestoreJobOutput::completion_date): <p>The date and time that a job to restore a recovery point is completed, in Unix format and Coordinated Universal Time (UTC). The value of <code>CompletionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`status(Option<RestoreJobStatus>)`](crate::output::DescribeRestoreJobOutput::status): <p>Status code specifying the state of the job that is initiated by Backup to restore a recovery point.</p>
    ///   - [`status_message(Option<String>)`](crate::output::DescribeRestoreJobOutput::status_message): <p>A message showing the status of a job to restore a recovery point.</p>
    ///   - [`percent_done(Option<String>)`](crate::output::DescribeRestoreJobOutput::percent_done): <p>Contains an estimated percentage that is complete of a job at the time the job status was queried.</p>
    ///   - [`backup_size_in_bytes(Option<i64>)`](crate::output::DescribeRestoreJobOutput::backup_size_in_bytes): <p>The size, in bytes, of the restored resource.</p>
    ///   - [`iam_role_arn(Option<String>)`](crate::output::DescribeRestoreJobOutput::iam_role_arn): <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    ///   - [`expected_completion_time_minutes(Option<i64>)`](crate::output::DescribeRestoreJobOutput::expected_completion_time_minutes): <p>The amount of time in minutes that a job restoring a recovery point is expected to take.</p>
    ///   - [`created_resource_arn(Option<String>)`](crate::output::DescribeRestoreJobOutput::created_resource_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource whose recovery point is being restored. The format of the ARN depends on the resource type of the backed-up resource.</p>
    ///   - [`resource_type(Option<String>)`](crate::output::DescribeRestoreJobOutput::resource_type): <p>Returns metadata associated with a restore job listed by resource type.</p>
    /// - On failure, responds with [`SdkError<DescribeRestoreJobError>`](crate::error::DescribeRestoreJobError)
    pub fn describe_restore_job(&self) -> fluent_builders::DescribeRestoreJob {
        fluent_builders::DescribeRestoreJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`DisassociateRecoveryPoint`](crate::client::fluent_builders::DisassociateRecoveryPoint) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::DisassociateRecoveryPoint::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::DisassociateRecoveryPoint::set_backup_vault_name): <p>The unique name of an Backup vault.</p>
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::DisassociateRecoveryPoint::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::DisassociateRecoveryPoint::set_recovery_point_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies an Backup recovery point.</p>
    /// - On success, responds with [`DisassociateRecoveryPointOutput`](crate::output::DisassociateRecoveryPointOutput)

    /// - On failure, responds with [`SdkError<DisassociateRecoveryPointError>`](crate::error::DisassociateRecoveryPointError)
    pub fn disassociate_recovery_point(&self) -> fluent_builders::DisassociateRecoveryPoint {
        fluent_builders::DisassociateRecoveryPoint::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ExportBackupPlanTemplate`](crate::client::fluent_builders::ExportBackupPlanTemplate) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::ExportBackupPlanTemplate::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::ExportBackupPlanTemplate::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    /// - On success, responds with [`ExportBackupPlanTemplateOutput`](crate::output::ExportBackupPlanTemplateOutput) with field(s):
    ///   - [`backup_plan_template_json(Option<String>)`](crate::output::ExportBackupPlanTemplateOutput::backup_plan_template_json): <p>The body of a backup plan template in JSON format.</p> <note>   <p>This is a signed JSON document that cannot be modified before being passed to <code>GetBackupPlanFromJSON.</code> </p>  </note>
    /// - On failure, responds with [`SdkError<ExportBackupPlanTemplateError>`](crate::error::ExportBackupPlanTemplateError)
    pub fn export_backup_plan_template(&self) -> fluent_builders::ExportBackupPlanTemplate {
        fluent_builders::ExportBackupPlanTemplate::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetBackupPlan`](crate::client::fluent_builders::GetBackupPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::GetBackupPlan::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::GetBackupPlan::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`version_id(impl Into<String>)`](crate::client::fluent_builders::GetBackupPlan::version_id) / [`set_version_id(Option<String>)`](crate::client::fluent_builders::GetBackupPlan::set_version_id): <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. Version IDs cannot be edited.</p>
    /// - On success, responds with [`GetBackupPlanOutput`](crate::output::GetBackupPlanOutput) with field(s):
    ///   - [`backup_plan(Option<BackupPlan>)`](crate::output::GetBackupPlanOutput::backup_plan): <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
    ///   - [`backup_plan_id(Option<String>)`](crate::output::GetBackupPlanOutput::backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`backup_plan_arn(Option<String>)`](crate::output::GetBackupPlanOutput::backup_plan_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup plan; for example, <code>arn:aws:backup:us-east-1:123456789012:plan:8F81F553-3A74-4A3F-B93D-B3360DC80C50</code>.</p>
    ///   - [`version_id(Option<String>)`](crate::output::GetBackupPlanOutput::version_id): <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. Version IDs cannot be edited.</p>
    ///   - [`creator_request_id(Option<String>)`](crate::output::GetBackupPlanOutput::creator_request_id): <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::GetBackupPlanOutput::creation_date): <p>The date and time that a backup plan is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`deletion_date(Option<DateTime>)`](crate::output::GetBackupPlanOutput::deletion_date): <p>The date and time that a backup plan is deleted, in Unix format and Coordinated Universal Time (UTC). The value of <code>DeletionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`last_execution_date(Option<DateTime>)`](crate::output::GetBackupPlanOutput::last_execution_date): <p>The last time a job to back up resources was run with this backup plan. A date and time, in Unix format and Coordinated Universal Time (UTC). The value of <code>LastExecutionDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`advanced_backup_settings(Option<Vec<AdvancedBackupSetting>>)`](crate::output::GetBackupPlanOutput::advanced_backup_settings): <p>Contains a list of <code>BackupOptions</code> for each resource type. The list is populated only if the advanced option is set for the backup plan.</p>
    /// - On failure, responds with [`SdkError<GetBackupPlanError>`](crate::error::GetBackupPlanError)
    pub fn get_backup_plan(&self) -> fluent_builders::GetBackupPlan {
        fluent_builders::GetBackupPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetBackupPlanFromJSON`](crate::client::fluent_builders::GetBackupPlanFromJSON) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_template_json(impl Into<String>)`](crate::client::fluent_builders::GetBackupPlanFromJSON::backup_plan_template_json) / [`set_backup_plan_template_json(Option<String>)`](crate::client::fluent_builders::GetBackupPlanFromJSON::set_backup_plan_template_json): <p>A customer-supplied backup plan document in JSON format.</p>
    /// - On success, responds with [`GetBackupPlanFromJsonOutput`](crate::output::GetBackupPlanFromJsonOutput) with field(s):
    ///   - [`backup_plan(Option<BackupPlan>)`](crate::output::GetBackupPlanFromJsonOutput::backup_plan): <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
    /// - On failure, responds with [`SdkError<GetBackupPlanFromJSONError>`](crate::error::GetBackupPlanFromJSONError)
    pub fn get_backup_plan_from_json(&self) -> fluent_builders::GetBackupPlanFromJSON {
        fluent_builders::GetBackupPlanFromJSON::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetBackupPlanFromTemplate`](crate::client::fluent_builders::GetBackupPlanFromTemplate) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_template_id(impl Into<String>)`](crate::client::fluent_builders::GetBackupPlanFromTemplate::backup_plan_template_id) / [`set_backup_plan_template_id(Option<String>)`](crate::client::fluent_builders::GetBackupPlanFromTemplate::set_backup_plan_template_id): <p>Uniquely identifies a stored backup plan template.</p>
    /// - On success, responds with [`GetBackupPlanFromTemplateOutput`](crate::output::GetBackupPlanFromTemplateOutput) with field(s):
    ///   - [`backup_plan_document(Option<BackupPlan>)`](crate::output::GetBackupPlanFromTemplateOutput::backup_plan_document): <p>Returns the body of a backup plan based on the target template, including the name, rules, and backup vault of the plan.</p>
    /// - On failure, responds with [`SdkError<GetBackupPlanFromTemplateError>`](crate::error::GetBackupPlanFromTemplateError)
    pub fn get_backup_plan_from_template(&self) -> fluent_builders::GetBackupPlanFromTemplate {
        fluent_builders::GetBackupPlanFromTemplate::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetBackupSelection`](crate::client::fluent_builders::GetBackupSelection) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::GetBackupSelection::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::GetBackupSelection::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`selection_id(impl Into<String>)`](crate::client::fluent_builders::GetBackupSelection::selection_id) / [`set_selection_id(Option<String>)`](crate::client::fluent_builders::GetBackupSelection::set_selection_id): <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
    /// - On success, responds with [`GetBackupSelectionOutput`](crate::output::GetBackupSelectionOutput) with field(s):
    ///   - [`backup_selection(Option<BackupSelection>)`](crate::output::GetBackupSelectionOutput::backup_selection): <p>Specifies the body of a request to assign a set of resources to a backup plan.</p>
    ///   - [`selection_id(Option<String>)`](crate::output::GetBackupSelectionOutput::selection_id): <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
    ///   - [`backup_plan_id(Option<String>)`](crate::output::GetBackupSelectionOutput::backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::GetBackupSelectionOutput::creation_date): <p>The date and time a backup selection is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`creator_request_id(Option<String>)`](crate::output::GetBackupSelectionOutput::creator_request_id): <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice.</p>
    /// - On failure, responds with [`SdkError<GetBackupSelectionError>`](crate::error::GetBackupSelectionError)
    pub fn get_backup_selection(&self) -> fluent_builders::GetBackupSelection {
        fluent_builders::GetBackupSelection::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetBackupVaultAccessPolicy`](crate::client::fluent_builders::GetBackupVaultAccessPolicy) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::GetBackupVaultAccessPolicy::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::GetBackupVaultAccessPolicy::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    /// - On success, responds with [`GetBackupVaultAccessPolicyOutput`](crate::output::GetBackupVaultAccessPolicyOutput) with field(s):
    ///   - [`backup_vault_name(Option<String>)`](crate::output::GetBackupVaultAccessPolicyOutput::backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::GetBackupVaultAccessPolicyOutput::backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`policy(Option<String>)`](crate::output::GetBackupVaultAccessPolicyOutput::policy): <p>The backup vault access policy document in JSON format.</p>
    /// - On failure, responds with [`SdkError<GetBackupVaultAccessPolicyError>`](crate::error::GetBackupVaultAccessPolicyError)
    pub fn get_backup_vault_access_policy(&self) -> fluent_builders::GetBackupVaultAccessPolicy {
        fluent_builders::GetBackupVaultAccessPolicy::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetBackupVaultNotifications`](crate::client::fluent_builders::GetBackupVaultNotifications) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::GetBackupVaultNotifications::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::GetBackupVaultNotifications::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    /// - On success, responds with [`GetBackupVaultNotificationsOutput`](crate::output::GetBackupVaultNotificationsOutput) with field(s):
    ///   - [`backup_vault_name(Option<String>)`](crate::output::GetBackupVaultNotificationsOutput::backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::GetBackupVaultNotificationsOutput::backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`sns_topic_arn(Option<String>)`](crate::output::GetBackupVaultNotificationsOutput::sns_topic_arn): <p>An ARN that uniquely identifies an Amazon Simple Notification Service (Amazon SNS) topic; for example, <code>arn:aws:sns:us-west-2:111122223333:MyTopic</code>.</p>
    ///   - [`backup_vault_events(Option<Vec<BackupVaultEvent>>)`](crate::output::GetBackupVaultNotificationsOutput::backup_vault_events): <p>An array of events that indicate the status of jobs to back up resources to the backup vault.</p>
    /// - On failure, responds with [`SdkError<GetBackupVaultNotificationsError>`](crate::error::GetBackupVaultNotificationsError)
    pub fn get_backup_vault_notifications(&self) -> fluent_builders::GetBackupVaultNotifications {
        fluent_builders::GetBackupVaultNotifications::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetRecoveryPointRestoreMetadata`](crate::client::fluent_builders::GetRecoveryPointRestoreMetadata) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::GetRecoveryPointRestoreMetadata::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::GetRecoveryPointRestoreMetadata::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::GetRecoveryPointRestoreMetadata::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::GetRecoveryPointRestoreMetadata::set_recovery_point_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    /// - On success, responds with [`GetRecoveryPointRestoreMetadataOutput`](crate::output::GetRecoveryPointRestoreMetadataOutput) with field(s):
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::GetRecoveryPointRestoreMetadataOutput::backup_vault_arn): <p>An ARN that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`recovery_point_arn(Option<String>)`](crate::output::GetRecoveryPointRestoreMetadataOutput::recovery_point_arn): <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`restore_metadata(Option<HashMap<String, String>>)`](crate::output::GetRecoveryPointRestoreMetadataOutput::restore_metadata): <p>The set of metadata key-value pairs that describe the original configuration of the backed-up resource. These values vary depending on the service that is being restored.</p>
    /// - On failure, responds with [`SdkError<GetRecoveryPointRestoreMetadataError>`](crate::error::GetRecoveryPointRestoreMetadataError)
    pub fn get_recovery_point_restore_metadata(
        &self,
    ) -> fluent_builders::GetRecoveryPointRestoreMetadata {
        fluent_builders::GetRecoveryPointRestoreMetadata::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`GetSupportedResourceTypes`](crate::client::fluent_builders::GetSupportedResourceTypes) operation.
    ///
    /// - The fluent builder takes no input, just [`send`](crate::client::fluent_builders::GetSupportedResourceTypes::send) it.

