make regression work with new config files

Before, "make install" has delivered a preconfigured config file. However, as newer bareos versions work with configuration directories, we copied the old bareos-*.conf to scripts. However, it seams regression expects them somehow different. Not sure what exactly. Anyhow, we make it work and strip down bareos-dir.conf.
bareos · Jul 12, 2016 · 41256fa · 41256fa
1 parent 8364241
commit 41256fa
Show file tree

Hide file tree

Showing 8 changed files with 33 additions and 102 deletions.
diff --git a/Makefile b/Makefile
@@ -34,9 +34,6 @@ bareos: all
 sed:
 	echo "Doing: scripts/do_sed"
 	scripts/do_sed
-	echo "adapting default fileset for regression tests"
-	cp bin/bareos-dir.conf bin/bareos-dir.conf.orig
-	sed 's#File.*/$$#File = /usr/sbin#g'  < bin/bareos-dir.conf.orig > bin/bareos-dir.conf
 
 # Run all disk tests
 test:

diff --git a/README b/README
@@ -16,6 +16,8 @@ To set it up, create your personal configuration file, by
 copying prototype.conf to config or simply editing prototype.conf
 directly then copying it to the file config.
 
+cp prototype.conf config
+
 You must end up with a file named config in the main regress
 directory that has all the specifications that correspond to
 your system.

diff --git a/configs/scsi-crypto-test/bareos-dir.conf.scsi-crypto-test.in b/configs/scsi-crypto-test/bareos-dir.conf.scsi-crypto-test.in
@@ -239,8 +239,9 @@ Storage {
 # Generic catalog service
 Catalog {
   Name = MyCatalog
-
-  dbname = regress; user = root; password = ""
+  dbname = "@db_name@"
+  dbuser = "@db_user@"
+  dbpassword = "@db_password@"
 }
 
 # Reasonable message delivery -- send most everything to email address

diff --git a/configs/status-schedule-test/bareos-dir.conf.status-schedule-test.in b/configs/status-schedule-test/bareos-dir.conf.status-schedule-test.in
@@ -82,7 +82,9 @@ Storage {
 Catalog {
   Name = MyCatalog
 
-  dbname = regress; user = root; password = ""
+  dbname = @db_name@
+  dbuser = "@db_user@"
+  dbpassword = "@db_password@"
 }
 
 Messages {

diff --git a/scripts/bareos-dir.conf.in b/scripts/bareos-dir.conf.in
@@ -1,27 +1,4 @@
 #
-# Default Bareos Director configuration file for disk-only backup
-#
-# Each configuration item has a reference number that shows
-# where this property can be changed in the configuration file.
-# Search for the number to find the correct line.
-#
-# You have to configure the following accoring to your environment:
-#
-# (#01)Email Address for bareos disaster recovery.
-#      Specify a mailaddress outside of your backupserver.
-#      There will be one mail per day.
-#
-# (#02)Email Address for bareos reports. (Mail Command)
-#      This mail address will recieve a report about each backup job.
-#      It will be sent after the backupjob is complete.
-#      Has to be configured twice ("Standard" and "Daemon" Message Ressources)
-#
-# (#03)Email Address for bareos operator. (Operator Command)
-#      This mail address will recieve a mail immediately when the
-#      bareos system needs an operator intervention.
-#      May be the same address as in (#02)
-#
-#
 # This disk-only setup stores all data into @archivedir@
 #
 # The preconfigured backup scheme is as follows:
@@ -48,15 +25,9 @@ Director {                            # define myself
   QueryFile = "@scriptdir@/query.sql"
   Maximum Concurrent Jobs = 10
   Password = "@dir_password@"         # Console password
-  Messages = Daemon
+  Messages = Standard
   Auditing = yes
 
-  # Enable the Heartbeat if you experience connection losses
-  # (eg. because of your router or firewall configuration).
-  # Additionally the Heartbeat can be enabled in bareos-sd and bareos-fd.
-  #
-  # Heartbeat Interval = 1m
-
   # remove comment in next line to load dynamic backends from specified directory
   # Backend Directory = @backenddir@
 
