accounts.go

package storage

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"context"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/tracing"
	"net/http"
)

// AccountsClient is the the Storage Management Client.
type AccountsClient struct {
	BaseClient
}

// NewAccountsClient creates an instance of the AccountsClient client.
func NewAccountsClient(subscriptionID string) AccountsClient {
	return NewAccountsClientWithBaseURI(DefaultBaseURI, subscriptionID)
}

// NewAccountsClientWithBaseURI creates an instance of the AccountsClient client using a custom endpoint.  Use this
// when interacting with an Azure cloud that uses a non-standard base URI (sovereign clouds, Azure stack).
func NewAccountsClientWithBaseURI(baseURI string, subscriptionID string) AccountsClient {
	return AccountsClient{NewWithBaseURI(baseURI, subscriptionID)}
}

// CheckNameAvailability checks that account name is valid and is not in use.
// Parameters:
// accountName - the name of the storage account within the specified resource group. Storage account names
// must be between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) CheckNameAvailability(ctx context.Context, accountName AccountCheckNameAvailabilityParameters) (result CheckNameAvailabilityResult, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.CheckNameAvailability")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.CheckNameAvailabilityPreparer(ctx, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", nil, "Failure preparing request")
		return
	}

	resp, err := client.CheckNameAvailabilitySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure sending request")
		return
	}

	result, err = client.CheckNameAvailabilityResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure responding to request")
	}

	return
}

// CheckNameAvailabilityPreparer prepares the CheckNameAvailability request.
func (client AccountsClient) CheckNameAvailabilityPreparer(ctx context.Context, accountName AccountCheckNameAvailabilityParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/checkNameAvailability", pathParameters),
		autorest.WithJSON(accountName),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CheckNameAvailabilitySender sends the CheckNameAvailability request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) CheckNameAvailabilitySender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// CheckNameAvailabilityResponder handles the response to the CheckNameAvailability request. The method always
// closes the http.Response Body.
func (client AccountsClient) CheckNameAvailabilityResponder(resp *http.Response) (result CheckNameAvailabilityResult, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Create asynchronously creates a new storage account with the specified parameters. Existing accounts cannot be
// updated with this API and should instead use the Update Storage Account API. If an account is already created and
// subsequent PUT request is issued with exact same set of properties, then HTTP 200 would be returned.
// Parameters:
// resourceGroupName - the name of the resource group within the user's subscription.
// accountName - the name of the storage account within the specified resource group. Storage account names
// must be between 3 and 24 characters in length and use numbers and lower-case letters only.
// parameters - the parameters to provide for the created account.
func (client AccountsClient) Create(ctx context.Context, resourceGroupName string, accountName string, parameters AccountCreateParameters) (result AccountsCreateFuture, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.Create")
		defer func() {
			sc := -1
			if result.Response() != nil {
				sc = result.Response().StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.CreatePreparer(ctx, resourceGroupName, accountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", nil, "Failure preparing request")
		return
	}

	result, err = client.CreateSender(req)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", result.Response(), "Failure sending request")
		return
	}

	return
}

// CreatePreparer prepares the Create request.
func (client AccountsClient) CreatePreparer(ctx context.Context, resourceGroupName string, accountName string, parameters AccountCreateParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// CreateSender sends the Create request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) CreateSender(req *http.Request) (future AccountsCreateFuture, err error) {
	var resp *http.Response
	resp, err = client.Send(req, azure.DoRetryWithRegistration(client.Client))
	if err != nil {
		return
	}
	future.Future, err = azure.NewFutureFromResponse(resp)
	return
}

// CreateResponder handles the response to the Create request. The method always
// closes the http.Response Body.
func (client AccountsClient) CreateResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete deletes a storage account in Microsoft Azure.
// Parameters:
// resourceGroupName - the name of the resource group within the user's subscription.
// accountName - the name of the storage account within the specified resource group. Storage account names
// must be between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) Delete(ctx context.Context, resourceGroupName string, accountName string) (result autorest.Response, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.Delete")
		defer func() {
			sc := -1
			if result.Response != nil {
				sc = result.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.DeletePreparer(ctx, resourceGroupName, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure responding to request")
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client AccountsClient) DeletePreparer(ctx context.Context, resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) DeleteSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client AccountsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// GetProperties returns the properties for the specified storage account including but not limited to name, account
// type, location, and account status. The ListKeys operation should be used to retrieve storage keys.
// Parameters:
// resourceGroupName - the name of the resource group within the user's subscription.
// accountName - the name of the storage account within the specified resource group. Storage account names
// must be between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) GetProperties(ctx context.Context, resourceGroupName string, accountName string) (result Account, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.GetProperties")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.GetPropertiesPreparer(ctx, resourceGroupName, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetPropertiesSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure sending request")
		return
	}