    /// - On success, responds with [`GetSupportedResourceTypesOutput`](crate::output::GetSupportedResourceTypesOutput) with field(s):
    ///   - [`resource_types(Option<Vec<String>>)`](crate::output::GetSupportedResourceTypesOutput::resource_types): <p>Contains a string with the supported Amazon Web Services resource types:</p>  <ul>   <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>   <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>   <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>   <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>   <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>   <li> <p> <code>FSX</code> for Amazon FSx</p> </li>   <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>   <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>   <li> <p> <code>DocDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>   <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>  </ul>
    /// - On failure, responds with [`SdkError<GetSupportedResourceTypesError>`](crate::error::GetSupportedResourceTypesError)
    pub fn get_supported_resource_types(&self) -> fluent_builders::GetSupportedResourceTypes {
        fluent_builders::GetSupportedResourceTypes::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListBackupJobs`](crate::client::fluent_builders::ListBackupJobs) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBackupJobs::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBackupJobs::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBackupJobs::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListBackupJobs::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListBackupJobs::set_max_results): <p>The maximum number of items to be returned.</p>
    ///   - [`by_resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListBackupJobs::by_resource_arn) / [`set_by_resource_arn(Option<String>)`](crate::client::fluent_builders::ListBackupJobs::set_by_resource_arn): <p>Returns only backup jobs that match the specified resource Amazon Resource Name (ARN).</p>
    ///   - [`by_state(BackupJobState)`](crate::client::fluent_builders::ListBackupJobs::by_state) / [`set_by_state(Option<BackupJobState>)`](crate::client::fluent_builders::ListBackupJobs::set_by_state): <p>Returns only backup jobs that are in the specified state.</p>
    ///   - [`by_backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::ListBackupJobs::by_backup_vault_name) / [`set_by_backup_vault_name(Option<String>)`](crate::client::fluent_builders::ListBackupJobs::set_by_backup_vault_name): <p>Returns only backup jobs that will be stored in the specified backup vault. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`by_created_before(DateTime)`](crate::client::fluent_builders::ListBackupJobs::by_created_before) / [`set_by_created_before(Option<DateTime>)`](crate::client::fluent_builders::ListBackupJobs::set_by_created_before): <p>Returns only backup jobs that were created before the specified date.</p>
    ///   - [`by_created_after(DateTime)`](crate::client::fluent_builders::ListBackupJobs::by_created_after) / [`set_by_created_after(Option<DateTime>)`](crate::client::fluent_builders::ListBackupJobs::set_by_created_after): <p>Returns only backup jobs that were created after the specified date.</p>
    ///   - [`by_resource_type(impl Into<String>)`](crate::client::fluent_builders::ListBackupJobs::by_resource_type) / [`set_by_resource_type(Option<String>)`](crate::client::fluent_builders::ListBackupJobs::set_by_resource_type): <p>Returns only backup jobs for the specified resources:</p>  <ul>   <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>   <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>   <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>   <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>   <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>   <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>   <li> <p> <code>FSx</code> for Amazon FSx</p> </li>   <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>   <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>   <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>   <li> <p> <code>S3</code> for Amazon S3</p> </li>   <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>  </ul>
    ///   - [`by_account_id(impl Into<String>)`](crate::client::fluent_builders::ListBackupJobs::by_account_id) / [`set_by_account_id(Option<String>)`](crate::client::fluent_builders::ListBackupJobs::set_by_account_id): <p>The account ID to list the jobs from. Returns only backup jobs associated with the specified account ID.</p>  <p>If used from an Organizations management account, passing <code>*</code> returns all jobs across the organization.</p>
    ///   - [`by_complete_after(DateTime)`](crate::client::fluent_builders::ListBackupJobs::by_complete_after) / [`set_by_complete_after(Option<DateTime>)`](crate::client::fluent_builders::ListBackupJobs::set_by_complete_after): <p>Returns only backup jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
    ///   - [`by_complete_before(DateTime)`](crate::client::fluent_builders::ListBackupJobs::by_complete_before) / [`set_by_complete_before(Option<DateTime>)`](crate::client::fluent_builders::ListBackupJobs::set_by_complete_before): <p>Returns only backup jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
    /// - On success, responds with [`ListBackupJobsOutput`](crate::output::ListBackupJobsOutput) with field(s):
    ///   - [`backup_jobs(Option<Vec<BackupJob>>)`](crate::output::ListBackupJobsOutput::backup_jobs): <p>An array of structures containing metadata about your backup jobs returned in JSON format.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListBackupJobsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    /// - On failure, responds with [`SdkError<ListBackupJobsError>`](crate::error::ListBackupJobsError)
    pub fn list_backup_jobs(&self) -> fluent_builders::ListBackupJobs {
        fluent_builders::ListBackupJobs::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListBackupPlans`](crate::client::fluent_builders::ListBackupPlans) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBackupPlans::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBackupPlans::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBackupPlans::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListBackupPlans::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListBackupPlans::set_max_results): <p>The maximum number of items to be returned.</p>
    ///   - [`include_deleted(bool)`](crate::client::fluent_builders::ListBackupPlans::include_deleted) / [`set_include_deleted(Option<bool>)`](crate::client::fluent_builders::ListBackupPlans::set_include_deleted): <p>A Boolean value with a default value of <code>FALSE</code> that returns deleted backup plans when set to <code>TRUE</code>.</p>
    /// - On success, responds with [`ListBackupPlansOutput`](crate::output::ListBackupPlansOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListBackupPlansOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`backup_plans_list(Option<Vec<BackupPlansListMember>>)`](crate::output::ListBackupPlansOutput::backup_plans_list): <p>An array of backup plan list items containing metadata about your saved backup plans.</p>
    /// - On failure, responds with [`SdkError<ListBackupPlansError>`](crate::error::ListBackupPlansError)
    pub fn list_backup_plans(&self) -> fluent_builders::ListBackupPlans {
        fluent_builders::ListBackupPlans::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListBackupPlanTemplates`](crate::client::fluent_builders::ListBackupPlanTemplates) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBackupPlanTemplates::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBackupPlanTemplates::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBackupPlanTemplates::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListBackupPlanTemplates::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListBackupPlanTemplates::set_max_results): <p>The maximum number of items to be returned.</p>
    /// - On success, responds with [`ListBackupPlanTemplatesOutput`](crate::output::ListBackupPlanTemplatesOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListBackupPlanTemplatesOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`backup_plan_templates_list(Option<Vec<BackupPlanTemplatesListMember>>)`](crate::output::ListBackupPlanTemplatesOutput::backup_plan_templates_list): <p>An array of template list items containing metadata about your saved templates.</p>
    /// - On failure, responds with [`SdkError<ListBackupPlanTemplatesError>`](crate::error::ListBackupPlanTemplatesError)
    pub fn list_backup_plan_templates(&self) -> fluent_builders::ListBackupPlanTemplates {
        fluent_builders::ListBackupPlanTemplates::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListBackupPlanVersions`](crate::client::fluent_builders::ListBackupPlanVersions) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBackupPlanVersions::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::ListBackupPlanVersions::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::ListBackupPlanVersions::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBackupPlanVersions::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBackupPlanVersions::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListBackupPlanVersions::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListBackupPlanVersions::set_max_results): <p>The maximum number of items to be returned.</p>
    /// - On success, responds with [`ListBackupPlanVersionsOutput`](crate::output::ListBackupPlanVersionsOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListBackupPlanVersionsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`backup_plan_versions_list(Option<Vec<BackupPlansListMember>>)`](crate::output::ListBackupPlanVersionsOutput::backup_plan_versions_list): <p>An array of version list items containing metadata about your backup plans.</p>
    /// - On failure, responds with [`SdkError<ListBackupPlanVersionsError>`](crate::error::ListBackupPlanVersionsError)
    pub fn list_backup_plan_versions(&self) -> fluent_builders::ListBackupPlanVersions {
        fluent_builders::ListBackupPlanVersions::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListBackupSelections`](crate::client::fluent_builders::ListBackupSelections) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBackupSelections::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::ListBackupSelections::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::ListBackupSelections::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBackupSelections::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBackupSelections::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListBackupSelections::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListBackupSelections::set_max_results): <p>The maximum number of items to be returned.</p>
    /// - On success, responds with [`ListBackupSelectionsOutput`](crate::output::ListBackupSelectionsOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListBackupSelectionsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`backup_selections_list(Option<Vec<BackupSelectionsListMember>>)`](crate::output::ListBackupSelectionsOutput::backup_selections_list): <p>An array of backup selection list items containing metadata about each resource in the list.</p>
    /// - On failure, responds with [`SdkError<ListBackupSelectionsError>`](crate::error::ListBackupSelectionsError)
    pub fn list_backup_selections(&self) -> fluent_builders::ListBackupSelections {
        fluent_builders::ListBackupSelections::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListBackupVaults`](crate::client::fluent_builders::ListBackupVaults) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListBackupVaults::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListBackupVaults::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListBackupVaults::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListBackupVaults::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListBackupVaults::set_max_results): <p>The maximum number of items to be returned.</p>
    /// - On success, responds with [`ListBackupVaultsOutput`](crate::output::ListBackupVaultsOutput) with field(s):
    ///   - [`backup_vault_list(Option<Vec<BackupVaultListMember>>)`](crate::output::ListBackupVaultsOutput::backup_vault_list): <p>An array of backup vault list members containing vault metadata, including Amazon Resource Name (ARN), display name, creation date, number of saved recovery points, and encryption information if the resources saved in the backup vault are encrypted.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListBackupVaultsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    /// - On failure, responds with [`SdkError<ListBackupVaultsError>`](crate::error::ListBackupVaultsError)
    pub fn list_backup_vaults(&self) -> fluent_builders::ListBackupVaults {
        fluent_builders::ListBackupVaults::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListCopyJobs`](crate::client::fluent_builders::ListCopyJobs) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListCopyJobs::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListCopyJobs::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListCopyJobs::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token. </p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListCopyJobs::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListCopyJobs::set_max_results): <p>The maximum number of items to be returned.</p>
    ///   - [`by_resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListCopyJobs::by_resource_arn) / [`set_by_resource_arn(Option<String>)`](crate::client::fluent_builders::ListCopyJobs::set_by_resource_arn): <p>Returns only copy jobs that match the specified resource Amazon Resource Name (ARN). </p>
    ///   - [`by_state(CopyJobState)`](crate::client::fluent_builders::ListCopyJobs::by_state) / [`set_by_state(Option<CopyJobState>)`](crate::client::fluent_builders::ListCopyJobs::set_by_state): <p>Returns only copy jobs that are in the specified state.</p>
    ///   - [`by_created_before(DateTime)`](crate::client::fluent_builders::ListCopyJobs::by_created_before) / [`set_by_created_before(Option<DateTime>)`](crate::client::fluent_builders::ListCopyJobs::set_by_created_before): <p>Returns only copy jobs that were created before the specified date.</p>
    ///   - [`by_created_after(DateTime)`](crate::client::fluent_builders::ListCopyJobs::by_created_after) / [`set_by_created_after(Option<DateTime>)`](crate::client::fluent_builders::ListCopyJobs::set_by_created_after): <p>Returns only copy jobs that were created after the specified date.</p>
    ///   - [`by_resource_type(impl Into<String>)`](crate::client::fluent_builders::ListCopyJobs::by_resource_type) / [`set_by_resource_type(Option<String>)`](crate::client::fluent_builders::ListCopyJobs::set_by_resource_type): <p>Returns only backup jobs for the specified resources:</p>  <ul>   <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>   <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>   <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>   <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>   <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>   <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>   <li> <p> <code>FSx</code> for Amazon FSx</p> </li>   <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>   <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>   <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>   <li> <p> <code>S3</code> for Amazon S3</p> </li>   <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>  </ul>
    ///   - [`by_destination_vault_arn(impl Into<String>)`](crate::client::fluent_builders::ListCopyJobs::by_destination_vault_arn) / [`set_by_destination_vault_arn(Option<String>)`](crate::client::fluent_builders::ListCopyJobs::set_by_destination_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a source backup vault to copy from; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>. </p>
    ///   - [`by_account_id(impl Into<String>)`](crate::client::fluent_builders::ListCopyJobs::by_account_id) / [`set_by_account_id(Option<String>)`](crate::client::fluent_builders::ListCopyJobs::set_by_account_id): <p>The account ID to list the jobs from. Returns only copy jobs associated with the specified account ID.</p>
    ///   - [`by_complete_before(DateTime)`](crate::client::fluent_builders::ListCopyJobs::by_complete_before) / [`set_by_complete_before(Option<DateTime>)`](crate::client::fluent_builders::ListCopyJobs::set_by_complete_before): <p>Returns only copy jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
    ///   - [`by_complete_after(DateTime)`](crate::client::fluent_builders::ListCopyJobs::by_complete_after) / [`set_by_complete_after(Option<DateTime>)`](crate::client::fluent_builders::ListCopyJobs::set_by_complete_after): <p>Returns only copy jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
    /// - On success, responds with [`ListCopyJobsOutput`](crate::output::ListCopyJobsOutput) with field(s):
    ///   - [`copy_jobs(Option<Vec<CopyJob>>)`](crate::output::ListCopyJobsOutput::copy_jobs): <p>An array of structures containing metadata about your copy jobs returned in JSON format. </p>
    ///   - [`next_token(Option<String>)`](crate::output::ListCopyJobsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token. </p>
    /// - On failure, responds with [`SdkError<ListCopyJobsError>`](crate::error::ListCopyJobsError)
    pub fn list_copy_jobs(&self) -> fluent_builders::ListCopyJobs {
        fluent_builders::ListCopyJobs::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListFrameworks`](crate::client::fluent_builders::ListFrameworks) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListFrameworks::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListFrameworks::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListFrameworks::set_max_results): <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListFrameworks::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListFrameworks::set_next_token): <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
    /// - On success, responds with [`ListFrameworksOutput`](crate::output::ListFrameworksOutput) with field(s):
    ///   - [`frameworks(Option<Vec<Framework>>)`](crate::output::ListFrameworksOutput::frameworks): <p>A list of frameworks with details for each framework, including the framework name, Amazon Resource Name (ARN), description, number of controls, creation time, and deployment status.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListFrameworksOutput::next_token): <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
    /// - On failure, responds with [`SdkError<ListFrameworksError>`](crate::error::ListFrameworksError)
    pub fn list_frameworks(&self) -> fluent_builders::ListFrameworks {
        fluent_builders::ListFrameworks::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListProtectedResources`](crate::client::fluent_builders::ListProtectedResources) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListProtectedResources::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListProtectedResources::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListProtectedResources::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListProtectedResources::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListProtectedResources::set_max_results): <p>The maximum number of items to be returned.</p>
    /// - On success, responds with [`ListProtectedResourcesOutput`](crate::output::ListProtectedResourcesOutput) with field(s):
    ///   - [`results(Option<Vec<ProtectedResource>>)`](crate::output::ListProtectedResourcesOutput::results): <p>An array of resources successfully backed up by Backup including the time the resource was saved, an Amazon Resource Name (ARN) of the resource, and a resource type.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListProtectedResourcesOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    /// - On failure, responds with [`SdkError<ListProtectedResourcesError>`](crate::error::ListProtectedResourcesError)
    pub fn list_protected_resources(&self) -> fluent_builders::ListProtectedResources {
        fluent_builders::ListProtectedResources::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListRecoveryPointsByBackupVault`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p> <note>   <p>Backup vault name might not be available when a supported service creates the backup.</p>  </note>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_max_results): <p>The maximum number of items to be returned.</p>
    ///   - [`by_resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::by_resource_arn) / [`set_by_resource_arn(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_by_resource_arn): <p>Returns only recovery points that match the specified resource Amazon Resource Name (ARN).</p>
    ///   - [`by_resource_type(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::by_resource_type) / [`set_by_resource_type(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_by_resource_type): <p>Returns only recovery points that match the specified resource type.</p>
    ///   - [`by_backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::by_backup_plan_id) / [`set_by_backup_plan_id(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_by_backup_plan_id): <p>Returns only recovery points that match the specified backup plan ID.</p>
    ///   - [`by_created_before(DateTime)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::by_created_before) / [`set_by_created_before(Option<DateTime>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_by_created_before): <p>Returns only recovery points that were created before the specified timestamp.</p>
    ///   - [`by_created_after(DateTime)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::by_created_after) / [`set_by_created_after(Option<DateTime>)`](crate::client::fluent_builders::ListRecoveryPointsByBackupVault::set_by_created_after): <p>Returns only recovery points that were created after the specified timestamp.</p>
    /// - On success, responds with [`ListRecoveryPointsByBackupVaultOutput`](crate::output::ListRecoveryPointsByBackupVaultOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListRecoveryPointsByBackupVaultOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`recovery_points(Option<Vec<RecoveryPointByBackupVault>>)`](crate::output::ListRecoveryPointsByBackupVaultOutput::recovery_points): <p>An array of objects that contain detailed information about recovery points saved in a backup vault.</p>
    /// - On failure, responds with [`SdkError<ListRecoveryPointsByBackupVaultError>`](crate::error::ListRecoveryPointsByBackupVaultError)
    pub fn list_recovery_points_by_backup_vault(
        &self,
    ) -> fluent_builders::ListRecoveryPointsByBackupVault {
        fluent_builders::ListRecoveryPointsByBackupVault::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListRecoveryPointsByResource`](crate::client::fluent_builders::ListRecoveryPointsByResource) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListRecoveryPointsByResource::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByResource::set_resource_arn): <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListRecoveryPointsByResource::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListRecoveryPointsByResource::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListRecoveryPointsByResource::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListRecoveryPointsByResource::set_max_results): <p>The maximum number of items to be returned.</p> <note>   <p>Amazon RDS requires a value of at least 20.</p>  </note>
    /// - On success, responds with [`ListRecoveryPointsByResourceOutput`](crate::output::ListRecoveryPointsByResourceOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListRecoveryPointsByResourceOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`recovery_points(Option<Vec<RecoveryPointByResource>>)`](crate::output::ListRecoveryPointsByResourceOutput::recovery_points): <p>An array of objects that contain detailed information about recovery points of the specified resource type.</p> <note>   <p>Only Amazon EFS and Amazon EC2 recovery points return BackupVaultName.</p>  </note>
    /// - On failure, responds with [`SdkError<ListRecoveryPointsByResourceError>`](crate::error::ListRecoveryPointsByResourceError)
    pub fn list_recovery_points_by_resource(
        &self,
    ) -> fluent_builders::ListRecoveryPointsByResource {
        fluent_builders::ListRecoveryPointsByResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListReportJobs`](crate::client::fluent_builders::ListReportJobs) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListReportJobs::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`by_report_plan_name(impl Into<String>)`](crate::client::fluent_builders::ListReportJobs::by_report_plan_name) / [`set_by_report_plan_name(Option<String>)`](crate::client::fluent_builders::ListReportJobs::set_by_report_plan_name): <p>Returns only report jobs with the specified report plan name.</p>
    ///   - [`by_creation_before(DateTime)`](crate::client::fluent_builders::ListReportJobs::by_creation_before) / [`set_by_creation_before(Option<DateTime>)`](crate::client::fluent_builders::ListReportJobs::set_by_creation_before): <p>Returns only report jobs that were created before the date and time specified in Unix format and Coordinated Universal Time (UTC). For example, the value 1516925490 represents Friday, January 26, 2018 12:11:30 AM.</p>
    ///   - [`by_creation_after(DateTime)`](crate::client::fluent_builders::ListReportJobs::by_creation_after) / [`set_by_creation_after(Option<DateTime>)`](crate::client::fluent_builders::ListReportJobs::set_by_creation_after): <p>Returns only report jobs that were created after the date and time specified in Unix format and Coordinated Universal Time (UTC). For example, the value 1516925490 represents Friday, January 26, 2018 12:11:30 AM.</p>
    ///   - [`by_status(impl Into<String>)`](crate::client::fluent_builders::ListReportJobs::by_status) / [`set_by_status(Option<String>)`](crate::client::fluent_builders::ListReportJobs::set_by_status): <p>Returns only report jobs that are in the specified status. The statuses are:</p>  <p> <code>CREATED | RUNNING | COMPLETED | FAILED</code> </p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListReportJobs::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListReportJobs::set_max_results): <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListReportJobs::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListReportJobs::set_next_token): <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
    /// - On success, responds with [`ListReportJobsOutput`](crate::output::ListReportJobsOutput) with field(s):
    ///   - [`report_jobs(Option<Vec<ReportJob>>)`](crate::output::ListReportJobsOutput::report_jobs): <p>Details about your report jobs in JSON format.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListReportJobsOutput::next_token): <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
    /// - On failure, responds with [`SdkError<ListReportJobsError>`](crate::error::ListReportJobsError)
    pub fn list_report_jobs(&self) -> fluent_builders::ListReportJobs {
        fluent_builders::ListReportJobs::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListReportPlans`](crate::client::fluent_builders::ListReportPlans) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListReportPlans::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListReportPlans::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListReportPlans::set_max_results): <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListReportPlans::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListReportPlans::set_next_token): <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
    /// - On success, responds with [`ListReportPlansOutput`](crate::output::ListReportPlansOutput) with field(s):
    ///   - [`report_plans(Option<Vec<ReportPlan>>)`](crate::output::ListReportPlansOutput::report_plans): <p>A list of your report plans with detailed information for each plan. This information includes the Amazon Resource Name (ARN), report plan name, description, settings, delivery channel, deployment status, creation time, and last times the report plan attempted to and successfully ran.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListReportPlansOutput::next_token): <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
    /// - On failure, responds with [`SdkError<ListReportPlansError>`](crate::error::ListReportPlansError)
    pub fn list_report_plans(&self) -> fluent_builders::ListReportPlans {
        fluent_builders::ListReportPlans::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListRestoreJobs`](crate::client::fluent_builders::ListRestoreJobs) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListRestoreJobs::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListRestoreJobs::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListRestoreJobs::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListRestoreJobs::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListRestoreJobs::set_max_results): <p>The maximum number of items to be returned.</p>
    ///   - [`by_account_id(impl Into<String>)`](crate::client::fluent_builders::ListRestoreJobs::by_account_id) / [`set_by_account_id(Option<String>)`](crate::client::fluent_builders::ListRestoreJobs::set_by_account_id): <p>The account ID to list the jobs from. Returns only restore jobs associated with the specified account ID.</p>
    ///   - [`by_created_before(DateTime)`](crate::client::fluent_builders::ListRestoreJobs::by_created_before) / [`set_by_created_before(Option<DateTime>)`](crate::client::fluent_builders::ListRestoreJobs::set_by_created_before): <p>Returns only restore jobs that were created before the specified date.</p>
    ///   - [`by_created_after(DateTime)`](crate::client::fluent_builders::ListRestoreJobs::by_created_after) / [`set_by_created_after(Option<DateTime>)`](crate::client::fluent_builders::ListRestoreJobs::set_by_created_after): <p>Returns only restore jobs that were created after the specified date.</p>
    ///   - [`by_status(RestoreJobStatus)`](crate::client::fluent_builders::ListRestoreJobs::by_status) / [`set_by_status(Option<RestoreJobStatus>)`](crate::client::fluent_builders::ListRestoreJobs::set_by_status): <p>Returns only restore jobs associated with the specified job status.</p>
    ///   - [`by_complete_before(DateTime)`](crate::client::fluent_builders::ListRestoreJobs::by_complete_before) / [`set_by_complete_before(Option<DateTime>)`](crate::client::fluent_builders::ListRestoreJobs::set_by_complete_before): <p>Returns only copy jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
    ///   - [`by_complete_after(DateTime)`](crate::client::fluent_builders::ListRestoreJobs::by_complete_after) / [`set_by_complete_after(Option<DateTime>)`](crate::client::fluent_builders::ListRestoreJobs::set_by_complete_after): <p>Returns only copy jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
    /// - On success, responds with [`ListRestoreJobsOutput`](crate::output::ListRestoreJobsOutput) with field(s):
    ///   - [`restore_jobs(Option<Vec<RestoreJobsListMember>>)`](crate::output::ListRestoreJobsOutput::restore_jobs): <p>An array of objects that contain detailed information about jobs to restore saved resources.</p>
    ///   - [`next_token(Option<String>)`](crate::output::ListRestoreJobsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    /// - On failure, responds with [`SdkError<ListRestoreJobsError>`](crate::error::ListRestoreJobsError)
    pub fn list_restore_jobs(&self) -> fluent_builders::ListRestoreJobs {
        fluent_builders::ListRestoreJobs::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`ListTags`](crate::client::fluent_builders::ListTags) operation.
    /// This operation supports pagination; See [`into_paginator()`](crate::client::fluent_builders::ListTags::into_paginator).
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::ListTags::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::ListTags::set_resource_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the type of resource. Valid targets for <code>ListTags</code> are recovery points, backup plans, and backup vaults.</p>
    ///   - [`next_token(impl Into<String>)`](crate::client::fluent_builders::ListTags::next_token) / [`set_next_token(Option<String>)`](crate::client::fluent_builders::ListTags::set_next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`max_results(i32)`](crate::client::fluent_builders::ListTags::max_results) / [`set_max_results(Option<i32>)`](crate::client::fluent_builders::ListTags::set_max_results): <p>The maximum number of items to be returned.</p>
    /// - On success, responds with [`ListTagsOutput`](crate::output::ListTagsOutput) with field(s):
    ///   - [`next_token(Option<String>)`](crate::output::ListTagsOutput::next_token): <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
    ///   - [`tags(Option<HashMap<String, String>>)`](crate::output::ListTagsOutput::tags): <p>To help organize your resources, you can assign your own metadata to the resources you create. Each tag is a key-value pair.</p>
    /// - On failure, responds with [`SdkError<ListTagsError>`](crate::error::ListTagsError)
    pub fn list_tags(&self) -> fluent_builders::ListTags {
        fluent_builders::ListTags::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`PutBackupVaultAccessPolicy`](crate::client::fluent_builders::PutBackupVaultAccessPolicy) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::PutBackupVaultAccessPolicy::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::PutBackupVaultAccessPolicy::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`policy(impl Into<String>)`](crate::client::fluent_builders::PutBackupVaultAccessPolicy::policy) / [`set_policy(Option<String>)`](crate::client::fluent_builders::PutBackupVaultAccessPolicy::set_policy): <p>The backup vault access policy document in JSON format.</p>
    /// - On success, responds with [`PutBackupVaultAccessPolicyOutput`](crate::output::PutBackupVaultAccessPolicyOutput)