@@ -73,8 +44,7 @@ JobDefs {
   Type = Backup
   Level = Incremental
   Client = @basename@-fd
-  FileSet = "SelfTest"                     # selftest fileset                            (#13)
-  Schedule = "WeeklyCycle"
+  FileSet = "SelfTest"
   Storage = File
   Messages = Standard
   Pool = Incremental
@@ -132,26 +102,6 @@ Job {
   Where = /tmp/bareos-restores
 }
 
-
-FileSet {
-  Name = "Windows All Drives"
-  Enable VSS = yes
-  Include {
-    Options {
-      Signature = MD5
-      Drive Type = fixed
-      IgnoreCase = yes
-      WildFile = "[A-Z]:/pagefile.sys"
-      WildDir = "[A-Z]:/RECYCLER"
-      WildDir = "[A-Z]:/$RECYCLE.BIN"
-      WildDir = "[A-Z]:/System Volume Information"
-      Exclude = yes
-    }
-    File = /
-  }
-}
-
-
 FileSet {
   Name = "Linux All"
   Include {
@@ -180,32 +130,28 @@ FileSet {
     File = /.journal
     File = /.fsck
   }
+}
 
+FileSet {
+ Name = FS_TESTJOB1
+ Include {
+   Options {
+    Signature = MD5
+   }
+   File=<@tmpdir@/file-list
+ }
 }
 
-# fileset just to backup some files for selftest
 FileSet {
   Name = "SelfTest"
   Include {
     Options {
-      Signature = MD5 # calculate md5 checksum per file
+      Signature = MD5
     }
-    File = "@sbindir@"
+    File = "@builddir@"
   }
 }
 
-Schedule {
-  Name = "WeeklyCycle"
-  Run = Full 1st sat at 21:00                   # (#04)
-  Run = Differential 2nd-5th sat at 21:00       # (#07)
-  Run = Incremental mon-fri at 21:00            # (#10)
-}
-
-# This schedule does the catalog. It starts after the WeeklyCycle
-Schedule {
-  Name = "WeeklyCycleAfterBackup"
-  Run = Full mon-fri at 21:10
-}
 
 # This is the backup of the catalog
 FileSet {
@@ -243,8 +189,6 @@ Storage {
 #
 Catalog {
   Name = MyCatalog
-  # Uncomment the following lines if you want the dbi driver
-  @uncomment_dbi@ dbdriver = "dbi:@DEFAULT_DB_TYPE@"; dbaddress = 127.0.0.1; dbport = @db_port@
   #dbdriver = "@DEFAULT_DB_TYPE@"
   dbdriver = "XXX_REPLACE_WITH_DATABASE_DRIVER_XXX"
   dbname = "@db_name@"
@@ -257,27 +201,10 @@ Catalog {
 #
 Messages {
   Name = Standard
-  mailcommand = "@bindir@/bsmtp -h @smtp_host@ -f \"\(Bareos\) \<%r\>\" -s \"Bareos: %t %e of %c %l\" %r"
-  operatorcommand = "@bindir@/bsmtp -h @smtp_host@ -f \"\(Bareos\) \<%r\>\" -s \"Bareos: Intervention needed for %j\" %r"
-  mail = @job_email@ = all, !skipped, !audit # (#02)
-  operator = @job_email@ = mount     # (#03)
   console = all, !skipped, !saved, !audit
-  append = "@logdir@/bareos.log" = all, !skipped, !audit
   catalog = all, !audit
 }
 
-#
-# Message delivery for daemon messages (no job).
-#
-Messages {
-  Name = Daemon
-  mailcommand = "@bindir@/bsmtp -h @smtp_host@ -f \"\(Bareos\) \<%r\>\" -s \"Bareos daemon message\" %r"
-  mail = @job_email@ = all, !skipped, !audit # (#02)
-  console = all, !skipped, !saved, !audit
-  append = "@logdir@/bareos.log" = all, !skipped, !audit
-  append = "@logdir@/bareos-audit.log" = audit
-}
-
 #
 # Full Pool definition
 #

diff --git a/scripts/create_sed b/scripts/create_sed
@@ -32,9 +32,13 @@ dbengine=`echo ${WHICHDB} | sed -e 's/--with-//' -e 's/=.*//'`
 bversion=`sed -n -e 's/^.*VERSION.*"\(.*\)"$/\1/p' ${srcdir}/src/include/version.h`
 bdate=`sed -n -e 's/^.*LSMDATE.*"\(.*\)"$/\1/p' ${srcdir}/src/include/version.h`
 builddir="${src}"
+hostname="${hostname:-$HOST}"
 