	result, err = client.GetPropertiesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure responding to request")
	}

	return
}

// GetPropertiesPreparer prepares the GetProperties request.
func (client AccountsClient) GetPropertiesPreparer(ctx context.Context, resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// GetPropertiesSender sends the GetProperties request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) GetPropertiesSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// GetPropertiesResponder handles the response to the GetProperties request. The method always
// closes the http.Response Body.
func (client AccountsClient) GetPropertiesResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List lists all the storage accounts available under the subscription. Note that storage keys are not returned; use
// the ListKeys operation for this.
func (client AccountsClient) List(ctx context.Context) (result AccountListResultPage, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.List")
		defer func() {
			sc := -1
			if result.alr.Response.Response != nil {
				sc = result.alr.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	result.fn = client.listNextResults
	req, err := client.ListPreparer(ctx)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.alr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure sending request")
		return
	}

	result.alr, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure responding to request")
	}
	if result.alr.hasNextLink() && result.alr.IsEmpty() {
		err = result.NextWithContext(ctx)
	}

	return
}

// ListPreparer prepares the List request.
func (client AccountsClient) ListPreparer(ctx context.Context) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/storageAccounts", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListResponder(resp *http.Response) (result AccountListResult, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listNextResults retrieves the next set of results, if any.
func (client AccountsClient) listNextResults(ctx context.Context, lastResults AccountListResult) (result AccountListResult, err error) {
	req, err := lastResults.accountListResultPreparer(ctx)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "listNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "listNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "listNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListComplete enumerates all values, automatically crossing page boundaries as required.
func (client AccountsClient) ListComplete(ctx context.Context) (result AccountListResultIterator, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.List")
		defer func() {
			sc := -1
			if result.Response().Response.Response != nil {
				sc = result.page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	result.page, err = client.List(ctx)
	return
}

// ListByResourceGroup lists all the storage accounts available under the given resource group. Note that storage keys
// are not returned; use the ListKeys operation for this.
// Parameters:
// resourceGroupName - the name of the resource group within the user's subscription.
func (client AccountsClient) ListByResourceGroup(ctx context.Context, resourceGroupName string) (result AccountListResultPage, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.ListByResourceGroup")
		defer func() {
			sc := -1
			if result.alr.Response.Response != nil {
				sc = result.alr.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	result.fn = client.listByResourceGroupNextResults
	req, err := client.ListByResourceGroupPreparer(ctx, resourceGroupName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.alr.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure sending request")
		return
	}

	result.alr, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure responding to request")
	}
	if result.alr.hasNextLink() && result.alr.IsEmpty() {
		err = result.NextWithContext(ctx)
	}

	return
}

// ListByResourceGroupPreparer prepares the ListByResourceGroup request.
func (client AccountsClient) ListByResourceGroupPreparer(ctx context.Context, resourceGroupName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListByResourceGroupSender sends the ListByResourceGroup request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListByResourceGroupSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// ListByResourceGroupResponder handles the response to the ListByResourceGroup request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListByResourceGroupResponder(resp *http.Response) (result AccountListResult, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// listByResourceGroupNextResults retrieves the next set of results, if any.
func (client AccountsClient) listByResourceGroupNextResults(ctx context.Context, lastResults AccountListResult) (result AccountListResult, err error) {
	req, err := lastResults.accountListResultPreparer(ctx)
	if err != nil {
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "listByResourceGroupNextResults", nil, "Failure preparing next results request")
	}
	if req == nil {
		return
	}
	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		return result, autorest.NewErrorWithError(err, "storage.AccountsClient", "listByResourceGroupNextResults", resp, "Failure sending next results request")
	}
	result, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "listByResourceGroupNextResults", resp, "Failure responding to next results request")
	}
	return
}