    /// - On failure, responds with [`SdkError<PutBackupVaultAccessPolicyError>`](crate::error::PutBackupVaultAccessPolicyError)
    pub fn put_backup_vault_access_policy(&self) -> fluent_builders::PutBackupVaultAccessPolicy {
        fluent_builders::PutBackupVaultAccessPolicy::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`PutBackupVaultLockConfiguration`](crate::client::fluent_builders::PutBackupVaultLockConfiguration) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::set_backup_vault_name): <p>The Backup Vault Lock configuration that specifies the name of the backup vault it protects.</p>
    ///   - [`min_retention_days(i64)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::min_retention_days) / [`set_min_retention_days(Option<i64>)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::set_min_retention_days): <p>The Backup Vault Lock configuration that specifies the minimum retention period that the vault retains its recovery points. This setting can be useful if, for example, your organization's policies require you to retain certain data for at least seven years (2555 days).</p>  <p>If this parameter is not specified, Vault Lock will not enforce a minimum retention period.</p>  <p>If this parameter is specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or longer than the minimum retention period. If the job's retention period is shorter than that minimum retention period, then the vault fails that backup or copy job, and you should either modify your lifecycle settings or use a different vault. The shortest minimum retention period you can specify is 1 day. Recovery points already saved in the vault prior to Vault Lock are not affected.</p>
    ///   - [`max_retention_days(i64)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::max_retention_days) / [`set_max_retention_days(Option<i64>)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::set_max_retention_days): <p>The Backup Vault Lock configuration that specifies the maximum retention period that the vault retains its recovery points. This setting can be useful if, for example, your organization's policies require you to destroy certain data after retaining it for four years (1460 days).</p>  <p>If this parameter is not included, Vault Lock does not enforce a maximum retention period on the recovery points in the vault. If this parameter is included without a value, Vault Lock will not enforce a maximum retention period.</p>  <p>If this parameter is specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or shorter than the maximum retention period. If the job's retention period is longer than that maximum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault. The longest maximum retention period you can specify is 36500 days (approximately 100 years). Recovery points already saved in the vault prior to Vault Lock are not affected.</p>
    ///   - [`changeable_for_days(i64)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::changeable_for_days) / [`set_changeable_for_days(Option<i64>)`](crate::client::fluent_builders::PutBackupVaultLockConfiguration::set_changeable_for_days): <p>The Backup Vault Lock configuration that specifies the number of days before the lock date. For example, setting <code>ChangeableForDays</code> to 30 on Jan. 1, 2022 at 8pm UTC will set the lock date to Jan. 31, 2022 at 8pm UTC.</p>  <p>Backup enforces a 72-hour cooling-off period before Vault Lock takes effect and becomes immutable. Therefore, you must set <code>ChangeableForDays</code> to 3 or greater.</p>  <p>Before the lock date, you can delete Vault Lock from the vault using <code>DeleteBackupVaultLockConfiguration</code> or change the Vault Lock configuration using <code>PutBackupVaultLockConfiguration</code>. On and after the lock date, the Vault Lock becomes immutable and cannot be changed or deleted.</p>  <p>If this parameter is not specified, you can delete Vault Lock from the vault using <code>DeleteBackupVaultLockConfiguration</code> or change the Vault Lock configuration using <code>PutBackupVaultLockConfiguration</code> at any time.</p>
    /// - On success, responds with [`PutBackupVaultLockConfigurationOutput`](crate::output::PutBackupVaultLockConfigurationOutput)

    /// - On failure, responds with [`SdkError<PutBackupVaultLockConfigurationError>`](crate::error::PutBackupVaultLockConfigurationError)
    pub fn put_backup_vault_lock_configuration(
        &self,
    ) -> fluent_builders::PutBackupVaultLockConfiguration {
        fluent_builders::PutBackupVaultLockConfiguration::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`PutBackupVaultNotifications`](crate::client::fluent_builders::PutBackupVaultNotifications) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::PutBackupVaultNotifications::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::PutBackupVaultNotifications::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`sns_topic_arn(impl Into<String>)`](crate::client::fluent_builders::PutBackupVaultNotifications::sns_topic_arn) / [`set_sns_topic_arn(Option<String>)`](crate::client::fluent_builders::PutBackupVaultNotifications::set_sns_topic_arn): <p>The Amazon Resource Name (ARN) that specifies the topic for a backup vault’s events; for example, <code>arn:aws:sns:us-west-2:111122223333:MyVaultTopic</code>.</p>
    ///   - [`backup_vault_events(Vec<BackupVaultEvent>)`](crate::client::fluent_builders::PutBackupVaultNotifications::backup_vault_events) / [`set_backup_vault_events(Option<Vec<BackupVaultEvent>>)`](crate::client::fluent_builders::PutBackupVaultNotifications::set_backup_vault_events): <p>An array of events that indicate the status of jobs to back up resources to the backup vault.</p>  <p>For common use cases and code samples, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/sns-notifications.html">Using Amazon SNS to track Backup events</a>.</p>  <p>The following events are supported:</p>  <ul>   <li> <p> <code>BACKUP_JOB_STARTED</code> | <code>BACKUP_JOB_COMPLETED</code> </p> </li>   <li> <p> <code>COPY_JOB_STARTED</code> | <code>COPY_JOB_SUCCESSFUL</code> | <code>COPY_JOB_FAILED</code> </p> </li>   <li> <p> <code>RESTORE_JOB_STARTED</code> | <code>RESTORE_JOB_COMPLETED</code> | <code>RECOVERY_POINT_MODIFIED</code> </p> </li>   <li> <p> <code>S3_BACKUP_OBJECT_FAILED</code> | <code>S3_RESTORE_OBJECT_FAILED</code> </p> </li>  </ul> <note>   <p>Ignore the list below because it includes deprecated events. Refer to the list above.</p>  </note>
    /// - On success, responds with [`PutBackupVaultNotificationsOutput`](crate::output::PutBackupVaultNotificationsOutput)

    /// - On failure, responds with [`SdkError<PutBackupVaultNotificationsError>`](crate::error::PutBackupVaultNotificationsError)
    pub fn put_backup_vault_notifications(&self) -> fluent_builders::PutBackupVaultNotifications {
        fluent_builders::PutBackupVaultNotifications::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`StartBackupJob`](crate::client::fluent_builders::StartBackupJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::StartBackupJob::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::StartBackupJob::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::StartBackupJob::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::StartBackupJob::set_resource_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`iam_role_arn(impl Into<String>)`](crate::client::fluent_builders::StartBackupJob::iam_role_arn) / [`set_iam_role_arn(Option<String>)`](crate::client::fluent_builders::StartBackupJob::set_iam_role_arn): <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::StartBackupJob::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::StartBackupJob::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartBackupJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    ///   - [`start_window_minutes(i64)`](crate::client::fluent_builders::StartBackupJob::start_window_minutes) / [`set_start_window_minutes(Option<i64>)`](crate::client::fluent_builders::StartBackupJob::set_start_window_minutes): <p>A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours.</p>
    ///   - [`complete_window_minutes(i64)`](crate::client::fluent_builders::StartBackupJob::complete_window_minutes) / [`set_complete_window_minutes(Option<i64>)`](crate::client::fluent_builders::StartBackupJob::set_complete_window_minutes): <p>A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for <code>StartWindowMinutes</code>, or if the backup started later than scheduled.</p>
    ///   - [`lifecycle(Lifecycle)`](crate::client::fluent_builders::StartBackupJob::lifecycle) / [`set_lifecycle(Option<Lifecycle>)`](crate::client::fluent_builders::StartBackupJob::set_lifecycle): <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define. </p>  <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>  <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    ///   - [`recovery_point_tags(HashMap<String, String>)`](crate::client::fluent_builders::StartBackupJob::recovery_point_tags) / [`set_recovery_point_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::StartBackupJob::set_recovery_point_tags): <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair.</p>
    ///   - [`backup_options(HashMap<String, String>)`](crate::client::fluent_builders::StartBackupJob::backup_options) / [`set_backup_options(Option<HashMap<String, String>>)`](crate::client::fluent_builders::StartBackupJob::set_backup_options): <p>Specifies the backup option for a selected resource. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>  <p>Valid values: Set to <code>"WindowsVSS":"enabled"</code> to enable the <code>WindowsVSS</code> backup option and create a Windows VSS backup. Set to <code>"WindowsVSS""disabled"</code> to create a regular backup. The <code>WindowsVSS</code> option is not enabled by default.</p>
    /// - On success, responds with [`StartBackupJobOutput`](crate::output::StartBackupJobOutput) with field(s):
    ///   - [`backup_job_id(Option<String>)`](crate::output::StartBackupJobOutput::backup_job_id): <p>Uniquely identifies a request to Backup to back up a resource.</p>
    ///   - [`recovery_point_arn(Option<String>)`](crate::output::StartBackupJobOutput::recovery_point_arn): <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::StartBackupJobOutput::creation_date): <p>The date and time that a backup job is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<StartBackupJobError>`](crate::error::StartBackupJobError)
    pub fn start_backup_job(&self) -> fluent_builders::StartBackupJob {
        fluent_builders::StartBackupJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`StartCopyJob`](crate::client::fluent_builders::StartCopyJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::StartCopyJob::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::StartCopyJob::set_recovery_point_arn): <p>An ARN that uniquely identifies a recovery point to use for the copy job; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45. </p>
    ///   - [`source_backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::StartCopyJob::source_backup_vault_name) / [`set_source_backup_vault_name(Option<String>)`](crate::client::fluent_builders::StartCopyJob::set_source_backup_vault_name): <p>The name of a logical source container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`destination_backup_vault_arn(impl Into<String>)`](crate::client::fluent_builders::StartCopyJob::destination_backup_vault_arn) / [`set_destination_backup_vault_arn(Option<String>)`](crate::client::fluent_builders::StartCopyJob::set_destination_backup_vault_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a destination backup vault to copy to; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`iam_role_arn(impl Into<String>)`](crate::client::fluent_builders::StartCopyJob::iam_role_arn) / [`set_iam_role_arn(Option<String>)`](crate::client::fluent_builders::StartCopyJob::set_iam_role_arn): <p>Specifies the IAM role ARN used to copy the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::StartCopyJob::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::StartCopyJob::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartCopyJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    ///   - [`lifecycle(Lifecycle)`](crate::client::fluent_builders::StartCopyJob::lifecycle) / [`set_lifecycle(Option<Lifecycle>)`](crate::client::fluent_builders::StartCopyJob::set_lifecycle): <p>Contains an array of <code>Transition</code> objects specifying how long in days before a recovery point transitions to cold storage or is deleted.</p>  <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, on the console, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>  <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    /// - On success, responds with [`StartCopyJobOutput`](crate::output::StartCopyJobOutput) with field(s):
    ///   - [`copy_job_id(Option<String>)`](crate::output::StartCopyJobOutput::copy_job_id): <p>Uniquely identifies a copy job.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::StartCopyJobOutput::creation_date): <p>The date and time that a copy job is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<StartCopyJobError>`](crate::error::StartCopyJobError)
    pub fn start_copy_job(&self) -> fluent_builders::StartCopyJob {
        fluent_builders::StartCopyJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`StartReportJob`](crate::client::fluent_builders::StartReportJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`report_plan_name(impl Into<String>)`](crate::client::fluent_builders::StartReportJob::report_plan_name) / [`set_report_plan_name(Option<String>)`](crate::client::fluent_builders::StartReportJob::set_report_plan_name): <p>The unique name of a report plan.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::StartReportJob::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::StartReportJob::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartReportJobInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    /// - On success, responds with [`StartReportJobOutput`](crate::output::StartReportJobOutput) with field(s):
    ///   - [`report_job_id(Option<String>)`](crate::output::StartReportJobOutput::report_job_id): <p>The identifier of the report job. A unique, randomly generated, Unicode, UTF-8 encoded string that is at most 1,024 bytes long. The report job ID cannot be edited.</p>
    /// - On failure, responds with [`SdkError<StartReportJobError>`](crate::error::StartReportJobError)
    pub fn start_report_job(&self) -> fluent_builders::StartReportJob {
        fluent_builders::StartReportJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`StartRestoreJob`](crate::client::fluent_builders::StartRestoreJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::StartRestoreJob::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::StartRestoreJob::set_recovery_point_arn): <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`metadata(HashMap<String, String>)`](crate::client::fluent_builders::StartRestoreJob::metadata) / [`set_metadata(Option<HashMap<String, String>>)`](crate::client::fluent_builders::StartRestoreJob::set_metadata): <p>A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.</p>  <p> You can get configuration metadata about a resource at the time it was backed up by calling <code>GetRecoveryPointRestoreMetadata</code>. However, values in addition to those provided by <code>GetRecoveryPointRestoreMetadata</code> might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.</p>  <p>You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:</p>  <ul>   <li> <p> <code>file-system-id</code>: The ID of the Amazon EFS file system that is backed up by Backup. Returned in <code>GetRecoveryPointRestoreMetadata</code>.</p> </li>   <li> <p> <code>Encrypted</code>: A Boolean value that, if true, specifies that the file system is encrypted. If <code>KmsKeyId</code> is specified, <code>Encrypted</code> must be set to <code>true</code>.</p> </li>   <li> <p> <code>KmsKeyId</code>: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.</p> </li>   <li> <p> <code>PerformanceMode</code>: Specifies the throughput mode of the file system.</p> </li>   <li> <p> <code>CreationToken</code>: A user-supplied value that ensures the uniqueness (idempotency) of the request.</p> </li>   <li> <p> <code>newFileSystem</code>: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.</p> </li>   <li> <p> <code>ItemsToRestore</code>: An array of one to five strings where each string is a file path. Use <code>ItemsToRestore</code> to restore specific files or directories rather than the entire file system. This parameter is optional. For example, <code>"itemsToRestore":"[\"/my.test\"]"</code>.</p> </li>  </ul>
    ///   - [`iam_role_arn(impl Into<String>)`](crate::client::fluent_builders::StartRestoreJob::iam_role_arn) / [`set_iam_role_arn(Option<String>)`](crate::client::fluent_builders::StartRestoreJob::set_iam_role_arn): <p>The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::StartRestoreJob::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::StartRestoreJob::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartRestoreJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    ///   - [`resource_type(impl Into<String>)`](crate::client::fluent_builders::StartRestoreJob::resource_type) / [`set_resource_type(Option<String>)`](crate::client::fluent_builders::StartRestoreJob::set_resource_type): <p>Starts a job to restore a recovery point for one of the following resources:</p>  <ul>   <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>   <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>   <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>   <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>   <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>   <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>   <li> <p> <code>FSx</code> for Amazon FSx</p> </li>   <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>   <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>   <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>   <li> <p> <code>S3</code> for Amazon S3</p> </li>   <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>  </ul>
    /// - On success, responds with [`StartRestoreJobOutput`](crate::output::StartRestoreJobOutput) with field(s):
    ///   - [`restore_job_id(Option<String>)`](crate::output::StartRestoreJobOutput::restore_job_id): <p>Uniquely identifies the job that restores a recovery point.</p>
    /// - On failure, responds with [`SdkError<StartRestoreJobError>`](crate::error::StartRestoreJobError)
    pub fn start_restore_job(&self) -> fluent_builders::StartRestoreJob {
        fluent_builders::StartRestoreJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`StopBackupJob`](crate::client::fluent_builders::StopBackupJob) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_job_id(impl Into<String>)`](crate::client::fluent_builders::StopBackupJob::backup_job_id) / [`set_backup_job_id(Option<String>)`](crate::client::fluent_builders::StopBackupJob::set_backup_job_id): <p>Uniquely identifies a request to Backup to back up a resource.</p>
    /// - On success, responds with [`StopBackupJobOutput`](crate::output::StopBackupJobOutput)

    /// - On failure, responds with [`SdkError<StopBackupJobError>`](crate::error::StopBackupJobError)
    pub fn stop_backup_job(&self) -> fluent_builders::StopBackupJob {
        fluent_builders::StopBackupJob::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`TagResource`](crate::client::fluent_builders::TagResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::TagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::TagResource::set_resource_arn): <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the type of the tagged resource.</p>
    ///   - [`tags(HashMap<String, String>)`](crate::client::fluent_builders::TagResource::tags) / [`set_tags(Option<HashMap<String, String>>)`](crate::client::fluent_builders::TagResource::set_tags): <p>Key-value pairs that are used to help organize your resources. You can assign your own metadata to the resources you create. For clarity, this is the structure to assign tags: <code>[{"Key":"string","Value":"string"}]</code>.</p>
    /// - On success, responds with [`TagResourceOutput`](crate::output::TagResourceOutput)

    /// - On failure, responds with [`SdkError<TagResourceError>`](crate::error::TagResourceError)
    pub fn tag_resource(&self) -> fluent_builders::TagResource {
        fluent_builders::TagResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UntagResource`](crate::client::fluent_builders::UntagResource) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_arn(impl Into<String>)`](crate::client::fluent_builders::UntagResource::resource_arn) / [`set_resource_arn(Option<String>)`](crate::client::fluent_builders::UntagResource::set_resource_arn): <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the type of the tagged resource.</p>
    ///   - [`tag_key_list(Vec<String>)`](crate::client::fluent_builders::UntagResource::tag_key_list) / [`set_tag_key_list(Option<Vec<String>>)`](crate::client::fluent_builders::UntagResource::set_tag_key_list): <p>A list of keys to identify which key-value tags to remove from a resource.</p>
    /// - On success, responds with [`UntagResourceOutput`](crate::output::UntagResourceOutput)

    /// - On failure, responds with [`SdkError<UntagResourceError>`](crate::error::UntagResourceError)
    pub fn untag_resource(&self) -> fluent_builders::UntagResource {
        fluent_builders::UntagResource::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateBackupPlan`](crate::client::fluent_builders::UpdateBackupPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_plan_id(impl Into<String>)`](crate::client::fluent_builders::UpdateBackupPlan::backup_plan_id) / [`set_backup_plan_id(Option<String>)`](crate::client::fluent_builders::UpdateBackupPlan::set_backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`backup_plan(BackupPlanInput)`](crate::client::fluent_builders::UpdateBackupPlan::backup_plan) / [`set_backup_plan(Option<BackupPlanInput>)`](crate::client::fluent_builders::UpdateBackupPlan::set_backup_plan): <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
    /// - On success, responds with [`UpdateBackupPlanOutput`](crate::output::UpdateBackupPlanOutput) with field(s):
    ///   - [`backup_plan_id(Option<String>)`](crate::output::UpdateBackupPlanOutput::backup_plan_id): <p>Uniquely identifies a backup plan.</p>
    ///   - [`backup_plan_arn(Option<String>)`](crate::output::UpdateBackupPlanOutput::backup_plan_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a backup plan; for example, <code>arn:aws:backup:us-east-1:123456789012:plan:8F81F553-3A74-4A3F-B93D-B3360DC80C50</code>.</p>
    ///   - [`creation_date(Option<DateTime>)`](crate::output::UpdateBackupPlanOutput::creation_date): <p>The date and time a backup plan is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationDate</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    ///   - [`version_id(Option<String>)`](crate::output::UpdateBackupPlanOutput::version_id): <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. Version Ids cannot be edited.</p>
    ///   - [`advanced_backup_settings(Option<Vec<AdvancedBackupSetting>>)`](crate::output::UpdateBackupPlanOutput::advanced_backup_settings): <p>Contains a list of <code>BackupOptions</code> for each resource type.</p>
    /// - On failure, responds with [`SdkError<UpdateBackupPlanError>`](crate::error::UpdateBackupPlanError)
    pub fn update_backup_plan(&self) -> fluent_builders::UpdateBackupPlan {
        fluent_builders::UpdateBackupPlan::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateFramework`](crate::client::fluent_builders::UpdateFramework) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`framework_name(impl Into<String>)`](crate::client::fluent_builders::UpdateFramework::framework_name) / [`set_framework_name(Option<String>)`](crate::client::fluent_builders::UpdateFramework::set_framework_name): <p>The unique name of a framework. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
    ///   - [`framework_description(impl Into<String>)`](crate::client::fluent_builders::UpdateFramework::framework_description) / [`set_framework_description(Option<String>)`](crate::client::fluent_builders::UpdateFramework::set_framework_description): <p>An optional description of the framework with a maximum 1,024 characters.</p>
    ///   - [`framework_controls(Vec<FrameworkControl>)`](crate::client::fluent_builders::UpdateFramework::framework_controls) / [`set_framework_controls(Option<Vec<FrameworkControl>>)`](crate::client::fluent_builders::UpdateFramework::set_framework_controls): <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::UpdateFramework::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::UpdateFramework::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>UpdateFrameworkInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    /// - On success, responds with [`UpdateFrameworkOutput`](crate::output::UpdateFrameworkOutput) with field(s):
    ///   - [`framework_name(Option<String>)`](crate::output::UpdateFrameworkOutput::framework_name): <p>The unique name of a framework. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
    ///   - [`framework_arn(Option<String>)`](crate::output::UpdateFrameworkOutput::framework_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`creation_time(Option<DateTime>)`](crate::output::UpdateFrameworkOutput::creation_time): <p>The date and time that a framework is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<UpdateFrameworkError>`](crate::error::UpdateFrameworkError)
    pub fn update_framework(&self) -> fluent_builders::UpdateFramework {
        fluent_builders::UpdateFramework::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateGlobalSettings`](crate::client::fluent_builders::UpdateGlobalSettings) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`global_settings(HashMap<String, String>)`](crate::client::fluent_builders::UpdateGlobalSettings::global_settings) / [`set_global_settings(Option<HashMap<String, String>>)`](crate::client::fluent_builders::UpdateGlobalSettings::set_global_settings): <p>A value for <code>isCrossAccountBackupEnabled</code> and a Region. Example: <code>update-global-settings --global-settings isCrossAccountBackupEnabled=false --region us-west-2</code>.</p>
    /// - On success, responds with [`UpdateGlobalSettingsOutput`](crate::output::UpdateGlobalSettingsOutput)