 # Create sed command script
-echo "s%@sbindir@%${bin}%g" >${out}
+>${out}
+echo "s%@archivedir@%${tmp}%g" >>${out}
+echo "s%@bindir@%${bin}%g" >>${out}
+echo "s%@sbindir@%${bin}%g" >>${out}
 echo "s%@scriptdir@%${scripts}%g" >>${out}
 echo "s%@working_dir@%${working}%g" >>${out}
 echo "s%@piddir@%${working}%g" >>${out}
@@ -44,11 +48,11 @@ echo "s%@autochanger@%${AUTOCHANGER}%g" >>${out}
 echo "s%@changer_script@%${AUTOCHANGER_SCRIPT}%g" >>${out}
 echo "s%@tmpdir@%${tmp}%g" >>${out}
 echo "s%@logdir@%${tmp}%g" >>${out}
-echo "s%@hostname@%${HOST}%g" >>${out}
 echo "s%@changer_path@%${AUTOCHANGER_PATH}%g" >>${out}
 echo "s%@tape_drive1@%${TAPE_DRIVE1}%g" >>${out}
 echo "s%@smtp_host@%${SMTP_HOST}%g" >>${out}
 echo "s%@disk_drive@%${tmp}/disk-changer%g" >>${out}
+echo "s%@basename@%${HOST}%g" >>${out}
 echo "s%@hostname@%${hostname}%g" >>${out}
 echo "s%@hostname1@%${hostname1}%g" >>${out}
 echo "s%@hostname2@%${hostname2}%g" >>${out}
@@ -61,6 +65,7 @@ echo "s%@hostname1_password@%${hostname1_password}%g" >>${out}
 echo "s%@hostname2_password@%${hostname2_password}%g" >>${out}
 echo "s%@hostname3_password@%${hostname3_password}%g" >>${out}
 echo "s%@dirport@%${dirport}%g" >>${out}
+echo "s%@dir_port@%${dirport}%g" >>${out}
 echo "s%@sdport@%${sdport}%g" >>${out}
 echo "s%@sdport2@%${sdport2}%g" >>${out}
 echo "s%@fdport@%${fdport}%g" >>${out}
@@ -84,3 +89,4 @@ echo "s%@db_password@%${db_password}%g" >>${out}
 echo "s%@builddir@%${builddir}%g" >>${out}
 echo "s%@BUILD_DIR@%${builddir}%g" >>${out}
 echo "s%@confdir@%${scripts}%g" >>${out}
+echo "s%@uncomment_dbi@%#%g" >>${out}
diff --git a/scripts/setup b/scripts/setup
@@ -154,8 +154,3 @@ cd ${cwd}
 #
 bin/bareos start
 bin/bareos stop
-
-#
-# Save Bareos default conf files for later use
-#
-cp -f bin/*.conf scripts
diff --git a/tests/acl-xattr-test b/tests/acl-xattr-test
@@ -100,6 +100,7 @@ rm -rf $d
 mkdir -p $d
 mkdir -p $d/acl-dir
 cp ${cwd}/bin/bconsole $d
+ls -la $d
 
 case `uname -s` in
    Linux)
@@ -208,7 +209,7 @@ cat <<END_OF_DATA >${cwd}/tmp/bconcmds
 @$out /dev/null
 messages
 @$out ${cwd}/tmp/log1.out
-label volume=TestVolume001 storage=File1 pool=Full slot=1 drive=0
+label volume=TestVolume001 storage=File pool=Full slot=1 drive=0
 @#setdebug level=400 trace=1 client
 @#setdebug level=300 trace=1 director
 @#setdebug level=300 trace=1 storage=File1
@@ -219,15 +220,15 @@ messages
 @# now do a restore
 @#
 @$out ${cwd}/tmp/log2.out
-restore where=${cwd}/tmp/bareos-restores select all done
+restore restorejob=RestoreFiles where=${cwd}/tmp/bareos-restores select all done
 yes
 wait
 messages
 quit
 END_OF_DATA
 
 run_bareos
-check_for_zombie_jobs storage=File1
+check_for_zombie_jobs storage=File
 stop_bareos
 
 rd=$cwd/tmp/bareos-restores$cwd/build/acl