This repository contains my implementation for the Deej Volume mixer that I created. It's a 5 channel mixer with RGB LED strips.
The mixer supports themes and brightness control which get stored into the EEPROM so your settings are remembers if you power it down!
- Here's a making-off video: https://www.youtube.com/watch?v=anTwEfMaGJQ
- How theme selection/brightness works: https://www.youtube.com/watch?v=iqhkKfsA3G0
- You can check out the models here: https://makerworld.com/en/models/419682#profileId-322350
I'm running this on an Arduino Nano3 with the sliders connected to A0, A1, A2, A3, A4 and the LED data strips connected to pin 6, 5, 4, 3 and 2. You can change the code anyway you want to!
For the PC side you need deej: https://github.com/omriharel/deej this repo will explain how to configure it and get things running!
- You need 12x5 LEDs on a 144 led p/meter strip: https://nl.aliexpress.com/item/1005005574282373.html
- You need 5 linear sliders: https://nl.aliexpress.com/item/1005006614304157.html
Also you'll need some M3 screws, M4 screws and M3/M4 heated inserts.
- I got these inserts: https://nl.aliexpress.com/item/1005004870993068.html
- And M3/M4 screws from here: https://nl.aliexpress.com/item/1005006034879477.html