    /// - On failure, responds with [`SdkError<UpdateGlobalSettingsError>`](crate::error::UpdateGlobalSettingsError)
    pub fn update_global_settings(&self) -> fluent_builders::UpdateGlobalSettings {
        fluent_builders::UpdateGlobalSettings::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateRecoveryPointLifecycle`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`backup_vault_name(impl Into<String>)`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle::backup_vault_name) / [`set_backup_vault_name(Option<String>)`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle::set_backup_vault_name): <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
    ///   - [`recovery_point_arn(impl Into<String>)`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle::recovery_point_arn) / [`set_recovery_point_arn(Option<String>)`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle::set_recovery_point_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`lifecycle(Lifecycle)`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle::lifecycle) / [`set_lifecycle(Option<Lifecycle>)`](crate::client::fluent_builders::UpdateRecoveryPointLifecycle::set_lifecycle): <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup transitions and expires backups automatically according to the lifecycle that you define. </p>  <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>
    /// - On success, responds with [`UpdateRecoveryPointLifecycleOutput`](crate::output::UpdateRecoveryPointLifecycleOutput) with field(s):
    ///   - [`backup_vault_arn(Option<String>)`](crate::output::UpdateRecoveryPointLifecycleOutput::backup_vault_arn): <p>An ARN that uniquely identifies a backup vault; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
    ///   - [`recovery_point_arn(Option<String>)`](crate::output::UpdateRecoveryPointLifecycleOutput::recovery_point_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
    ///   - [`lifecycle(Option<Lifecycle>)`](crate::output::UpdateRecoveryPointLifecycleOutput::lifecycle): <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup transitions and expires backups automatically according to the lifecycle that you define.</p>  <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>  <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    ///   - [`calculated_lifecycle(Option<CalculatedLifecycle>)`](crate::output::UpdateRecoveryPointLifecycleOutput::calculated_lifecycle): <p>A <code>CalculatedLifecycle</code> object containing <code>DeleteAt</code> and <code>MoveToColdStorageAt</code> timestamps.</p>
    /// - On failure, responds with [`SdkError<UpdateRecoveryPointLifecycleError>`](crate::error::UpdateRecoveryPointLifecycleError)
    pub fn update_recovery_point_lifecycle(&self) -> fluent_builders::UpdateRecoveryPointLifecycle {
        fluent_builders::UpdateRecoveryPointLifecycle::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateRegionSettings`](crate::client::fluent_builders::UpdateRegionSettings) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`resource_type_opt_in_preference(HashMap<String, bool>)`](crate::client::fluent_builders::UpdateRegionSettings::resource_type_opt_in_preference) / [`set_resource_type_opt_in_preference(Option<HashMap<String, bool>>)`](crate::client::fluent_builders::UpdateRegionSettings::set_resource_type_opt_in_preference): <p>Updates the list of services along with the opt-in preferences for the Region.</p>
    ///   - [`resource_type_management_preference(HashMap<String, bool>)`](crate::client::fluent_builders::UpdateRegionSettings::resource_type_management_preference) / [`set_resource_type_management_preference(Option<HashMap<String, bool>>)`](crate::client::fluent_builders::UpdateRegionSettings::set_resource_type_management_preference): <p>Enables or disables full Backup management of backups for a resource type. To enable full Backup management for DynamoDB along with <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html"> Backup's advanced DynamoDB backup features</a>, follow the procedure to <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html#advanced-ddb-backup-enable-cli"> enable advanced DynamoDB backup programmatically</a>.</p>
    /// - On success, responds with [`UpdateRegionSettingsOutput`](crate::output::UpdateRegionSettingsOutput)

    /// - On failure, responds with [`SdkError<UpdateRegionSettingsError>`](crate::error::UpdateRegionSettingsError)
    pub fn update_region_settings(&self) -> fluent_builders::UpdateRegionSettings {
        fluent_builders::UpdateRegionSettings::new(self.handle.clone())
    }
    /// Constructs a fluent builder for the [`UpdateReportPlan`](crate::client::fluent_builders::UpdateReportPlan) operation.
    ///
    /// - The fluent builder is configurable:
    ///   - [`report_plan_name(impl Into<String>)`](crate::client::fluent_builders::UpdateReportPlan::report_plan_name) / [`set_report_plan_name(Option<String>)`](crate::client::fluent_builders::UpdateReportPlan::set_report_plan_name): <p>The unique name of the report plan. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
    ///   - [`report_plan_description(impl Into<String>)`](crate::client::fluent_builders::UpdateReportPlan::report_plan_description) / [`set_report_plan_description(Option<String>)`](crate::client::fluent_builders::UpdateReportPlan::set_report_plan_description): <p>An optional description of the report plan with a maximum 1,024 characters.</p>
    ///   - [`report_delivery_channel(ReportDeliveryChannel)`](crate::client::fluent_builders::UpdateReportPlan::report_delivery_channel) / [`set_report_delivery_channel(Option<ReportDeliveryChannel>)`](crate::client::fluent_builders::UpdateReportPlan::set_report_delivery_channel): <p>A structure that contains information about where to deliver your reports, specifically your Amazon S3 bucket name, S3 key prefix, and the formats of your reports.</p>
    ///   - [`report_setting(ReportSetting)`](crate::client::fluent_builders::UpdateReportPlan::report_setting) / [`set_report_setting(Option<ReportSetting>)`](crate::client::fluent_builders::UpdateReportPlan::set_report_setting): <p>Identifies the report template for the report. Reports are built using a report template. The report templates are:</p>  <p> <code>RESOURCE_COMPLIANCE_REPORT | CONTROL_COMPLIANCE_REPORT | BACKUP_JOB_REPORT | COPY_JOB_REPORT | RESTORE_JOB_REPORT</code> </p>  <p>If the report template is <code>RESOURCE_COMPLIANCE_REPORT</code> or <code>CONTROL_COMPLIANCE_REPORT</code>, this API resource also describes the report coverage by Amazon Web Services Regions and frameworks.</p>
    ///   - [`idempotency_token(impl Into<String>)`](crate::client::fluent_builders::UpdateReportPlan::idempotency_token) / [`set_idempotency_token(Option<String>)`](crate::client::fluent_builders::UpdateReportPlan::set_idempotency_token): <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>UpdateReportPlanInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
    /// - On success, responds with [`UpdateReportPlanOutput`](crate::output::UpdateReportPlanOutput) with field(s):
    ///   - [`report_plan_name(Option<String>)`](crate::output::UpdateReportPlanOutput::report_plan_name): <p>The unique name of the report plan.</p>
    ///   - [`report_plan_arn(Option<String>)`](crate::output::UpdateReportPlanOutput::report_plan_arn): <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
    ///   - [`creation_time(Option<DateTime>)`](crate::output::UpdateReportPlanOutput::creation_time): <p>The date and time that a report plan is created, in Unix format and Coordinated Universal Time (UTC). The value of <code>CreationTime</code> is accurate to milliseconds. For example, the value 1516925490.087 represents Friday, January 26, 2018 12:11:30.087 AM.</p>
    /// - On failure, responds with [`SdkError<UpdateReportPlanError>`](crate::error::UpdateReportPlanError)
    pub fn update_report_plan(&self) -> fluent_builders::UpdateReportPlan {
        fluent_builders::UpdateReportPlan::new(self.handle.clone())
    }
}
pub mod fluent_builders {

