Parsing of section statgrab_net failed

[sourceforge807]

Hi,

i have the following problem with client: In check mk it results in an errormessage "Parsing of section statgrab_net failed" when i have vlans in opnsense with the naming "vlan0.10", "vlan0.12" and so on. The othe interfaces ("lan", "wan") in checkmk where shown as vanished services.
Without these named vlans it is all ok.

Referenced to /cmk/base/plugins/agent_based/inventory_statgrab_net.py line 20 there is a split wich will crash with output of the check.

Relevant agent output:

<<<statgrab_net>>>
vtnet0.mtu 1500
vtnet0.ipackets 850605
vtnet0.ierror 0
vtnet0.idrop 0
vtnet0.rx 111443544
vtnet0.opackets 722513
vtnet0.oerror 0
[...]
vlan0.10.mtu 1500
vlan0.10.ipackets 6838
vlan0.10.ierror 0
vlan0.10.idrop 0
vlan0.10.rx 191548
vlan0.10.opackets 215
vlan0.10.oerror 0
[...]

The naming "vlan0.XX" where made in opnsense: interfaces -> other -> VLAN -> Edit vlan0.XX -> device

Thanks a lot!

[Setsua]

Interfaces aren't visible in checkmk.

checkmk version: 2.1.0p25
agent version: 0.99.2

[root@OPNsense ~]# /usr/bin/netstat -i -b -d -n -W -f link
Name       Mtu Network            Address              Ipkts Ierrs Idrop     Ibytes    Opkts Oerrs     Obytes  Coll  Drop
igc0      1500 <Link#1>           aa:bb:cc:11:22:33 75184337     0     0 98298281886 49062740     0 17215226957     0     0
igc1      1500 <Link#2>           aa:bb:cc:11:22:33 31075168     0     0 2172642511 66459418     0 92608725366     0  1033
igc2      1500 <Link#3>           aa:bb:cc:11:22:33 20522795     0     0 16530136328 11024261     0 6648523619     0     0
igc3*     1500 <Link#4>           aa:bb:cc:11:22:33        0     0     0          0        0     0          0     0     0
lo0      16384 <Link#5>           lo0                  45528     0     0    8016768    45528     0    8016768     0     0
enc0*     1536 <Link#6>           enc0                     0     0     0          0        0     0          0     0     0
pflog0*  33160 <Link#7>           pflog0                   0     0     0          0  1065553     0   75302523     0     0
pfsync0*  1500 <Link#8>           pfsync0                  0     0     0          0        0     0          0     0     0
vlan0.20  1500 <Link#9>           aa:bb:cc:11:22:33        0     0     0          0        1     1         42     0     0
vlan0.30  1500 <Link#10>          aa:bb:cc:11:22:33        0     0     0          0        1     1         42     0     0
vlan0.40  1500 <Link#11>          aa:bb:cc:11:22:33    28842     0     0    5643954    49795     1   48604978     0     0
vlan0.50  1500 <Link#12>          aa:bb:cc:11:22:33   478043     0     0   89660493   741741     2  715774608     0     0
vlan0.7   1500 <Link#13>          aa:bb:cc:11:22:33 75180749     0     0 97996973505 49046489     0 17013002403     0     0
pppoe0    1492 <Link#14>          pppoe0            75175319     0     0 96342811991 49041059     0 15933936085     0     0

[Setsua]

The solution for me was to rename my vlan interfaces so they don't have a dot in its name.
vlan0.20 -> vlan020
Don't forget to BACKUP your config.
Be careful. The assignment had to be deleted.

The easiest solution is propably to download the config and rename the vlan interfaces and import it again.

[thorstenspille]

Please check testing branch, should be fixed with e1c5d1a