// ListByResourceGroupComplete enumerates all values, automatically crossing page boundaries as required.
func (client AccountsClient) ListByResourceGroupComplete(ctx context.Context, resourceGroupName string) (result AccountListResultIterator, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.ListByResourceGroup")
		defer func() {
			sc := -1
			if result.Response().Response.Response != nil {
				sc = result.page.Response().Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	result.page, err = client.ListByResourceGroup(ctx, resourceGroupName)
	return
}

// ListKeys lists the access keys for the specified storage account.
// Parameters:
// resourceGroupName - the name of the resource group.
// accountName - the name of the storage account.
func (client AccountsClient) ListKeys(ctx context.Context, resourceGroupName string, accountName string) (result AccountKeys, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.ListKeys")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.ListKeysPreparer(ctx, resourceGroupName, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure sending request")
		return
	}

	result, err = client.ListKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure responding to request")
	}

	return
}

// ListKeysPreparer prepares the ListKeys request.
func (client AccountsClient) ListKeysPreparer(ctx context.Context, resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/listKeys", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// ListKeysSender sends the ListKeys request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListKeysSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// ListKeysResponder handles the response to the ListKeys request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListKeysResponder(resp *http.Response) (result AccountKeys, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RegenerateKey regenerates the access keys for the specified storage account.
// Parameters:
// resourceGroupName - the name of the resource group within the user's subscription.
// accountName - the name of the storage account within the specified resource group. Storage account names
// must be between 3 and 24 characters in length and use numbers and lower-case letters only.
// regenerateKey - specifies name of the key which should be regenerated.
func (client AccountsClient) RegenerateKey(ctx context.Context, resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (result AccountKeys, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.RegenerateKey")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.RegenerateKeyPreparer(ctx, resourceGroupName, accountName, regenerateKey)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.RegenerateKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure sending request")
		return
	}

	result, err = client.RegenerateKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure responding to request")
	}

	return
}

// RegenerateKeyPreparer prepares the RegenerateKey request.
func (client AccountsClient) RegenerateKeyPreparer(ctx context.Context, resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/regenerateKey", pathParameters),
		autorest.WithJSON(regenerateKey),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// RegenerateKeySender sends the RegenerateKey request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) RegenerateKeySender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// RegenerateKeyResponder handles the response to the RegenerateKey request. The method always
// closes the http.Response Body.
func (client AccountsClient) RegenerateKeyResponder(resp *http.Response) (result AccountKeys, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Update updates the account type or tags for a storage account. It can also be used to add a custom domain (note that
// custom domains cannot be added via the Create operation). Only one custom domain is supported per storage account.
// This API can only be used to update one of tags, accountType, or customDomain per call. To update multiple of these
// properties, call the API multiple times with one change per call. This call does not change the storage keys for the
// account. If you want to change storage account keys, use the RegenerateKey operation. The location and name of the
// storage account cannot be changed after creation.
// Parameters:
// resourceGroupName - the name of the resource group within the user's subscription.
// accountName - the name of the storage account within the specified resource group. Storage account names
// must be between 3 and 24 characters in length and use numbers and lower-case letters only.
// parameters - the parameters to update on the account. Note that only one property can be changed at a time
// using this API.
func (client AccountsClient) Update(ctx context.Context, resourceGroupName string, accountName string, parameters AccountUpdateParameters) (result Account, err error) {
	if tracing.IsEnabled() {
		ctx = tracing.StartSpan(ctx, fqdn+"/AccountsClient.Update")
		defer func() {
			sc := -1
			if result.Response.Response != nil {
				sc = result.Response.Response.StatusCode
			}
			tracing.EndSpan(ctx, sc, err)
		}()
	}
	req, err := client.UpdatePreparer(ctx, resourceGroupName, accountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure responding to request")
	}

	return
}

// UpdatePreparer prepares the Update request.
func (client AccountsClient) UpdatePreparer(ctx context.Context, resourceGroupName string, accountName string, parameters AccountUpdateParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2015-05-01-preview"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsContentType("application/json; charset=utf-8"),
		autorest.AsPatch(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare((&http.Request{}).WithContext(ctx))
}

// UpdateSender sends the Update request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) UpdateSender(req *http.Request) (*http.Response, error) {
	return client.Send(req, azure.DoRetryWithRegistration(client.Client))
}

// UpdateResponder handles the response to the Update request. The method always
// closes the http.Response Body.
func (client AccountsClient) UpdateResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}