    //! Utilities to ergonomically construct a request to the service.
    //!
    //! Fluent builders are created through the [`Client`](crate::client::Client) by calling
    //! one if its operation methods. After parameters are set using the builder methods,
    //! the `send` method can be called to initiate the request.
    /// Fluent builder constructing a request to `CreateBackupPlan`.
    ///
    /// <p>Creates a backup plan using a backup plan name and backup rules. A backup plan is a document that contains information that Backup uses to schedule tasks that create recovery points for resources.</p>
    /// <p>If you call <code>CreateBackupPlan</code> with a plan that already exists, you receive an <code>AlreadyExistsException</code> exception.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateBackupPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::create_backup_plan_input::Builder,
    }
    impl CreateBackupPlan {
        /// Creates a new `CreateBackupPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::CreateBackupPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::CreateBackupPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateBackupPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateBackupPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
        pub fn backup_plan(mut self, input: crate::model::BackupPlanInput) -> Self {
            self.inner = self.inner.backup_plan(input);
            self
        }
        /// <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
        pub fn set_backup_plan(
            mut self,
            input: std::option::Option<crate::model::BackupPlanInput>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan(input);
            self
        }
        /// Adds a key-value pair to `BackupPlanTags`.
        ///
        /// To override the contents of this collection use [`set_backup_plan_tags`](Self::set_backup_plan_tags).
        ///
        /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair. The specified tags are assigned to all backups created with this plan.</p>
        pub fn backup_plan_tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.backup_plan_tags(k.into(), v.into());
            self
        }
        /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair. The specified tags are assigned to all backups created with this plan.</p>
        pub fn set_backup_plan_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_tags(input);
            self
        }
        /// <p>Identifies the request and allows failed requests to be retried without the risk of running the operation twice. If the request includes a <code>CreatorRequestId</code> that matches an existing backup plan, that plan is returned. This parameter is optional.</p>
        /// <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
        pub fn creator_request_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.creator_request_id(input.into());
            self
        }
        /// <p>Identifies the request and allows failed requests to be retried without the risk of running the operation twice. If the request includes a <code>CreatorRequestId</code> that matches an existing backup plan, that plan is returned. This parameter is optional.</p>
        /// <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
        pub fn set_creator_request_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_creator_request_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `CreateBackupSelection`.
    ///
    /// <p>Creates a JSON document that specifies a set of resources to assign to a backup plan. For examples, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/assigning-resources.html#assigning-resources-json">Assigning resources programmatically</a>. </p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateBackupSelection {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::create_backup_selection_input::Builder,
    }
    impl CreateBackupSelection {
        /// Creates a new `CreateBackupSelection`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::CreateBackupSelection,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::CreateBackupSelectionError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateBackupSelectionOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateBackupSelectionError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies the backup plan to be associated with the selection of resources.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies the backup plan to be associated with the selection of resources.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>Specifies the body of a request to assign a set of resources to a backup plan.</p>
        pub fn backup_selection(mut self, input: crate::model::BackupSelection) -> Self {
            self.inner = self.inner.backup_selection(input);
            self
        }
        /// <p>Specifies the body of a request to assign a set of resources to a backup plan.</p>
        pub fn set_backup_selection(
            mut self,
            input: std::option::Option<crate::model::BackupSelection>,
        ) -> Self {
            self.inner = self.inner.set_backup_selection(input);
            self
        }
        /// <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. This parameter is optional.</p>
        /// <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
        pub fn creator_request_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.creator_request_id(input.into());
            self
        }
        /// <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. This parameter is optional.</p>
        /// <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
        pub fn set_creator_request_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_creator_request_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `CreateBackupVault`.
    ///
    /// <p>Creates a logical container where backups are stored. A <code>CreateBackupVault</code> request includes a name, optionally one or more resource tags, an encryption key, and a request ID.</p> <note>
    /// <p>Do not include sensitive data, such as passport numbers, in the name of a backup vault.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateBackupVault {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::create_backup_vault_input::Builder,
    }
    impl CreateBackupVault {
        /// Creates a new `CreateBackupVault`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::CreateBackupVault,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::CreateBackupVaultError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateBackupVaultOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateBackupVaultError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// Adds a key-value pair to `BackupVaultTags`.
        ///
        /// To override the contents of this collection use [`set_backup_vault_tags`](Self::set_backup_vault_tags).
        ///
        /// <p>Metadata that you can assign to help organize the resources that you create. Each tag is a key-value pair.</p>
        pub fn backup_vault_tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.backup_vault_tags(k.into(), v.into());
            self
        }
        /// <p>Metadata that you can assign to help organize the resources that you create. Each tag is a key-value pair.</p>
        pub fn set_backup_vault_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_tags(input);
            self
        }
        /// <p>The server-side encryption key that is used to protect your backups; for example, <code>arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code>.</p>
        pub fn encryption_key_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.encryption_key_arn(input.into());
            self
        }
        /// <p>The server-side encryption key that is used to protect your backups; for example, <code>arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab</code>.</p>
        pub fn set_encryption_key_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_encryption_key_arn(input);
            self
        }
        /// <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. This parameter is optional.</p>
        /// <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
        pub fn creator_request_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.creator_request_id(input.into());
            self
        }
        /// <p>A unique string that identifies the request and allows failed requests to be retried without the risk of running the operation twice. This parameter is optional.</p>
        /// <p>If used, this parameter must contain 1 to 50 alphanumeric or '-_.' characters.</p>
        pub fn set_creator_request_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_creator_request_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `CreateFramework`.
    ///
    /// <p>Creates a framework with one or more controls. A framework is a collection of controls that you can use to evaluate your backup practices. By using pre-built customizable controls to define your policies, you can evaluate whether your backup practices comply with your policies and which resources are not yet in compliance.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateFramework {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::create_framework_input::Builder,
    }
    impl CreateFramework {
        /// Creates a new `CreateFramework`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::CreateFramework,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::CreateFrameworkError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateFrameworkOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateFrameworkError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of the framework. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn framework_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.framework_name(input.into());
            self
        }
        /// <p>The unique name of the framework. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn set_framework_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_framework_name(input);
            self
        }
        /// <p>An optional description of the framework with a maximum of 1,024 characters.</p>
        pub fn framework_description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.framework_description(input.into());
            self
        }
        /// <p>An optional description of the framework with a maximum of 1,024 characters.</p>
        pub fn set_framework_description(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_framework_description(input);
            self
        }
        /// Appends an item to `FrameworkControls`.
        ///
        /// To override the contents of this collection use [`set_framework_controls`](Self::set_framework_controls).
        ///
        /// <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
        pub fn framework_controls(mut self, input: crate::model::FrameworkControl) -> Self {
            self.inner = self.inner.framework_controls(input);
            self
        }
        /// <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
        pub fn set_framework_controls(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::FrameworkControl>>,
        ) -> Self {
            self.inner = self.inner.set_framework_controls(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>CreateFrameworkInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>CreateFrameworkInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
        /// Adds a key-value pair to `FrameworkTags`.
        ///
        /// To override the contents of this collection use [`set_framework_tags`](Self::set_framework_tags).
        ///
        /// <p>Metadata that you can assign to help organize the frameworks that you create. Each tag is a key-value pair.</p>
        pub fn framework_tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.framework_tags(k.into(), v.into());
            self
        }
        /// <p>Metadata that you can assign to help organize the frameworks that you create. Each tag is a key-value pair.</p>
        pub fn set_framework_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_framework_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `CreateReportPlan`.
    ///
    /// <p>Creates a report plan. A report plan is a document that contains information about the contents of the report and where Backup will deliver it.</p>
    /// <p>If you call <code>CreateReportPlan</code> with a plan that already exists, you receive an <code>AlreadyExistsException</code> exception.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct CreateReportPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::create_report_plan_input::Builder,
    }
    impl CreateReportPlan {
        /// Creates a new `CreateReportPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::CreateReportPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::CreateReportPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::CreateReportPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::CreateReportPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of the report plan. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn report_plan_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_name(input.into());
            self
        }
        /// <p>The unique name of the report plan. The name must be between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn set_report_plan_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_name(input);
            self
        }
        /// <p>An optional description of the report plan with a maximum of 1,024 characters.</p>
        pub fn report_plan_description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_description(input.into());
            self
        }
        /// <p>An optional description of the report plan with a maximum of 1,024 characters.</p>
        pub fn set_report_plan_description(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_description(input);
            self
        }
        /// <p>A structure that contains information about where and how to deliver your reports, specifically your Amazon S3 bucket name, S3 key prefix, and the formats of your reports.</p>
        pub fn report_delivery_channel(
            mut self,
            input: crate::model::ReportDeliveryChannel,
        ) -> Self {
            self.inner = self.inner.report_delivery_channel(input);
            self
        }
        /// <p>A structure that contains information about where and how to deliver your reports, specifically your Amazon S3 bucket name, S3 key prefix, and the formats of your reports.</p>
        pub fn set_report_delivery_channel(
            mut self,
            input: std::option::Option<crate::model::ReportDeliveryChannel>,
        ) -> Self {
            self.inner = self.inner.set_report_delivery_channel(input);
            self
        }
        /// <p>Identifies the report template for the report. Reports are built using a report template. The report templates are:</p>
        /// <p> <code>RESOURCE_COMPLIANCE_REPORT | CONTROL_COMPLIANCE_REPORT | BACKUP_JOB_REPORT | COPY_JOB_REPORT | RESTORE_JOB_REPORT</code> </p>
        /// <p>If the report template is <code>RESOURCE_COMPLIANCE_REPORT</code> or <code>CONTROL_COMPLIANCE_REPORT</code>, this API resource also describes the report coverage by Amazon Web Services Regions and frameworks.</p>
        pub fn report_setting(mut self, input: crate::model::ReportSetting) -> Self {
            self.inner = self.inner.report_setting(input);
            self
        }
        /// <p>Identifies the report template for the report. Reports are built using a report template. The report templates are:</p>
        /// <p> <code>RESOURCE_COMPLIANCE_REPORT | CONTROL_COMPLIANCE_REPORT | BACKUP_JOB_REPORT | COPY_JOB_REPORT | RESTORE_JOB_REPORT</code> </p>
        /// <p>If the report template is <code>RESOURCE_COMPLIANCE_REPORT</code> or <code>CONTROL_COMPLIANCE_REPORT</code>, this API resource also describes the report coverage by Amazon Web Services Regions and frameworks.</p>
        pub fn set_report_setting(
            mut self,
            input: std::option::Option<crate::model::ReportSetting>,
        ) -> Self {
            self.inner = self.inner.set_report_setting(input);
            self
        }
        /// Adds a key-value pair to `ReportPlanTags`.
        ///
        /// To override the contents of this collection use [`set_report_plan_tags`](Self::set_report_plan_tags).
        ///
        /// <p>Metadata that you can assign to help organize the report plans that you create. Each tag is a key-value pair.</p>
        pub fn report_plan_tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.report_plan_tags(k.into(), v.into());
            self
        }
        /// <p>Metadata that you can assign to help organize the report plans that you create. Each tag is a key-value pair.</p>
        pub fn set_report_plan_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_report_plan_tags(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>CreateReportPlanInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>CreateReportPlanInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteBackupPlan`.
    ///
    /// <p>Deletes a backup plan. A backup plan can only be deleted after all associated selections of resources have been deleted. Deleting a backup plan deletes the current version of a backup plan. Previous versions, if any, will still exist.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteBackupPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_backup_plan_input::Builder,
    }
    impl DeleteBackupPlan {
        /// Creates a new `DeleteBackupPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteBackupPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteBackupPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteBackupSelection`.
    ///
    /// <p>Deletes the resource selection associated with a backup plan that is specified by the <code>SelectionId</code>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteBackupSelection {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_backup_selection_input::Builder,
    }
    impl DeleteBackupSelection {
        /// Creates a new `DeleteBackupSelection`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteBackupSelection,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupSelectionError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteBackupSelectionOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupSelectionError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
        pub fn selection_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.selection_id(input.into());
            self
        }
        /// <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
        pub fn set_selection_id(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_selection_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteBackupVault`.
    ///
    /// <p>Deletes the backup vault identified by its name. A vault can be deleted only if it is empty.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteBackupVault {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_backup_vault_input::Builder,
    }
    impl DeleteBackupVault {
        /// Creates a new `DeleteBackupVault`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteBackupVault,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupVaultError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteBackupVaultOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupVaultError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteBackupVaultAccessPolicy`.
    ///
    /// <p>Deletes the policy document that manages permissions on a backup vault.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteBackupVaultAccessPolicy {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_backup_vault_access_policy_input::Builder,
    }
    impl DeleteBackupVaultAccessPolicy {
        /// Creates a new `DeleteBackupVaultAccessPolicy`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteBackupVaultAccessPolicy,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupVaultAccessPolicyError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteBackupVaultAccessPolicyOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupVaultAccessPolicyError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteBackupVaultLockConfiguration`.
    ///
    /// <p>Deletes Backup Vault Lock from a backup vault specified by a backup vault name.</p>
    /// <p>If the Vault Lock configuration is immutable, then you cannot delete Vault Lock using API operations, and you will receive an <code>InvalidRequestException</code> if you attempt to do so. For more information, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/vault-lock.html">Vault Lock</a> in the <i>Backup Developer Guide</i>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteBackupVaultLockConfiguration {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_backup_vault_lock_configuration_input::Builder,
    }
    impl DeleteBackupVaultLockConfiguration {
        /// Creates a new `DeleteBackupVaultLockConfiguration`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteBackupVaultLockConfiguration,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<
                crate::error::DeleteBackupVaultLockConfigurationError,
            >,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteBackupVaultLockConfigurationOutput,
            aws_smithy_http::result::SdkError<
                crate::error::DeleteBackupVaultLockConfigurationError,
            >,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of the backup vault from which to delete Backup Vault Lock.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of the backup vault from which to delete Backup Vault Lock.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteBackupVaultNotifications`.
    ///
    /// <p>Deletes event notifications for the specified backup vault.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteBackupVaultNotifications {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_backup_vault_notifications_input::Builder,
    }
    impl DeleteBackupVaultNotifications {
        /// Creates a new `DeleteBackupVaultNotifications`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteBackupVaultNotifications,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupVaultNotificationsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteBackupVaultNotificationsOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteBackupVaultNotificationsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteFramework`.
    ///
    /// <p>Deletes the framework specified by a framework name.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteFramework {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_framework_input::Builder,
    }
    impl DeleteFramework {
        /// Creates a new `DeleteFramework`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteFramework,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteFrameworkError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteFrameworkOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteFrameworkError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of a framework.</p>
        pub fn framework_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.framework_name(input.into());
            self
        }
        /// <p>The unique name of a framework.</p>
        pub fn set_framework_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_framework_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteRecoveryPoint`.
    ///
    /// <p>Deletes the recovery point specified by a recovery point ID.</p>
    /// <p>If the recovery point ID belongs to a continuous backup, calling this endpoint deletes the existing continuous backup and stops future continuous backup.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteRecoveryPoint {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_recovery_point_input::Builder,
    }
    impl DeleteRecoveryPoint {
        /// Creates a new `DeleteRecoveryPoint`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteRecoveryPoint,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteRecoveryPointError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteRecoveryPointOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteRecoveryPointError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DeleteReportPlan`.
    ///
    /// <p>Deletes the report plan specified by a report plan name.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DeleteReportPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::delete_report_plan_input::Builder,
    }
    impl DeleteReportPlan {
        /// Creates a new `DeleteReportPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DeleteReportPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DeleteReportPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DeleteReportPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::DeleteReportPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of a report plan.</p>
        pub fn report_plan_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_name(input.into());
            self
        }
        /// <p>The unique name of a report plan.</p>
        pub fn set_report_plan_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeBackupJob`.
    ///
    /// <p>Returns backup job details for the specified <code>BackupJobId</code>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeBackupJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_backup_job_input::Builder,
    }
    impl DescribeBackupJob {
        /// Creates a new `DescribeBackupJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeBackupJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeBackupJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeBackupJobOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeBackupJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a request to Backup to back up a resource.</p>
        pub fn backup_job_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_job_id(input.into());
            self
        }
        /// <p>Uniquely identifies a request to Backup to back up a resource.</p>
        pub fn set_backup_job_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_job_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeBackupVault`.
    ///
    /// <p>Returns metadata about a backup vault specified by its name.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeBackupVault {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_backup_vault_input::Builder,
    }
    impl DescribeBackupVault {
        /// Creates a new `DescribeBackupVault`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeBackupVault,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeBackupVaultError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeBackupVaultOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeBackupVaultError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeCopyJob`.
    ///
    /// <p>Returns metadata associated with creating a copy of a resource.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeCopyJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_copy_job_input::Builder,
    }
    impl DescribeCopyJob {
        /// Creates a new `DescribeCopyJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeCopyJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeCopyJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeCopyJobOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeCopyJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a copy job.</p>
        pub fn copy_job_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.copy_job_id(input.into());
            self
        }
        /// <p>Uniquely identifies a copy job.</p>
        pub fn set_copy_job_id(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_copy_job_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeFramework`.
    ///
    /// <p>Returns the framework details for the specified <code>FrameworkName</code>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeFramework {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_framework_input::Builder,
    }
    impl DescribeFramework {
        /// Creates a new `DescribeFramework`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeFramework,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeFrameworkError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeFrameworkOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeFrameworkError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of a framework.</p>
        pub fn framework_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.framework_name(input.into());
            self
        }
        /// <p>The unique name of a framework.</p>
        pub fn set_framework_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_framework_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeGlobalSettings`.
    ///
    /// <p>Describes whether the Amazon Web Services account is opted in to cross-account backup. Returns an error if the account is not a member of an Organizations organization. Example: <code>describe-global-settings --region us-west-2</code> </p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeGlobalSettings {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_global_settings_input::Builder,
    }
    impl DescribeGlobalSettings {
        /// Creates a new `DescribeGlobalSettings`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeGlobalSettings,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeGlobalSettingsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeGlobalSettingsOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeGlobalSettingsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
    }
    /// Fluent builder constructing a request to `DescribeProtectedResource`.
    ///
    /// <p>Returns information about a saved resource, including the last time it was backed up, its Amazon Resource Name (ARN), and the Amazon Web Services service type of the saved resource.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeProtectedResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_protected_resource_input::Builder,
    }
    impl DescribeProtectedResource {
        /// Creates a new `DescribeProtectedResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeProtectedResource,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeProtectedResourceError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeProtectedResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeProtectedResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeRecoveryPoint`.
    ///
    /// <p>Returns metadata associated with a recovery point, including ID, status, encryption, and lifecycle.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeRecoveryPoint {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_recovery_point_input::Builder,
    }
    impl DescribeRecoveryPoint {
        /// Creates a new `DescribeRecoveryPoint`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeRecoveryPoint,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeRecoveryPointError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeRecoveryPointOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeRecoveryPointError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeRegionSettings`.
    ///
    /// <p>Returns the current service opt-in settings for the Region. If service opt-in is enabled for a service, Backup tries to protect that service's resources in this Region, when the resource is included in an on-demand backup or scheduled backup plan. Otherwise, Backup does not try to protect that service's resources in this Region.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeRegionSettings {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_region_settings_input::Builder,
    }
    impl DescribeRegionSettings {
        /// Creates a new `DescribeRegionSettings`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeRegionSettings,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeRegionSettingsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeRegionSettingsOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeRegionSettingsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
    }
    /// Fluent builder constructing a request to `DescribeReportJob`.
    ///
    /// <p>Returns the details associated with creating a report as specified by its <code>ReportJobId</code>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeReportJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_report_job_input::Builder,
    }
    impl DescribeReportJob {
        /// Creates a new `DescribeReportJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeReportJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeReportJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeReportJobOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeReportJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The identifier of the report job. A unique, randomly generated, Unicode, UTF-8 encoded string that is at most 1,024 bytes long. The report job ID cannot be edited.</p>
        pub fn report_job_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_job_id(input.into());
            self
        }
        /// <p>The identifier of the report job. A unique, randomly generated, Unicode, UTF-8 encoded string that is at most 1,024 bytes long. The report job ID cannot be edited.</p>
        pub fn set_report_job_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_job_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeReportPlan`.
    ///
    /// <p>Returns a list of all report plans for an Amazon Web Services account and Amazon Web Services Region.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeReportPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_report_plan_input::Builder,
    }
    impl DescribeReportPlan {
        /// Creates a new `DescribeReportPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeReportPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeReportPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeReportPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeReportPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of a report plan.</p>
        pub fn report_plan_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_name(input.into());
            self
        }
        /// <p>The unique name of a report plan.</p>
        pub fn set_report_plan_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DescribeRestoreJob`.
    ///
    /// <p>Returns metadata associated with a restore job that is specified by a job ID.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DescribeRestoreJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::describe_restore_job_input::Builder,
    }
    impl DescribeRestoreJob {
        /// Creates a new `DescribeRestoreJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DescribeRestoreJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DescribeRestoreJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DescribeRestoreJobOutput,
            aws_smithy_http::result::SdkError<crate::error::DescribeRestoreJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies the job that restores a recovery point.</p>
        pub fn restore_job_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.restore_job_id(input.into());
            self
        }
        /// <p>Uniquely identifies the job that restores a recovery point.</p>
        pub fn set_restore_job_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_restore_job_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `DisassociateRecoveryPoint`.
    ///
    /// <p>Deletes the specified continuous backup recovery point from Backup and releases control of that continuous backup to the source service, such as Amazon RDS. The source service will continue to create and retain continuous backups using the lifecycle that you specified in your original backup plan.</p>
    /// <p>Does not support snapshot backup recovery points.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct DisassociateRecoveryPoint {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::disassociate_recovery_point_input::Builder,
    }
    impl DisassociateRecoveryPoint {
        /// Creates a new `DisassociateRecoveryPoint`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::DisassociateRecoveryPoint,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::DisassociateRecoveryPointError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::DisassociateRecoveryPointOutput,
            aws_smithy_http::result::SdkError<crate::error::DisassociateRecoveryPointError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of an Backup vault.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The unique name of an Backup vault.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies an Backup recovery point.</p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies an Backup recovery point.</p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ExportBackupPlanTemplate`.
    ///
    /// <p>Returns the backup plan that is specified by the plan ID as a backup template.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ExportBackupPlanTemplate {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::export_backup_plan_template_input::Builder,
    }
    impl ExportBackupPlanTemplate {
        /// Creates a new `ExportBackupPlanTemplate`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ExportBackupPlanTemplate,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ExportBackupPlanTemplateError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ExportBackupPlanTemplateOutput,
            aws_smithy_http::result::SdkError<crate::error::ExportBackupPlanTemplateError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetBackupPlan`.
    ///
    /// <p>Returns <code>BackupPlan</code> details for the specified <code>BackupPlanId</code>. The details are the body of a backup plan in JSON format, in addition to plan metadata.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetBackupPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_backup_plan_input::Builder,
    }
    impl GetBackupPlan {
        /// Creates a new `GetBackupPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetBackupPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetBackupPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetBackupPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::GetBackupPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. Version IDs cannot be edited.</p>
        pub fn version_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.version_id(input.into());
            self
        }
        /// <p>Unique, randomly generated, Unicode, UTF-8 encoded strings that are at most 1,024 bytes long. Version IDs cannot be edited.</p>
        pub fn set_version_id(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_version_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetBackupPlanFromJSON`.
    ///
    /// <p>Returns a valid JSON document specifying a backup plan or an error.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetBackupPlanFromJSON {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_backup_plan_from_json_input::Builder,
    }
    impl GetBackupPlanFromJSON {
        /// Creates a new `GetBackupPlanFromJSON`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetBackupPlanFromJSON,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetBackupPlanFromJSONError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetBackupPlanFromJsonOutput,
            aws_smithy_http::result::SdkError<crate::error::GetBackupPlanFromJSONError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>A customer-supplied backup plan document in JSON format.</p>
        pub fn backup_plan_template_json(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_template_json(input.into());
            self
        }
        /// <p>A customer-supplied backup plan document in JSON format.</p>
        pub fn set_backup_plan_template_json(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_template_json(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetBackupPlanFromTemplate`.
    ///
    /// <p>Returns the template specified by its <code>templateId</code> as a backup plan.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetBackupPlanFromTemplate {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_backup_plan_from_template_input::Builder,
    }
    impl GetBackupPlanFromTemplate {
        /// Creates a new `GetBackupPlanFromTemplate`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetBackupPlanFromTemplate,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetBackupPlanFromTemplateError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetBackupPlanFromTemplateOutput,
            aws_smithy_http::result::SdkError<crate::error::GetBackupPlanFromTemplateError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a stored backup plan template.</p>
        pub fn backup_plan_template_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_template_id(input.into());
            self
        }
        /// <p>Uniquely identifies a stored backup plan template.</p>
        pub fn set_backup_plan_template_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_template_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetBackupSelection`.
    ///
    /// <p>Returns selection metadata and a document in JSON format that specifies a list of resources that are associated with a backup plan.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetBackupSelection {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_backup_selection_input::Builder,
    }
    impl GetBackupSelection {
        /// Creates a new `GetBackupSelection`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetBackupSelection,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetBackupSelectionError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetBackupSelectionOutput,
            aws_smithy_http::result::SdkError<crate::error::GetBackupSelectionError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
        pub fn selection_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.selection_id(input.into());
            self
        }
        /// <p>Uniquely identifies the body of a request to assign a set of resources to a backup plan.</p>
        pub fn set_selection_id(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_selection_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetBackupVaultAccessPolicy`.
    ///
    /// <p>Returns the access policy document that is associated with the named backup vault.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetBackupVaultAccessPolicy {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_backup_vault_access_policy_input::Builder,
    }
    impl GetBackupVaultAccessPolicy {
        /// Creates a new `GetBackupVaultAccessPolicy`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetBackupVaultAccessPolicy,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetBackupVaultAccessPolicyError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetBackupVaultAccessPolicyOutput,
            aws_smithy_http::result::SdkError<crate::error::GetBackupVaultAccessPolicyError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetBackupVaultNotifications`.
    ///
    /// <p>Returns event notifications for the specified backup vault.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetBackupVaultNotifications {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_backup_vault_notifications_input::Builder,
    }
    impl GetBackupVaultNotifications {
        /// Creates a new `GetBackupVaultNotifications`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetBackupVaultNotifications,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetBackupVaultNotificationsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetBackupVaultNotificationsOutput,
            aws_smithy_http::result::SdkError<crate::error::GetBackupVaultNotificationsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetRecoveryPointRestoreMetadata`.
    ///
    /// <p>Returns a set of metadata key-value pairs that were used to create the backup.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetRecoveryPointRestoreMetadata {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_recovery_point_restore_metadata_input::Builder,
    }
    impl GetRecoveryPointRestoreMetadata {
        /// Creates a new `GetRecoveryPointRestoreMetadata`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetRecoveryPointRestoreMetadata,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetRecoveryPointRestoreMetadataError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetRecoveryPointRestoreMetadataOutput,
            aws_smithy_http::result::SdkError<crate::error::GetRecoveryPointRestoreMetadataError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
    }
    /// Fluent builder constructing a request to `GetSupportedResourceTypes`.
    ///
    /// <p>Returns the Amazon Web Services resource types supported by Backup.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct GetSupportedResourceTypes {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::get_supported_resource_types_input::Builder,
    }
    impl GetSupportedResourceTypes {
        /// Creates a new `GetSupportedResourceTypes`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::GetSupportedResourceTypes,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::GetSupportedResourceTypesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::GetSupportedResourceTypesOutput,
            aws_smithy_http::result::SdkError<crate::error::GetSupportedResourceTypesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
    }
    /// Fluent builder constructing a request to `ListBackupJobs`.
    ///
    /// <p>Returns a list of existing backup jobs for an authenticated account for the last 30 days. For a longer period of time, consider using these <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/monitoring.html">monitoring tools</a>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListBackupJobs {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_backup_jobs_input::Builder,
    }
    impl ListBackupJobs {
        /// Creates a new `ListBackupJobs`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListBackupJobs,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListBackupJobsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListBackupJobsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListBackupJobsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListBackupJobsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListBackupJobsPaginator {
            crate::paginator::ListBackupJobsPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>Returns only backup jobs that match the specified resource Amazon Resource Name (ARN).</p>
        pub fn by_resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_resource_arn(input.into());
            self
        }
        /// <p>Returns only backup jobs that match the specified resource Amazon Resource Name (ARN).</p>
        pub fn set_by_resource_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_resource_arn(input);
            self
        }
        /// <p>Returns only backup jobs that are in the specified state.</p>
        pub fn by_state(mut self, input: crate::model::BackupJobState) -> Self {
            self.inner = self.inner.by_state(input);
            self
        }
        /// <p>Returns only backup jobs that are in the specified state.</p>
        pub fn set_by_state(
            mut self,
            input: std::option::Option<crate::model::BackupJobState>,
        ) -> Self {
            self.inner = self.inner.set_by_state(input);
            self
        }
        /// <p>Returns only backup jobs that will be stored in the specified backup vault. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn by_backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_backup_vault_name(input.into());
            self
        }
        /// <p>Returns only backup jobs that will be stored in the specified backup vault. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_by_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_backup_vault_name(input);
            self
        }
        /// <p>Returns only backup jobs that were created before the specified date.</p>
        pub fn by_created_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_before(input);
            self
        }
        /// <p>Returns only backup jobs that were created before the specified date.</p>
        pub fn set_by_created_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_before(input);
            self
        }
        /// <p>Returns only backup jobs that were created after the specified date.</p>
        pub fn by_created_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_after(input);
            self
        }
        /// <p>Returns only backup jobs that were created after the specified date.</p>
        pub fn set_by_created_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_after(input);
            self
        }
        /// <p>Returns only backup jobs for the specified resources:</p>
        /// <ul>
        /// <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>
        /// <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>
        /// <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>
        /// <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>
        /// <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>
        /// <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>
        /// <li> <p> <code>FSx</code> for Amazon FSx</p> </li>
        /// <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>
        /// <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>
        /// <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>
        /// <li> <p> <code>S3</code> for Amazon S3</p> </li>
        /// <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>
        /// </ul>
        pub fn by_resource_type(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_resource_type(input.into());
            self
        }
        /// <p>Returns only backup jobs for the specified resources:</p>
        /// <ul>
        /// <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>
        /// <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>
        /// <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>
        /// <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>
        /// <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>
        /// <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>
        /// <li> <p> <code>FSx</code> for Amazon FSx</p> </li>
        /// <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>
        /// <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>
        /// <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>
        /// <li> <p> <code>S3</code> for Amazon S3</p> </li>
        /// <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>
        /// </ul>
        pub fn set_by_resource_type(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_resource_type(input);
            self
        }
        /// <p>The account ID to list the jobs from. Returns only backup jobs associated with the specified account ID.</p>
        /// <p>If used from an Organizations management account, passing <code>*</code> returns all jobs across the organization.</p>
        pub fn by_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_account_id(input.into());
            self
        }
        /// <p>The account ID to list the jobs from. Returns only backup jobs associated with the specified account ID.</p>
        /// <p>If used from an Organizations management account, passing <code>*</code> returns all jobs across the organization.</p>
        pub fn set_by_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_account_id(input);
            self
        }
        /// <p>Returns only backup jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn by_complete_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_complete_after(input);
            self
        }
        /// <p>Returns only backup jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn set_by_complete_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_complete_after(input);
            self
        }
        /// <p>Returns only backup jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn by_complete_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_complete_before(input);
            self
        }
        /// <p>Returns only backup jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn set_by_complete_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_complete_before(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListBackupPlans`.
    ///
    /// <p>Returns a list of all active backup plans for an authenticated account. The list contains information such as Amazon Resource Names (ARNs), plan IDs, creation and deletion dates, version IDs, plan names, and creator request IDs.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListBackupPlans {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_backup_plans_input::Builder,
    }
    impl ListBackupPlans {
        /// Creates a new `ListBackupPlans`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListBackupPlans,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListBackupPlansError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListBackupPlansOutput,
            aws_smithy_http::result::SdkError<crate::error::ListBackupPlansError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListBackupPlansPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListBackupPlansPaginator {
            crate::paginator::ListBackupPlansPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>A Boolean value with a default value of <code>FALSE</code> that returns deleted backup plans when set to <code>TRUE</code>.</p>
        pub fn include_deleted(mut self, input: bool) -> Self {
            self.inner = self.inner.include_deleted(input);
            self
        }
        /// <p>A Boolean value with a default value of <code>FALSE</code> that returns deleted backup plans when set to <code>TRUE</code>.</p>
        pub fn set_include_deleted(mut self, input: std::option::Option<bool>) -> Self {
            self.inner = self.inner.set_include_deleted(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListBackupPlanTemplates`.
    ///
    /// <p>Returns metadata of your saved backup plan templates, including the template ID, name, and the creation and deletion dates.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListBackupPlanTemplates {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_backup_plan_templates_input::Builder,
    }
    impl ListBackupPlanTemplates {
        /// Creates a new `ListBackupPlanTemplates`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListBackupPlanTemplates,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListBackupPlanTemplatesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListBackupPlanTemplatesOutput,
            aws_smithy_http::result::SdkError<crate::error::ListBackupPlanTemplatesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListBackupPlanTemplatesPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListBackupPlanTemplatesPaginator {
            crate::paginator::ListBackupPlanTemplatesPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListBackupPlanVersions`.
    ///
    /// <p>Returns version metadata of your backup plans, including Amazon Resource Names (ARNs), backup plan IDs, creation and deletion dates, plan names, and version IDs.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListBackupPlanVersions {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_backup_plan_versions_input::Builder,
    }
    impl ListBackupPlanVersions {
        /// Creates a new `ListBackupPlanVersions`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListBackupPlanVersions,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListBackupPlanVersionsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListBackupPlanVersionsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListBackupPlanVersionsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListBackupPlanVersionsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListBackupPlanVersionsPaginator {
            crate::paginator::ListBackupPlanVersionsPaginator::new(self.handle, self.inner)
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListBackupSelections`.
    ///
    /// <p>Returns an array containing metadata of the resources associated with the target backup plan.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListBackupSelections {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_backup_selections_input::Builder,
    }
    impl ListBackupSelections {
        /// Creates a new `ListBackupSelections`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListBackupSelections,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListBackupSelectionsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListBackupSelectionsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListBackupSelectionsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListBackupSelectionsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListBackupSelectionsPaginator {
            crate::paginator::ListBackupSelectionsPaginator::new(self.handle, self.inner)
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListBackupVaults`.
    ///
    /// <p>Returns a list of recovery point storage containers along with information about them.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListBackupVaults {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_backup_vaults_input::Builder,
    }
    impl ListBackupVaults {
        /// Creates a new `ListBackupVaults`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListBackupVaults,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListBackupVaultsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListBackupVaultsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListBackupVaultsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListBackupVaultsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListBackupVaultsPaginator {
            crate::paginator::ListBackupVaultsPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListCopyJobs`.
    ///
    /// <p>Returns metadata about your copy jobs.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListCopyJobs {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_copy_jobs_input::Builder,
    }
    impl ListCopyJobs {
        /// Creates a new `ListCopyJobs`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListCopyJobs,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListCopyJobsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListCopyJobsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListCopyJobsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListCopyJobsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListCopyJobsPaginator {
            crate::paginator::ListCopyJobsPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token. </p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return maxResults number of items, NextToken allows you to return more items in your list starting at the location pointed to by the next token. </p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>Returns only copy jobs that match the specified resource Amazon Resource Name (ARN). </p>
        pub fn by_resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_resource_arn(input.into());
            self
        }
        /// <p>Returns only copy jobs that match the specified resource Amazon Resource Name (ARN). </p>
        pub fn set_by_resource_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_resource_arn(input);
            self
        }
        /// <p>Returns only copy jobs that are in the specified state.</p>
        pub fn by_state(mut self, input: crate::model::CopyJobState) -> Self {
            self.inner = self.inner.by_state(input);
            self
        }
        /// <p>Returns only copy jobs that are in the specified state.</p>
        pub fn set_by_state(
            mut self,
            input: std::option::Option<crate::model::CopyJobState>,
        ) -> Self {
            self.inner = self.inner.set_by_state(input);
            self
        }
        /// <p>Returns only copy jobs that were created before the specified date.</p>
        pub fn by_created_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_before(input);
            self
        }
        /// <p>Returns only copy jobs that were created before the specified date.</p>
        pub fn set_by_created_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_before(input);
            self
        }
        /// <p>Returns only copy jobs that were created after the specified date.</p>
        pub fn by_created_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_after(input);
            self
        }
        /// <p>Returns only copy jobs that were created after the specified date.</p>
        pub fn set_by_created_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_after(input);
            self
        }
        /// <p>Returns only backup jobs for the specified resources:</p>
        /// <ul>
        /// <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>
        /// <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>
        /// <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>
        /// <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>
        /// <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>
        /// <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>
        /// <li> <p> <code>FSx</code> for Amazon FSx</p> </li>
        /// <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>
        /// <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>
        /// <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>
        /// <li> <p> <code>S3</code> for Amazon S3</p> </li>
        /// <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>
        /// </ul>
        pub fn by_resource_type(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_resource_type(input.into());
            self
        }
        /// <p>Returns only backup jobs for the specified resources:</p>
        /// <ul>
        /// <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>
        /// <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>
        /// <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>
        /// <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>
        /// <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>
        /// <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>
        /// <li> <p> <code>FSx</code> for Amazon FSx</p> </li>
        /// <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>
        /// <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>
        /// <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>
        /// <li> <p> <code>S3</code> for Amazon S3</p> </li>
        /// <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>
        /// </ul>
        pub fn set_by_resource_type(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_resource_type(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a source backup vault to copy from; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>. </p>
        pub fn by_destination_vault_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_destination_vault_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a source backup vault to copy from; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>. </p>
        pub fn set_by_destination_vault_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_destination_vault_arn(input);
            self
        }
        /// <p>The account ID to list the jobs from. Returns only copy jobs associated with the specified account ID.</p>
        pub fn by_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_account_id(input.into());
            self
        }
        /// <p>The account ID to list the jobs from. Returns only copy jobs associated with the specified account ID.</p>
        pub fn set_by_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_account_id(input);
            self
        }
        /// <p>Returns only copy jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn by_complete_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_complete_before(input);
            self
        }
        /// <p>Returns only copy jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn set_by_complete_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_complete_before(input);
            self
        }
        /// <p>Returns only copy jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn by_complete_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_complete_after(input);
            self
        }
        /// <p>Returns only copy jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn set_by_complete_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_complete_after(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListFrameworks`.
    ///
    /// <p>Returns a list of all frameworks for an Amazon Web Services account and Amazon Web Services Region.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListFrameworks {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_frameworks_input::Builder,
    }
    impl ListFrameworks {
        /// Creates a new `ListFrameworks`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListFrameworks,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListFrameworksError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListFrameworksOutput,
            aws_smithy_http::result::SdkError<crate::error::ListFrameworksError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListFrameworksPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListFrameworksPaginator {
            crate::paginator::ListFrameworksPaginator::new(self.handle, self.inner)
        }
        /// <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListProtectedResources`.
    ///
    /// <p>Returns an array of resources successfully backed up by Backup, including the time the resource was saved, an Amazon Resource Name (ARN) of the resource, and a resource type.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListProtectedResources {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_protected_resources_input::Builder,
    }
    impl ListProtectedResources {
        /// Creates a new `ListProtectedResources`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListProtectedResources,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListProtectedResourcesError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListProtectedResourcesOutput,
            aws_smithy_http::result::SdkError<crate::error::ListProtectedResourcesError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListProtectedResourcesPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListProtectedResourcesPaginator {
            crate::paginator::ListProtectedResourcesPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListRecoveryPointsByBackupVault`.
    ///
    /// <p>Returns detailed information about the recovery points stored in a backup vault.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListRecoveryPointsByBackupVault {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_recovery_points_by_backup_vault_input::Builder,
    }
    impl ListRecoveryPointsByBackupVault {
        /// Creates a new `ListRecoveryPointsByBackupVault`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListRecoveryPointsByBackupVault,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListRecoveryPointsByBackupVaultError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListRecoveryPointsByBackupVaultOutput,
            aws_smithy_http::result::SdkError<crate::error::ListRecoveryPointsByBackupVaultError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListRecoveryPointsByBackupVaultPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListRecoveryPointsByBackupVaultPaginator {
            crate::paginator::ListRecoveryPointsByBackupVaultPaginator::new(self.handle, self.inner)
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p> <note>
        /// <p>Backup vault name might not be available when a supported service creates the backup.</p>
        /// </note>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p> <note>
        /// <p>Backup vault name might not be available when a supported service creates the backup.</p>
        /// </note>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>Returns only recovery points that match the specified resource Amazon Resource Name (ARN).</p>
        pub fn by_resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_resource_arn(input.into());
            self
        }
        /// <p>Returns only recovery points that match the specified resource Amazon Resource Name (ARN).</p>
        pub fn set_by_resource_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_resource_arn(input);
            self
        }
        /// <p>Returns only recovery points that match the specified resource type.</p>
        pub fn by_resource_type(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_resource_type(input.into());
            self
        }
        /// <p>Returns only recovery points that match the specified resource type.</p>
        pub fn set_by_resource_type(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_resource_type(input);
            self
        }
        /// <p>Returns only recovery points that match the specified backup plan ID.</p>
        pub fn by_backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_backup_plan_id(input.into());
            self
        }
        /// <p>Returns only recovery points that match the specified backup plan ID.</p>
        pub fn set_by_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_backup_plan_id(input);
            self
        }
        /// <p>Returns only recovery points that were created before the specified timestamp.</p>
        pub fn by_created_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_before(input);
            self
        }
        /// <p>Returns only recovery points that were created before the specified timestamp.</p>
        pub fn set_by_created_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_before(input);
            self
        }
        /// <p>Returns only recovery points that were created after the specified timestamp.</p>
        pub fn by_created_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_after(input);
            self
        }
        /// <p>Returns only recovery points that were created after the specified timestamp.</p>
        pub fn set_by_created_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_after(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListRecoveryPointsByResource`.
    ///
    /// <p>Returns detailed information about all the recovery points of the type specified by a resource Amazon Resource Name (ARN).</p> <note>
    /// <p>For Amazon EFS and Amazon EC2, this action only lists recovery points created by Backup.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListRecoveryPointsByResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_recovery_points_by_resource_input::Builder,
    }
    impl ListRecoveryPointsByResource {
        /// Creates a new `ListRecoveryPointsByResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListRecoveryPointsByResource,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListRecoveryPointsByResourceError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListRecoveryPointsByResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::ListRecoveryPointsByResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListRecoveryPointsByResourcePaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListRecoveryPointsByResourcePaginator {
            crate::paginator::ListRecoveryPointsByResourcePaginator::new(self.handle, self.inner)
        }
        /// <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p> <note>
        /// <p>Amazon RDS requires a value of at least 20.</p>
        /// </note>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p> <note>
        /// <p>Amazon RDS requires a value of at least 20.</p>
        /// </note>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListReportJobs`.
    ///
    /// <p>Returns details about your report jobs.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListReportJobs {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_report_jobs_input::Builder,
    }
    impl ListReportJobs {
        /// Creates a new `ListReportJobs`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListReportJobs,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListReportJobsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListReportJobsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListReportJobsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListReportJobsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListReportJobsPaginator {
            crate::paginator::ListReportJobsPaginator::new(self.handle, self.inner)
        }
        /// <p>Returns only report jobs with the specified report plan name.</p>
        pub fn by_report_plan_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_report_plan_name(input.into());
            self
        }
        /// <p>Returns only report jobs with the specified report plan name.</p>
        pub fn set_by_report_plan_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_report_plan_name(input);
            self
        }
        /// <p>Returns only report jobs that were created before the date and time specified in Unix format and Coordinated Universal Time (UTC). For example, the value 1516925490 represents Friday, January 26, 2018 12:11:30 AM.</p>
        pub fn by_creation_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_creation_before(input);
            self
        }
        /// <p>Returns only report jobs that were created before the date and time specified in Unix format and Coordinated Universal Time (UTC). For example, the value 1516925490 represents Friday, January 26, 2018 12:11:30 AM.</p>
        pub fn set_by_creation_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_creation_before(input);
            self
        }
        /// <p>Returns only report jobs that were created after the date and time specified in Unix format and Coordinated Universal Time (UTC). For example, the value 1516925490 represents Friday, January 26, 2018 12:11:30 AM.</p>
        pub fn by_creation_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_creation_after(input);
            self
        }
        /// <p>Returns only report jobs that were created after the date and time specified in Unix format and Coordinated Universal Time (UTC). For example, the value 1516925490 represents Friday, January 26, 2018 12:11:30 AM.</p>
        pub fn set_by_creation_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_creation_after(input);
            self
        }
        /// <p>Returns only report jobs that are in the specified status. The statuses are:</p>
        /// <p> <code>CREATED | RUNNING | COMPLETED | FAILED</code> </p>
        pub fn by_status(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_status(input.into());
            self
        }
        /// <p>Returns only report jobs that are in the specified status. The statuses are:</p>
        /// <p> <code>CREATED | RUNNING | COMPLETED | FAILED</code> </p>
        pub fn set_by_status(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_by_status(input);
            self
        }
        /// <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListReportPlans`.
    ///
    /// <p>Returns a list of your report plans. For detailed information about a single report plan, use <code>DescribeReportPlan</code>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListReportPlans {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_report_plans_input::Builder,
    }
    impl ListReportPlans {
        /// Creates a new `ListReportPlans`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListReportPlans,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListReportPlansError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListReportPlansOutput,
            aws_smithy_http::result::SdkError<crate::error::ListReportPlansError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListReportPlansPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListReportPlansPaginator {
            crate::paginator::ListReportPlansPaginator::new(self.handle, self.inner)
        }
        /// <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The number of desired results from 1 to 1000. Optional. If unspecified, the query will return 1 MB of data.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>An identifier that was returned from the previous call to this operation, which can be used to return the next set of items in the list.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListRestoreJobs`.
    ///
    /// <p>Returns a list of jobs that Backup initiated to restore a saved resource, including details about the recovery process.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListRestoreJobs {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_restore_jobs_input::Builder,
    }
    impl ListRestoreJobs {
        /// Creates a new `ListRestoreJobs`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListRestoreJobs,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListRestoreJobsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListRestoreJobsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListRestoreJobsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListRestoreJobsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListRestoreJobsPaginator {
            crate::paginator::ListRestoreJobsPaginator::new(self.handle, self.inner)
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
        /// <p>The account ID to list the jobs from. Returns only restore jobs associated with the specified account ID.</p>
        pub fn by_account_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.by_account_id(input.into());
            self
        }
        /// <p>The account ID to list the jobs from. Returns only restore jobs associated with the specified account ID.</p>
        pub fn set_by_account_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_by_account_id(input);
            self
        }
        /// <p>Returns only restore jobs that were created before the specified date.</p>
        pub fn by_created_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_before(input);
            self
        }
        /// <p>Returns only restore jobs that were created before the specified date.</p>
        pub fn set_by_created_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_before(input);
            self
        }
        /// <p>Returns only restore jobs that were created after the specified date.</p>
        pub fn by_created_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_created_after(input);
            self
        }
        /// <p>Returns only restore jobs that were created after the specified date.</p>
        pub fn set_by_created_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_created_after(input);
            self
        }
        /// <p>Returns only restore jobs associated with the specified job status.</p>
        pub fn by_status(mut self, input: crate::model::RestoreJobStatus) -> Self {
            self.inner = self.inner.by_status(input);
            self
        }
        /// <p>Returns only restore jobs associated with the specified job status.</p>
        pub fn set_by_status(
            mut self,
            input: std::option::Option<crate::model::RestoreJobStatus>,
        ) -> Self {
            self.inner = self.inner.set_by_status(input);
            self
        }
        /// <p>Returns only copy jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn by_complete_before(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_complete_before(input);
            self
        }
        /// <p>Returns only copy jobs completed before a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn set_by_complete_before(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_complete_before(input);
            self
        }
        /// <p>Returns only copy jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn by_complete_after(mut self, input: aws_smithy_types::DateTime) -> Self {
            self.inner = self.inner.by_complete_after(input);
            self
        }
        /// <p>Returns only copy jobs completed after a date expressed in Unix format and Coordinated Universal Time (UTC).</p>
        pub fn set_by_complete_after(
            mut self,
            input: std::option::Option<aws_smithy_types::DateTime>,
        ) -> Self {
            self.inner = self.inner.set_by_complete_after(input);
            self
        }
    }
    /// Fluent builder constructing a request to `ListTags`.
    ///
    /// <p>Returns a list of key-value pairs assigned to a target recovery point, backup plan, or backup vault.</p>
    /// <p> <code>ListTags</code> only works for resource types that support full Backup management of their backups. Those resource types are listed in the "Full Backup management" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct ListTags {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::list_tags_input::Builder,
    }
    impl ListTags {
        /// Creates a new `ListTags`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::ListTags,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::ListTagsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::ListTagsOutput,
            aws_smithy_http::result::SdkError<crate::error::ListTagsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Create a paginator for this request
        ///
        /// Paginators are used by calling [`send().await`](crate::paginator::ListTagsPaginator::send) which returns a [`Stream`](tokio_stream::Stream).
        pub fn into_paginator(self) -> crate::paginator::ListTagsPaginator {
            crate::paginator::ListTagsPaginator::new(self.handle, self.inner)
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the type of resource. Valid targets for <code>ListTags</code> are recovery points, backup plans, and backup vaults.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the type of resource. Valid targets for <code>ListTags</code> are recovery points, backup plans, and backup vaults.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn next_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.next_token(input.into());
            self
        }
        /// <p>The next item following a partial list of returned items. For example, if a request is made to return <code>maxResults</code> number of items, <code>NextToken</code> allows you to return more items in your list starting at the location pointed to by the next token.</p>
        pub fn set_next_token(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_next_token(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn max_results(mut self, input: i32) -> Self {
            self.inner = self.inner.max_results(input);
            self
        }
        /// <p>The maximum number of items to be returned.</p>
        pub fn set_max_results(mut self, input: std::option::Option<i32>) -> Self {
            self.inner = self.inner.set_max_results(input);
            self
        }
    }
    /// Fluent builder constructing a request to `PutBackupVaultAccessPolicy`.
    ///
    /// <p>Sets a resource-based policy that is used to manage access permissions on the target backup vault. Requires a backup vault name and an access policy document in JSON format.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct PutBackupVaultAccessPolicy {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::put_backup_vault_access_policy_input::Builder,
    }
    impl PutBackupVaultAccessPolicy {
        /// Creates a new `PutBackupVaultAccessPolicy`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::PutBackupVaultAccessPolicy,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::PutBackupVaultAccessPolicyError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::PutBackupVaultAccessPolicyOutput,
            aws_smithy_http::result::SdkError<crate::error::PutBackupVaultAccessPolicyError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>The backup vault access policy document in JSON format.</p>
        pub fn policy(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.policy(input.into());
            self
        }
        /// <p>The backup vault access policy document in JSON format.</p>
        pub fn set_policy(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_policy(input);
            self
        }
    }
    /// Fluent builder constructing a request to `PutBackupVaultLockConfiguration`.
    ///
    /// <p>Applies Backup Vault Lock to a backup vault, preventing attempts to delete any recovery point stored in or created in a backup vault. Vault Lock also prevents attempts to update the lifecycle policy that controls the retention period of any recovery point currently stored in a backup vault. If specified, Vault Lock enforces a minimum and maximum retention period for future backup and copy jobs that target a backup vault.</p> <note>
    /// <p>Backup Vault Lock has yet to receive a third-party assessment for SEC 17a-4(f) and CFTC.</p>
    /// </note>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct PutBackupVaultLockConfiguration {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::put_backup_vault_lock_configuration_input::Builder,
    }
    impl PutBackupVaultLockConfiguration {
        /// Creates a new `PutBackupVaultLockConfiguration`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::PutBackupVaultLockConfiguration,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::PutBackupVaultLockConfigurationError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::PutBackupVaultLockConfigurationOutput,
            aws_smithy_http::result::SdkError<crate::error::PutBackupVaultLockConfigurationError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The Backup Vault Lock configuration that specifies the name of the backup vault it protects.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the name of the backup vault it protects.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the minimum retention period that the vault retains its recovery points. This setting can be useful if, for example, your organization's policies require you to retain certain data for at least seven years (2555 days).</p>
        /// <p>If this parameter is not specified, Vault Lock will not enforce a minimum retention period.</p>
        /// <p>If this parameter is specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or longer than the minimum retention period. If the job's retention period is shorter than that minimum retention period, then the vault fails that backup or copy job, and you should either modify your lifecycle settings or use a different vault. The shortest minimum retention period you can specify is 1 day. Recovery points already saved in the vault prior to Vault Lock are not affected.</p>
        pub fn min_retention_days(mut self, input: i64) -> Self {
            self.inner = self.inner.min_retention_days(input);
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the minimum retention period that the vault retains its recovery points. This setting can be useful if, for example, your organization's policies require you to retain certain data for at least seven years (2555 days).</p>
        /// <p>If this parameter is not specified, Vault Lock will not enforce a minimum retention period.</p>
        /// <p>If this parameter is specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or longer than the minimum retention period. If the job's retention period is shorter than that minimum retention period, then the vault fails that backup or copy job, and you should either modify your lifecycle settings or use a different vault. The shortest minimum retention period you can specify is 1 day. Recovery points already saved in the vault prior to Vault Lock are not affected.</p>
        pub fn set_min_retention_days(mut self, input: std::option::Option<i64>) -> Self {
            self.inner = self.inner.set_min_retention_days(input);
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the maximum retention period that the vault retains its recovery points. This setting can be useful if, for example, your organization's policies require you to destroy certain data after retaining it for four years (1460 days).</p>
        /// <p>If this parameter is not included, Vault Lock does not enforce a maximum retention period on the recovery points in the vault. If this parameter is included without a value, Vault Lock will not enforce a maximum retention period.</p>
        /// <p>If this parameter is specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or shorter than the maximum retention period. If the job's retention period is longer than that maximum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault. The longest maximum retention period you can specify is 36500 days (approximately 100 years). Recovery points already saved in the vault prior to Vault Lock are not affected.</p>
        pub fn max_retention_days(mut self, input: i64) -> Self {
            self.inner = self.inner.max_retention_days(input);
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the maximum retention period that the vault retains its recovery points. This setting can be useful if, for example, your organization's policies require you to destroy certain data after retaining it for four years (1460 days).</p>
        /// <p>If this parameter is not included, Vault Lock does not enforce a maximum retention period on the recovery points in the vault. If this parameter is included without a value, Vault Lock will not enforce a maximum retention period.</p>
        /// <p>If this parameter is specified, any backup or copy job to the vault must have a lifecycle policy with a retention period equal to or shorter than the maximum retention period. If the job's retention period is longer than that maximum retention period, then the vault fails the backup or copy job, and you should either modify your lifecycle settings or use a different vault. The longest maximum retention period you can specify is 36500 days (approximately 100 years). Recovery points already saved in the vault prior to Vault Lock are not affected.</p>
        pub fn set_max_retention_days(mut self, input: std::option::Option<i64>) -> Self {
            self.inner = self.inner.set_max_retention_days(input);
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the number of days before the lock date. For example, setting <code>ChangeableForDays</code> to 30 on Jan. 1, 2022 at 8pm UTC will set the lock date to Jan. 31, 2022 at 8pm UTC.</p>
        /// <p>Backup enforces a 72-hour cooling-off period before Vault Lock takes effect and becomes immutable. Therefore, you must set <code>ChangeableForDays</code> to 3 or greater.</p>
        /// <p>Before the lock date, you can delete Vault Lock from the vault using <code>DeleteBackupVaultLockConfiguration</code> or change the Vault Lock configuration using <code>PutBackupVaultLockConfiguration</code>. On and after the lock date, the Vault Lock becomes immutable and cannot be changed or deleted.</p>
        /// <p>If this parameter is not specified, you can delete Vault Lock from the vault using <code>DeleteBackupVaultLockConfiguration</code> or change the Vault Lock configuration using <code>PutBackupVaultLockConfiguration</code> at any time.</p>
        pub fn changeable_for_days(mut self, input: i64) -> Self {
            self.inner = self.inner.changeable_for_days(input);
            self
        }
        /// <p>The Backup Vault Lock configuration that specifies the number of days before the lock date. For example, setting <code>ChangeableForDays</code> to 30 on Jan. 1, 2022 at 8pm UTC will set the lock date to Jan. 31, 2022 at 8pm UTC.</p>
        /// <p>Backup enforces a 72-hour cooling-off period before Vault Lock takes effect and becomes immutable. Therefore, you must set <code>ChangeableForDays</code> to 3 or greater.</p>
        /// <p>Before the lock date, you can delete Vault Lock from the vault using <code>DeleteBackupVaultLockConfiguration</code> or change the Vault Lock configuration using <code>PutBackupVaultLockConfiguration</code>. On and after the lock date, the Vault Lock becomes immutable and cannot be changed or deleted.</p>
        /// <p>If this parameter is not specified, you can delete Vault Lock from the vault using <code>DeleteBackupVaultLockConfiguration</code> or change the Vault Lock configuration using <code>PutBackupVaultLockConfiguration</code> at any time.</p>
        pub fn set_changeable_for_days(mut self, input: std::option::Option<i64>) -> Self {
            self.inner = self.inner.set_changeable_for_days(input);
            self
        }
    }
    /// Fluent builder constructing a request to `PutBackupVaultNotifications`.
    ///
    /// <p>Turns on notifications on a backup vault for the specified topic and events.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct PutBackupVaultNotifications {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::put_backup_vault_notifications_input::Builder,
    }
    impl PutBackupVaultNotifications {
        /// Creates a new `PutBackupVaultNotifications`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::PutBackupVaultNotifications,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::PutBackupVaultNotificationsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::PutBackupVaultNotificationsOutput,
            aws_smithy_http::result::SdkError<crate::error::PutBackupVaultNotificationsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>The Amazon Resource Name (ARN) that specifies the topic for a backup vault’s events; for example, <code>arn:aws:sns:us-west-2:111122223333:MyVaultTopic</code>.</p>
        pub fn sns_topic_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.sns_topic_arn(input.into());
            self
        }
        /// <p>The Amazon Resource Name (ARN) that specifies the topic for a backup vault’s events; for example, <code>arn:aws:sns:us-west-2:111122223333:MyVaultTopic</code>.</p>
        pub fn set_sns_topic_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_sns_topic_arn(input);
            self
        }
        /// Appends an item to `BackupVaultEvents`.
        ///
        /// To override the contents of this collection use [`set_backup_vault_events`](Self::set_backup_vault_events).
        ///
        /// <p>An array of events that indicate the status of jobs to back up resources to the backup vault.</p>
        /// <p>For common use cases and code samples, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/sns-notifications.html">Using Amazon SNS to track Backup events</a>.</p>
        /// <p>The following events are supported:</p>
        /// <ul>
        /// <li> <p> <code>BACKUP_JOB_STARTED</code> | <code>BACKUP_JOB_COMPLETED</code> </p> </li>
        /// <li> <p> <code>COPY_JOB_STARTED</code> | <code>COPY_JOB_SUCCESSFUL</code> | <code>COPY_JOB_FAILED</code> </p> </li>
        /// <li> <p> <code>RESTORE_JOB_STARTED</code> | <code>RESTORE_JOB_COMPLETED</code> | <code>RECOVERY_POINT_MODIFIED</code> </p> </li>
        /// <li> <p> <code>S3_BACKUP_OBJECT_FAILED</code> | <code>S3_RESTORE_OBJECT_FAILED</code> </p> </li>
        /// </ul> <note>
        /// <p>Ignore the list below because it includes deprecated events. Refer to the list above.</p>
        /// </note>
        pub fn backup_vault_events(mut self, input: crate::model::BackupVaultEvent) -> Self {
            self.inner = self.inner.backup_vault_events(input);
            self
        }
        /// <p>An array of events that indicate the status of jobs to back up resources to the backup vault.</p>
        /// <p>For common use cases and code samples, see <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/sns-notifications.html">Using Amazon SNS to track Backup events</a>.</p>
        /// <p>The following events are supported:</p>
        /// <ul>
        /// <li> <p> <code>BACKUP_JOB_STARTED</code> | <code>BACKUP_JOB_COMPLETED</code> </p> </li>
        /// <li> <p> <code>COPY_JOB_STARTED</code> | <code>COPY_JOB_SUCCESSFUL</code> | <code>COPY_JOB_FAILED</code> </p> </li>
        /// <li> <p> <code>RESTORE_JOB_STARTED</code> | <code>RESTORE_JOB_COMPLETED</code> | <code>RECOVERY_POINT_MODIFIED</code> </p> </li>
        /// <li> <p> <code>S3_BACKUP_OBJECT_FAILED</code> | <code>S3_RESTORE_OBJECT_FAILED</code> </p> </li>
        /// </ul> <note>
        /// <p>Ignore the list below because it includes deprecated events. Refer to the list above.</p>
        /// </note>
        pub fn set_backup_vault_events(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::BackupVaultEvent>>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_events(input);
            self
        }
    }
    /// Fluent builder constructing a request to `StartBackupJob`.
    ///
    /// <p>Starts an on-demand backup job for the specified resource.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct StartBackupJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::start_backup_job_input::Builder,
    }
    impl StartBackupJob {
        /// Creates a new `StartBackupJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::StartBackupJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::StartBackupJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::StartBackupJobOutput,
            aws_smithy_http::result::SdkError<crate::error::StartBackupJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a resource. The format of the ARN depends on the resource type.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
        pub fn iam_role_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.iam_role_arn(input.into());
            self
        }
        /// <p>Specifies the IAM role ARN used to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
        pub fn set_iam_role_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_iam_role_arn(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartBackupJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartBackupJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
        /// <p>A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours.</p>
        pub fn start_window_minutes(mut self, input: i64) -> Self {
            self.inner = self.inner.start_window_minutes(input);
            self
        }
        /// <p>A value in minutes after a backup is scheduled before a job will be canceled if it doesn't start successfully. This value is optional, and the default is 8 hours.</p>
        pub fn set_start_window_minutes(mut self, input: std::option::Option<i64>) -> Self {
            self.inner = self.inner.set_start_window_minutes(input);
            self
        }
        /// <p>A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for <code>StartWindowMinutes</code>, or if the backup started later than scheduled.</p>
        pub fn complete_window_minutes(mut self, input: i64) -> Self {
            self.inner = self.inner.complete_window_minutes(input);
            self
        }
        /// <p>A value in minutes during which a successfully started backup must complete, or else Backup will cancel the job. This value is optional. This value begins counting down from when the backup was scheduled. It does not add additional time for <code>StartWindowMinutes</code>, or if the backup started later than scheduled.</p>
        pub fn set_complete_window_minutes(mut self, input: std::option::Option<i64>) -> Self {
            self.inner = self.inner.set_complete_window_minutes(input);
            self
        }
        /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define. </p>
        /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>
        /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
        pub fn lifecycle(mut self, input: crate::model::Lifecycle) -> Self {
            self.inner = self.inner.lifecycle(input);
            self
        }
        /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup will transition and expire backups automatically according to the lifecycle that you define. </p>
        /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>
        /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
        pub fn set_lifecycle(
            mut self,
            input: std::option::Option<crate::model::Lifecycle>,
        ) -> Self {
            self.inner = self.inner.set_lifecycle(input);
            self
        }
        /// Adds a key-value pair to `RecoveryPointTags`.
        ///
        /// To override the contents of this collection use [`set_recovery_point_tags`](Self::set_recovery_point_tags).
        ///
        /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair.</p>
        pub fn recovery_point_tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.recovery_point_tags(k.into(), v.into());
            self
        }
        /// <p>To help organize your resources, you can assign your own metadata to the resources that you create. Each tag is a key-value pair.</p>
        pub fn set_recovery_point_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_tags(input);
            self
        }
        /// Adds a key-value pair to `BackupOptions`.
        ///
        /// To override the contents of this collection use [`set_backup_options`](Self::set_backup_options).
        ///
        /// <p>Specifies the backup option for a selected resource. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>
        /// <p>Valid values: Set to <code>"WindowsVSS":"enabled"</code> to enable the <code>WindowsVSS</code> backup option and create a Windows VSS backup. Set to <code>"WindowsVSS""disabled"</code> to create a regular backup. The <code>WindowsVSS</code> option is not enabled by default.</p>
        pub fn backup_options(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.backup_options(k.into(), v.into());
            self
        }
        /// <p>Specifies the backup option for a selected resource. This option is only available for Windows Volume Shadow Copy Service (VSS) backup jobs.</p>
        /// <p>Valid values: Set to <code>"WindowsVSS":"enabled"</code> to enable the <code>WindowsVSS</code> backup option and create a Windows VSS backup. Set to <code>"WindowsVSS""disabled"</code> to create a regular backup. The <code>WindowsVSS</code> option is not enabled by default.</p>
        pub fn set_backup_options(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_backup_options(input);
            self
        }
    }
    /// Fluent builder constructing a request to `StartCopyJob`.
    ///
    /// <p>Starts a job to create a one-time copy of the specified resource.</p>
    /// <p>Does not support continuous backups.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct StartCopyJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::start_copy_job_input::Builder,
    }
    impl StartCopyJob {
        /// Creates a new `StartCopyJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::StartCopyJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::StartCopyJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::StartCopyJobOutput,
            aws_smithy_http::result::SdkError<crate::error::StartCopyJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>An ARN that uniquely identifies a recovery point to use for the copy job; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45. </p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An ARN that uniquely identifies a recovery point to use for the copy job; for example, arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45. </p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
        /// <p>The name of a logical source container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn source_backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.source_backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical source container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_source_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_source_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a destination backup vault to copy to; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
        pub fn destination_backup_vault_arn(
            mut self,
            input: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.destination_backup_vault_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a destination backup vault to copy to; for example, <code>arn:aws:backup:us-east-1:123456789012:vault:aBackupVault</code>.</p>
        pub fn set_destination_backup_vault_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_destination_backup_vault_arn(input);
            self
        }
        /// <p>Specifies the IAM role ARN used to copy the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
        pub fn iam_role_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.iam_role_arn(input.into());
            self
        }
        /// <p>Specifies the IAM role ARN used to copy the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
        pub fn set_iam_role_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_iam_role_arn(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartCopyJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartCopyJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
        /// <p>Contains an array of <code>Transition</code> objects specifying how long in days before a recovery point transitions to cold storage or is deleted.</p>
        /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, on the console, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>
        /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
        pub fn lifecycle(mut self, input: crate::model::Lifecycle) -> Self {
            self.inner = self.inner.lifecycle(input);
            self
        }
        /// <p>Contains an array of <code>Transition</code> objects specifying how long in days before a recovery point transitions to cold storage or is deleted.</p>
        /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, on the console, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>
        /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
        pub fn set_lifecycle(
            mut self,
            input: std::option::Option<crate::model::Lifecycle>,
        ) -> Self {
            self.inner = self.inner.set_lifecycle(input);
            self
        }
    }
    /// Fluent builder constructing a request to `StartReportJob`.
    ///
    /// <p>Starts an on-demand report job for the specified report plan.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct StartReportJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::start_report_job_input::Builder,
    }
    impl StartReportJob {
        /// Creates a new `StartReportJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::StartReportJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::StartReportJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::StartReportJobOutput,
            aws_smithy_http::result::SdkError<crate::error::StartReportJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of a report plan.</p>
        pub fn report_plan_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_name(input.into());
            self
        }
        /// <p>The unique name of a report plan.</p>
        pub fn set_report_plan_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_name(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartReportJobInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartReportJobInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `StartRestoreJob`.
    ///
    /// <p>Recovers the saved resource identified by an Amazon Resource Name (ARN).</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct StartRestoreJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::start_restore_job_input::Builder,
    }
    impl StartRestoreJob {
        /// Creates a new `StartRestoreJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::StartRestoreJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::StartRestoreJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::StartRestoreJobOutput,
            aws_smithy_http::result::SdkError<crate::error::StartRestoreJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An ARN that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
        /// Adds a key-value pair to `Metadata`.
        ///
        /// To override the contents of this collection use [`set_metadata`](Self::set_metadata).
        ///
        /// <p>A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.</p>
        /// <p> You can get configuration metadata about a resource at the time it was backed up by calling <code>GetRecoveryPointRestoreMetadata</code>. However, values in addition to those provided by <code>GetRecoveryPointRestoreMetadata</code> might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.</p>
        /// <p>You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:</p>
        /// <ul>
        /// <li> <p> <code>file-system-id</code>: The ID of the Amazon EFS file system that is backed up by Backup. Returned in <code>GetRecoveryPointRestoreMetadata</code>.</p> </li>
        /// <li> <p> <code>Encrypted</code>: A Boolean value that, if true, specifies that the file system is encrypted. If <code>KmsKeyId</code> is specified, <code>Encrypted</code> must be set to <code>true</code>.</p> </li>
        /// <li> <p> <code>KmsKeyId</code>: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.</p> </li>
        /// <li> <p> <code>PerformanceMode</code>: Specifies the throughput mode of the file system.</p> </li>
        /// <li> <p> <code>CreationToken</code>: A user-supplied value that ensures the uniqueness (idempotency) of the request.</p> </li>
        /// <li> <p> <code>newFileSystem</code>: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.</p> </li>
        /// <li> <p> <code>ItemsToRestore</code>: An array of one to five strings where each string is a file path. Use <code>ItemsToRestore</code> to restore specific files or directories rather than the entire file system. This parameter is optional. For example, <code>"itemsToRestore":"[\"/my.test\"]"</code>.</p> </li>
        /// </ul>
        pub fn metadata(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.metadata(k.into(), v.into());
            self
        }
        /// <p>A set of metadata key-value pairs. Contains information, such as a resource name, required to restore a recovery point.</p>
        /// <p> You can get configuration metadata about a resource at the time it was backed up by calling <code>GetRecoveryPointRestoreMetadata</code>. However, values in addition to those provided by <code>GetRecoveryPointRestoreMetadata</code> might be required to restore a resource. For example, you might need to provide a new resource name if the original already exists.</p>
        /// <p>You need to specify specific metadata to restore an Amazon Elastic File System (Amazon EFS) instance:</p>
        /// <ul>
        /// <li> <p> <code>file-system-id</code>: The ID of the Amazon EFS file system that is backed up by Backup. Returned in <code>GetRecoveryPointRestoreMetadata</code>.</p> </li>
        /// <li> <p> <code>Encrypted</code>: A Boolean value that, if true, specifies that the file system is encrypted. If <code>KmsKeyId</code> is specified, <code>Encrypted</code> must be set to <code>true</code>.</p> </li>
        /// <li> <p> <code>KmsKeyId</code>: Specifies the Amazon Web Services KMS key that is used to encrypt the restored file system. You can specify a key from another Amazon Web Services account provided that key it is properly shared with your account via Amazon Web Services KMS.</p> </li>
        /// <li> <p> <code>PerformanceMode</code>: Specifies the throughput mode of the file system.</p> </li>
        /// <li> <p> <code>CreationToken</code>: A user-supplied value that ensures the uniqueness (idempotency) of the request.</p> </li>
        /// <li> <p> <code>newFileSystem</code>: A Boolean value that, if true, specifies that the recovery point is restored to a new Amazon EFS file system.</p> </li>
        /// <li> <p> <code>ItemsToRestore</code>: An array of one to five strings where each string is a file path. Use <code>ItemsToRestore</code> to restore specific files or directories rather than the entire file system. This parameter is optional. For example, <code>"itemsToRestore":"[\"/my.test\"]"</code>.</p> </li>
        /// </ul>
        pub fn set_metadata(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_metadata(input);
            self
        }
        /// <p>The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
        pub fn iam_role_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.iam_role_arn(input.into());
            self
        }
        /// <p>The Amazon Resource Name (ARN) of the IAM role that Backup uses to create the target recovery point; for example, <code>arn:aws:iam::123456789012:role/S3Access</code>.</p>
        pub fn set_iam_role_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_iam_role_arn(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartRestoreJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>StartRestoreJob</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
        /// <p>Starts a job to restore a recovery point for one of the following resources:</p>
        /// <ul>
        /// <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>
        /// <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>
        /// <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>
        /// <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>
        /// <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>
        /// <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>
        /// <li> <p> <code>FSx</code> for Amazon FSx</p> </li>
        /// <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>
        /// <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>
        /// <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>
        /// <li> <p> <code>S3</code> for Amazon S3</p> </li>
        /// <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>
        /// </ul>
        pub fn resource_type(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_type(input.into());
            self
        }
        /// <p>Starts a job to restore a recovery point for one of the following resources:</p>
        /// <ul>
        /// <li> <p> <code>Aurora</code> for Amazon Aurora</p> </li>
        /// <li> <p> <code>DocumentDB</code> for Amazon DocumentDB (with MongoDB compatibility)</p> </li>
        /// <li> <p> <code>DynamoDB</code> for Amazon DynamoDB</p> </li>
        /// <li> <p> <code>EBS</code> for Amazon Elastic Block Store</p> </li>
        /// <li> <p> <code>EC2</code> for Amazon Elastic Compute Cloud</p> </li>
        /// <li> <p> <code>EFS</code> for Amazon Elastic File System</p> </li>
        /// <li> <p> <code>FSx</code> for Amazon FSx</p> </li>
        /// <li> <p> <code>Neptune</code> for Amazon Neptune</p> </li>
        /// <li> <p> <code>RDS</code> for Amazon Relational Database Service</p> </li>
        /// <li> <p> <code>Storage Gateway</code> for Storage Gateway</p> </li>
        /// <li> <p> <code>S3</code> for Amazon S3</p> </li>
        /// <li> <p> <code>VirtualMachine</code> for virtual machines</p> </li>
        /// </ul>
        pub fn set_resource_type(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_resource_type(input);
            self
        }
    }
    /// Fluent builder constructing a request to `StopBackupJob`.
    ///
    /// <p>Attempts to cancel a job to create a one-time backup of a resource.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct StopBackupJob {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::stop_backup_job_input::Builder,
    }
    impl StopBackupJob {
        /// Creates a new `StopBackupJob`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::StopBackupJob,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::StopBackupJobError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::StopBackupJobOutput,
            aws_smithy_http::result::SdkError<crate::error::StopBackupJobError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a request to Backup to back up a resource.</p>
        pub fn backup_job_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_job_id(input.into());
            self
        }
        /// <p>Uniquely identifies a request to Backup to back up a resource.</p>
        pub fn set_backup_job_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_job_id(input);
            self
        }
    }
    /// Fluent builder constructing a request to `TagResource`.
    ///
    /// <p>Assigns a set of key-value pairs to a recovery point, backup plan, or backup vault identified by an Amazon Resource Name (ARN).</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct TagResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::tag_resource_input::Builder,
    }
    impl TagResource {
        /// Creates a new `TagResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::TagResource,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::TagResourceError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::TagResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::TagResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the type of the tagged resource.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the type of the tagged resource.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// Adds a key-value pair to `Tags`.
        ///
        /// To override the contents of this collection use [`set_tags`](Self::set_tags).
        ///
        /// <p>Key-value pairs that are used to help organize your resources. You can assign your own metadata to the resources you create. For clarity, this is the structure to assign tags: <code>[{"Key":"string","Value":"string"}]</code>.</p>
        pub fn tags(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.tags(k.into(), v.into());
            self
        }
        /// <p>Key-value pairs that are used to help organize your resources. You can assign your own metadata to the resources you create. For clarity, this is the structure to assign tags: <code>[{"Key":"string","Value":"string"}]</code>.</p>
        pub fn set_tags(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_tags(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UntagResource`.
    ///
    /// <p>Removes a set of key-value pairs from a recovery point, backup plan, or backup vault identified by an Amazon Resource Name (ARN)</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UntagResource {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::untag_resource_input::Builder,
    }
    impl UntagResource {
        /// Creates a new `UntagResource`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UntagResource,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UntagResourceError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UntagResourceOutput,
            aws_smithy_http::result::SdkError<crate::error::UntagResourceError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the type of the tagged resource.</p>
        pub fn resource_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.resource_arn(input.into());
            self
        }
        /// <p>An ARN that uniquely identifies a resource. The format of the ARN depends on the type of the tagged resource.</p>
        pub fn set_resource_arn(mut self, input: std::option::Option<std::string::String>) -> Self {
            self.inner = self.inner.set_resource_arn(input);
            self
        }
        /// Appends an item to `TagKeyList`.
        ///
        /// To override the contents of this collection use [`set_tag_key_list`](Self::set_tag_key_list).
        ///
        /// <p>A list of keys to identify which key-value tags to remove from a resource.</p>
        pub fn tag_key_list(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.tag_key_list(input.into());
            self
        }
        /// <p>A list of keys to identify which key-value tags to remove from a resource.</p>
        pub fn set_tag_key_list(
            mut self,
            input: std::option::Option<std::vec::Vec<std::string::String>>,
        ) -> Self {
            self.inner = self.inner.set_tag_key_list(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateBackupPlan`.
    ///
    /// <p>Updates an existing backup plan identified by its <code>backupPlanId</code> with the input document in JSON format. The new version is uniquely identified by a <code>VersionId</code>.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateBackupPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_backup_plan_input::Builder,
    }
    impl UpdateBackupPlan {
        /// Creates a new `UpdateBackupPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UpdateBackupPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateBackupPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateBackupPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateBackupPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn backup_plan_id(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_plan_id(input.into());
            self
        }
        /// <p>Uniquely identifies a backup plan.</p>
        pub fn set_backup_plan_id(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan_id(input);
            self
        }
        /// <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
        pub fn backup_plan(mut self, input: crate::model::BackupPlanInput) -> Self {
            self.inner = self.inner.backup_plan(input);
            self
        }
        /// <p>Specifies the body of a backup plan. Includes a <code>BackupPlanName</code> and one or more sets of <code>Rules</code>.</p>
        pub fn set_backup_plan(
            mut self,
            input: std::option::Option<crate::model::BackupPlanInput>,
        ) -> Self {
            self.inner = self.inner.set_backup_plan(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateFramework`.
    ///
    /// <p>Updates an existing framework identified by its <code>FrameworkName</code> with the input document in JSON format.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateFramework {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_framework_input::Builder,
    }
    impl UpdateFramework {
        /// Creates a new `UpdateFramework`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UpdateFramework,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateFrameworkError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateFrameworkOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateFrameworkError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of a framework. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn framework_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.framework_name(input.into());
            self
        }
        /// <p>The unique name of a framework. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn set_framework_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_framework_name(input);
            self
        }
        /// <p>An optional description of the framework with a maximum 1,024 characters.</p>
        pub fn framework_description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.framework_description(input.into());
            self
        }
        /// <p>An optional description of the framework with a maximum 1,024 characters.</p>
        pub fn set_framework_description(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_framework_description(input);
            self
        }
        /// Appends an item to `FrameworkControls`.
        ///
        /// To override the contents of this collection use [`set_framework_controls`](Self::set_framework_controls).
        ///
        /// <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
        pub fn framework_controls(mut self, input: crate::model::FrameworkControl) -> Self {
            self.inner = self.inner.framework_controls(input);
            self
        }
        /// <p>A list of the controls that make up the framework. Each control in the list has a name, input parameters, and scope.</p>
        pub fn set_framework_controls(
            mut self,
            input: std::option::Option<std::vec::Vec<crate::model::FrameworkControl>>,
        ) -> Self {
            self.inner = self.inner.set_framework_controls(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>UpdateFrameworkInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>UpdateFrameworkInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateGlobalSettings`.
    ///
    /// <p>Updates whether the Amazon Web Services account is opted in to cross-account backup. Returns an error if the account is not an Organizations management account. Use the <code>DescribeGlobalSettings</code> API to determine the current settings.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateGlobalSettings {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_global_settings_input::Builder,
    }
    impl UpdateGlobalSettings {
        /// Creates a new `UpdateGlobalSettings`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UpdateGlobalSettings,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateGlobalSettingsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateGlobalSettingsOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateGlobalSettingsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Adds a key-value pair to `GlobalSettings`.
        ///
        /// To override the contents of this collection use [`set_global_settings`](Self::set_global_settings).
        ///
        /// <p>A value for <code>isCrossAccountBackupEnabled</code> and a Region. Example: <code>update-global-settings --global-settings isCrossAccountBackupEnabled=false --region us-west-2</code>.</p>
        pub fn global_settings(
            mut self,
            k: impl Into<std::string::String>,
            v: impl Into<std::string::String>,
        ) -> Self {
            self.inner = self.inner.global_settings(k.into(), v.into());
            self
        }
        /// <p>A value for <code>isCrossAccountBackupEnabled</code> and a Region. Example: <code>update-global-settings --global-settings isCrossAccountBackupEnabled=false --region us-west-2</code>.</p>
        pub fn set_global_settings(
            mut self,
            input: std::option::Option<
                std::collections::HashMap<std::string::String, std::string::String>,
            >,
        ) -> Self {
            self.inner = self.inner.set_global_settings(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateRecoveryPointLifecycle`.
    ///
    /// <p>Sets the transition lifecycle of a recovery point.</p>
    /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup transitions and expires backups automatically according to the lifecycle that you define.</p>
    /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold.</p>
    /// <p>Resource types that are able to be transitioned to cold storage are listed in the "Lifecycle to cold storage" section of the <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/whatisbackup.html#features-by-resource"> Feature availability by resource</a> table. Backup ignores this expression for other resource types.</p>
    /// <p>This operation does not support continuous backups.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateRecoveryPointLifecycle {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_recovery_point_lifecycle_input::Builder,
    }
    impl UpdateRecoveryPointLifecycle {
        /// Creates a new `UpdateRecoveryPointLifecycle`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UpdateRecoveryPointLifecycle,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateRecoveryPointLifecycleError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateRecoveryPointLifecycleOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateRecoveryPointLifecycleError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn backup_vault_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.backup_vault_name(input.into());
            self
        }
        /// <p>The name of a logical container where backups are stored. Backup vaults are identified by names that are unique to the account used to create them and the Amazon Web Services Region where they are created. They consist of lowercase letters, numbers, and hyphens.</p>
        pub fn set_backup_vault_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_backup_vault_name(input);
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn recovery_point_arn(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.recovery_point_arn(input.into());
            self
        }
        /// <p>An Amazon Resource Name (ARN) that uniquely identifies a recovery point; for example, <code>arn:aws:backup:us-east-1:123456789012:recovery-point:1EB3B5E7-9EB0-435A-A80B-108B488B0D45</code>.</p>
        pub fn set_recovery_point_arn(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_recovery_point_arn(input);
            self
        }
        /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup transitions and expires backups automatically according to the lifecycle that you define. </p>
        /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>
        pub fn lifecycle(mut self, input: crate::model::Lifecycle) -> Self {
            self.inner = self.inner.lifecycle(input);
            self
        }
        /// <p>The lifecycle defines when a protected resource is transitioned to cold storage and when it expires. Backup transitions and expires backups automatically according to the lifecycle that you define. </p>
        /// <p>Backups transitioned to cold storage must be stored in cold storage for a minimum of 90 days. Therefore, the “retention” setting must be 90 days greater than the “transition to cold after days” setting. The “transition to cold after days” setting cannot be changed after a backup has been transitioned to cold. </p>
        pub fn set_lifecycle(
            mut self,
            input: std::option::Option<crate::model::Lifecycle>,
        ) -> Self {
            self.inner = self.inner.set_lifecycle(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateRegionSettings`.
    ///
    /// <p>Updates the current service opt-in settings for the Region. If service-opt-in is enabled for a service, Backup tries to protect that service's resources in this Region, when the resource is included in an on-demand backup or scheduled backup plan. Otherwise, Backup does not try to protect that service's resources in this Region. Use the <code>DescribeRegionSettings</code> API to determine the resource types that are supported.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateRegionSettings {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_region_settings_input::Builder,
    }
    impl UpdateRegionSettings {
        /// Creates a new `UpdateRegionSettings`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UpdateRegionSettings,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateRegionSettingsError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateRegionSettingsOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateRegionSettingsError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// Adds a key-value pair to `ResourceTypeOptInPreference`.
        ///
        /// To override the contents of this collection use [`set_resource_type_opt_in_preference`](Self::set_resource_type_opt_in_preference).
        ///
        /// <p>Updates the list of services along with the opt-in preferences for the Region.</p>
        pub fn resource_type_opt_in_preference(
            mut self,
            k: impl Into<std::string::String>,
            v: bool,
        ) -> Self {
            self.inner = self.inner.resource_type_opt_in_preference(k.into(), v);
            self
        }
        /// <p>Updates the list of services along with the opt-in preferences for the Region.</p>
        pub fn set_resource_type_opt_in_preference(
            mut self,
            input: std::option::Option<std::collections::HashMap<std::string::String, bool>>,
        ) -> Self {
            self.inner = self.inner.set_resource_type_opt_in_preference(input);
            self
        }
        /// Adds a key-value pair to `ResourceTypeManagementPreference`.
        ///
        /// To override the contents of this collection use [`set_resource_type_management_preference`](Self::set_resource_type_management_preference).
        ///
        /// <p>Enables or disables full Backup management of backups for a resource type. To enable full Backup management for DynamoDB along with <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html"> Backup's advanced DynamoDB backup features</a>, follow the procedure to <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html#advanced-ddb-backup-enable-cli"> enable advanced DynamoDB backup programmatically</a>.</p>
        pub fn resource_type_management_preference(
            mut self,
            k: impl Into<std::string::String>,
            v: bool,
        ) -> Self {
            self.inner = self.inner.resource_type_management_preference(k.into(), v);
            self
        }
        /// <p>Enables or disables full Backup management of backups for a resource type. To enable full Backup management for DynamoDB along with <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html"> Backup's advanced DynamoDB backup features</a>, follow the procedure to <a href="https://docs.aws.amazon.com/aws-backup/latest/devguide/advanced-ddb-backup.html#advanced-ddb-backup-enable-cli"> enable advanced DynamoDB backup programmatically</a>.</p>
        pub fn set_resource_type_management_preference(
            mut self,
            input: std::option::Option<std::collections::HashMap<std::string::String, bool>>,
        ) -> Self {
            self.inner = self.inner.set_resource_type_management_preference(input);
            self
        }
    }
    /// Fluent builder constructing a request to `UpdateReportPlan`.
    ///
    /// <p>Updates an existing report plan identified by its <code>ReportPlanName</code> with the input document in JSON format.</p>
    #[derive(std::clone::Clone, std::fmt::Debug)]
    pub struct UpdateReportPlan {
        handle: std::sync::Arc<super::Handle>,
        inner: crate::input::update_report_plan_input::Builder,
    }
    impl UpdateReportPlan {
        /// Creates a new `UpdateReportPlan`.
        pub(crate) fn new(handle: std::sync::Arc<super::Handle>) -> Self {
            Self {
                handle,
                inner: Default::default(),
            }
        }

        /// Consume this builder, creating a customizable operation that can be modified before being
        /// sent. The operation's inner [http::Request] can be modified as well.
        pub async fn customize(
            self,
        ) -> std::result::Result<
            crate::customizable_operation::CustomizableOperation<
                crate::operation::UpdateReportPlan,
                aws_http::retry::AwsResponseRetryClassifier,
            >,
            aws_smithy_http::result::SdkError<crate::error::UpdateReportPlanError>,
        > {
            let handle = self.handle.clone();
            let operation = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            Ok(crate::customizable_operation::CustomizableOperation { handle, operation })
        }

        /// Sends the request and returns the response.
        ///
        /// If an error occurs, an `SdkError` will be returned with additional details that
        /// can be matched against.
        ///
        /// By default, any retryable failures will be retried twice. Retry behavior
        /// is configurable with the [RetryConfig](aws_smithy_types::retry::RetryConfig), which can be
        /// set when configuring the client.
        pub async fn send(
            self,
        ) -> std::result::Result<
            crate::output::UpdateReportPlanOutput,
            aws_smithy_http::result::SdkError<crate::error::UpdateReportPlanError>,
        > {
            let op = self
                .inner
                .build()
                .map_err(|err| aws_smithy_http::result::SdkError::ConstructionFailure(err.into()))?
                .make_operation(&self.handle.conf)
                .await
                .map_err(|err| {
                    aws_smithy_http::result::SdkError::ConstructionFailure(err.into())
                })?;
            self.handle.client.call(op).await
        }
        /// <p>The unique name of the report plan. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn report_plan_name(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_name(input.into());
            self
        }
        /// <p>The unique name of the report plan. This name is between 1 and 256 characters, starting with a letter, and consisting of letters (a-z, A-Z), numbers (0-9), and underscores (_).</p>
        pub fn set_report_plan_name(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_name(input);
            self
        }
        /// <p>An optional description of the report plan with a maximum 1,024 characters.</p>
        pub fn report_plan_description(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.report_plan_description(input.into());
            self
        }
        /// <p>An optional description of the report plan with a maximum 1,024 characters.</p>
        pub fn set_report_plan_description(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_report_plan_description(input);
            self
        }
        /// <p>A structure that contains information about where to deliver your reports, specifically your Amazon S3 bucket name, S3 key prefix, and the formats of your reports.</p>
        pub fn report_delivery_channel(
            mut self,
            input: crate::model::ReportDeliveryChannel,
        ) -> Self {
            self.inner = self.inner.report_delivery_channel(input);
            self
        }
        /// <p>A structure that contains information about where to deliver your reports, specifically your Amazon S3 bucket name, S3 key prefix, and the formats of your reports.</p>
        pub fn set_report_delivery_channel(
            mut self,
            input: std::option::Option<crate::model::ReportDeliveryChannel>,
        ) -> Self {
            self.inner = self.inner.set_report_delivery_channel(input);
            self
        }
        /// <p>Identifies the report template for the report. Reports are built using a report template. The report templates are:</p>
        /// <p> <code>RESOURCE_COMPLIANCE_REPORT | CONTROL_COMPLIANCE_REPORT | BACKUP_JOB_REPORT | COPY_JOB_REPORT | RESTORE_JOB_REPORT</code> </p>
        /// <p>If the report template is <code>RESOURCE_COMPLIANCE_REPORT</code> or <code>CONTROL_COMPLIANCE_REPORT</code>, this API resource also describes the report coverage by Amazon Web Services Regions and frameworks.</p>
        pub fn report_setting(mut self, input: crate::model::ReportSetting) -> Self {
            self.inner = self.inner.report_setting(input);
            self
        }
        /// <p>Identifies the report template for the report. Reports are built using a report template. The report templates are:</p>
        /// <p> <code>RESOURCE_COMPLIANCE_REPORT | CONTROL_COMPLIANCE_REPORT | BACKUP_JOB_REPORT | COPY_JOB_REPORT | RESTORE_JOB_REPORT</code> </p>
        /// <p>If the report template is <code>RESOURCE_COMPLIANCE_REPORT</code> or <code>CONTROL_COMPLIANCE_REPORT</code>, this API resource also describes the report coverage by Amazon Web Services Regions and frameworks.</p>
        pub fn set_report_setting(
            mut self,
            input: std::option::Option<crate::model::ReportSetting>,
        ) -> Self {
            self.inner = self.inner.set_report_setting(input);
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>UpdateReportPlanInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn idempotency_token(mut self, input: impl Into<std::string::String>) -> Self {
            self.inner = self.inner.idempotency_token(input.into());
            self
        }
        /// <p>A customer-chosen string that you can use to distinguish between otherwise identical calls to <code>UpdateReportPlanInput</code>. Retrying a successful request with the same idempotency token results in a success message with no action taken.</p>
        pub fn set_idempotency_token(
            mut self,
            input: std::option::Option<std::string::String>,
        ) -> Self {
            self.inner = self.inner.set_idempotency_token(input);
            self
        }
    }
}

impl Client {
    /// Creates a client with the given service config and connector override.
    pub fn from_conf_conn<C, E>(conf: crate::Config, conn: C) -> Self
    where
        C: aws_smithy_client::bounds::SmithyConnector<Error = E> + Send + 'static,
        E: Into<aws_smithy_http::result::ConnectorError>,
    {
        let retry_config = conf
            .retry_config()
            .cloned()
            .unwrap_or_else(aws_smithy_types::retry::RetryConfig::disabled);
        let timeout_config = conf.timeout_config().cloned().unwrap_or_default();
        let mut builder = aws_smithy_client::Builder::new()
            .connector(aws_smithy_client::erase::DynConnector::new(conn))
            .middleware(aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ));
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        if let Some(sleep_impl) = conf.sleep_impl() {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();
        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }

    /// Creates a new client from a shared config.
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn new(sdk_config: &aws_types::sdk_config::SdkConfig) -> Self {
        Self::from_conf(sdk_config.into())
    }

    /// Creates a new client from the service [`Config`](crate::Config).
    #[cfg(any(feature = "rustls", feature = "native-tls"))]
    pub fn from_conf(conf: crate::Config) -> Self {
        let retry_config = conf
            .retry_config()
            .cloned()
            .unwrap_or_else(aws_smithy_types::retry::RetryConfig::disabled);
        let timeout_config = conf.timeout_config().cloned().unwrap_or_default();
        let sleep_impl = conf.sleep_impl();
        if (retry_config.has_retry() || timeout_config.has_timeouts()) && sleep_impl.is_none() {
            panic!("An async sleep implementation is required for retries or timeouts to work. \
                                    Set the `sleep_impl` on the Config passed into this function to fix this panic.");
        }
        let mut builder = aws_smithy_client::Builder::dyn_https().middleware(
            aws_smithy_client::erase::DynMiddleware::new(
                crate::middleware::DefaultMiddleware::new(),
            ),
        );
        builder.set_retry_config(retry_config.into());
        builder.set_timeout_config(timeout_config);
        // the builder maintains a try-state. To avoid suppressing the warning when sleep is unset,
        // only set it if we actually have a sleep impl.
        if let Some(sleep_impl) = sleep_impl {
            builder.set_sleep_impl(Some(sleep_impl));
        }
        let client = builder.build();

        Self {
            handle: std::sync::Arc::new(Handle { client, conf }),
        }
    }
}